ABB TMAX XT1C 160 Circuit Breaker User Manual

Entwodiksyon

This manual provides essential information for the safe and effective installation, operation, and maintenance of the ABB TMAX XT1C 160 Molded Case Circuit Breaker (MCCB). Please read this manual thoroughly before attempting any installation or operation.

Enfòmasyon sou Sekirite

WARNING: Electrical shock hazard. Only qualified personnel should install, operate, or maintain this device.

• Disconnect all power before working on the circuit breaker.
• Sèvi ak ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou gan izole ak pwoteksyon pou je.
• Swiv tout kòd ak règleman elektrik lokal ak nasyonal yo.
• Do not operate the circuit breaker if it is visibly damaged or if any components are missing.
• Asire bon koneksyon atè kote sa nesesè.

Pwodwi souview

The ABB TMAX XT1C 160 is a 3-pole fixed molded case circuit breaker with a thermomagnetic release, designed for protection against overloads and short circuits in electrical systems. It features front terminals for easy connection.

This image shows the ABB TMAX XT1C 160 circuit breaker. Key features visible include the ABB logo, the SACE Tmax branding, the 'off' position indicator, and the current rating adjustment dials (MED 106A, MAX 125A). The top section displays technical specifications such as rated operational voltage (Ue), rated ultimate short-circuit breaking capacity (Icu), and rated impulse withstand voltage (Uimp). The breaker is a 3-pole design with front terminals.

Espesifikasyon teknik

Enstalasyon

Anvan enstalasyon: Ensure the power supply is disconnected and locked out according to safety procedures. Verify the circuit breaker's ratings match the application requirements.

Montaj

The XT1C 160 is designed for DIN rail mounting.

1. Securely attach the DIN rail to the mounting surface in the electrical enclosure.
2. Align the circuit breaker's rear clips with the DIN rail.
3. Press firmly until the breaker clicks into place, ensuring it is securely fastened.

Fil elektrik

Connect the power supply and load cables to the designated front terminals.

• Connect incoming phase conductors to the top terminals (L1, L2, L3).
• Connect outgoing load conductors to the bottom terminals (T1, T2, T3).
• Ensure all connections are tight and secure to prevent overheating and arcing. Use a torque wrench to achieve specified torque values.
• Use appropriate wire gauges for the current rating to avoid overheating.

Operasyon

Chanje On/Off

The circuit breaker has a toggle handle for manual operation.

• To switch ON: Push the handle upwards to the "ON" position.
• To switch OFF: Push the handle downwards to the "OFF" position.
• In case of a trip: The handle will move to an intermediate "TRIP" position. To reset, push the handle fully down to "OFF" first, then push it up to "ON".

Current Adjustment (TMD Release)

The thermomagnetic release allows for adjustment of the rated current (In) and instantaneous trip setting.

• The nominal current (In) can be set between 106A (MED) and 125A (MAX) using the adjustment dial on the front face of the breaker.
• The instantaneous trip setting (Ii) is typically fixed or adjustable within a specific range, as indicated on the device's label. Consult the product datasheet for precise values.

Antretyen

Regular maintenance ensures the longevity and reliable operation of the circuit breaker. Always disconnect power before performing any maintenance.

• Enspeksyon peryodik: Visually inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections. Check for dust accumulation, especially in ventilation openings.
• Netwayaj: Disconnect power before cleaning. Use a dry, clean, lint-free cloth to wipe the exterior. Do not use solvents, abrasive cleaners, or liquids that could enter the breaker.
• Sere Tèminal: Periodically check the tightness of all terminal connections. Loose connections can lead to increased resistance, overheating, and potential failure.
• Tès Fonksyonèl: If possible and safe, perform periodic functional tests according to ABB guidelines or relevant industry standards to verify proper tripping characteristics.

Depanaj

Garanti ak sipò

For detailed warranty information and technical support, please refer to the official ABB website or contact your authorized ABB distributor. Keep your purchase receipt for warranty claims.

Manifakti: ABB

ASIN: B07JJL7XGD

Date First Available: July 3, 2019

Pou plis asistans, vizite ABB Store on Amazon.