Manyèl Enstriksyon Filtè Ekstèn Fluval 307 la

1. Entwodiksyon

The Fluval 07 series external filter represents the latest generation in aquatic filtration, building on nearly 40 years of innovation from the world's best-selling Fluval external filter range. The Fluval 307 model is engineered to provide powerful and reliable filtration for your aquarium, offering enhanced performance that results in a quieter, more robust, energy-efficient, versatile, and user-friendly experience.

This manual provides essential information for the proper installation, operation, and maintenance of your Fluval 307 External Filter. Please read all instructions carefully before use to ensure safe and efficient operation.

Figure 1: Fluval 307 External Filter unit. This image displays the main filter canister with its red and black AquaStop valve assembly on top, and grey locking clamps on the side.

2. Enfòmasyon sou Sekirite

• Toujou dekonekte ekipman pou kouran an anvan ou fè nenpòt antretyen oswa netwayaj.
• Ensure the filter is placed on a stable, level surface below the aquarium water level to allow for proper siphoning and operation.
• Pa sèvi ak filtè a si kòd kouran an oswa ploge a domaje.
• This appliance is intended for indoor use only. Do not expose to water or rain.
• Kenbe soti nan atenn timoun yo.
• Asire w tout koneksyon yo byen fèm pou anpeche flit.

3. Pake kontni

Verify that all components listed below are present in the box:

• Fluval 307 Filter Unit
• Bio-Foam Max Filter Media
• Bio-Foam Filter Media
• Carbon Filter Media (70 g)
• Quick-Clear Filter Media
• Bio-Foam+ Filter Media
• Valv AquaStop
• Ribbed Hosing
• Rim Connectors
• Tib konsomasyon
• Filtre konsomasyon
• Intake Tube with Intake Strainer
• Pre-filtre panyen
• Filtration Basket
• Filtre panyen kouvèti
• Filter Basket Handle
• ventouse (30 mm)
• Bouch pou sòti dlo
• Connectors (2) for Rubber Hose
• Manyèl Enstriksyon

Figure 2: Diagram showing all components included with the Fluval 307 filter, such as the filter unit, pre-filter basket, media cover, baskets, handle, intake assembly, ribbed hosing, output nozzle, rim connector sets, and various authentic Fluval filter media (Bio-Foam, Bio-Foam Max, Carbon, Biomax+, Biofoam+, Quick-Clear).

4. Enstalasyon

1. Debalaj ak enspeksyon: Retire tout konpozan yo nan anbalaj la avèk prekosyon. Enspekte pou wè si gen nenpòt domaj.
2. Filter Media Placement: The filter media should be placed in the baskets in a specific order for optimal filtration. Refer to the diagram below for the recommended layering of mechanical, chemical, and biological media. Ensure the EZ-Lift Media Baskets are properly seated.


Figure 3: Illustrations demonstrating key maintenance features: the AquaStop Valve for easy disconnection, Lift-Lock Motor Head Clamps for quick release, EZ-Lift Media Baskets for simultaneous removal of media, and the Quick Primer for effortless start-ups.

3. Koneksyon kawotchou: Connect the ribbed hosing to the intake and output nozzles of the filter head. Securely attach the rim connectors to the aquarium rim, positioning the intake tube and output nozzle appropriately within the aquarium.
4. Plasman Filtè: Place the filter unit on a flat, stable surface below the aquarium's water level. Ensure there is enough space around the filter for future maintenance.
5. Amorse Filtè a: Once all connections are secure and the filter is positioned, use the Quick Primer handle located on the filter head. Pump the handle several times until water begins to flow into the filter and hoses, indicating that the system is primed.

5. Operasyon Enstriksyon

After successful setup and priming, the filter is ready for operation.

• Limen: Plug the filter's power cord into a grounded electrical outlet. The filter will begin to operate, circulating water through the media.
• Ajisteman koule: The AquaStop valve allows for precise control over water flow. Adjust the lever on the valve to increase or decrease the flow rate as needed for your aquarium's requirements.
• Operasyon trankil: The Fluval 07 series filters are designed with Italian precision, featuring a redesigned mechanism that makes them up to 25% quieter than previous models. This is achieved through components like a precise copper wound bobbin, low wear liquid crystal polymer rotor, diamond-polished alumina shaft, sound dampening shaft support points, recalibrated impeller magnet joint, and rubber feet stabilizers.


Figure 4: Anatomy of the filter's motor head highlighting features contributing to quiet operation, including a precise copper wound bobbin, low wear liquid crystal polymer rotor, diamond-polished alumina shaft, sound dampening shaft support points, recalibrated impeller magnet joint, and rubber feet stabilizers.

• Efikasite enèji: The 07 series filters are highly energy-efficient. The Fluval 307 model operates at 15 Watts (230-240V/50Hz) or 16 Watts (120V/60Hz), minimizing electricity consumption.

Figure 5: Table comparing pump power, energy consumption, and estimated running costs for Fluval 07 series filters (107, 207, 307, 407), emphasizing their low power usage.

6. Antretyen

Regular maintenance is crucial for the longevity and optimal performance of your Fluval 307 filter. The 07 series filters are designed for reduced maintenance time and effort.

• Dekoneksyon: Before any maintenance, unplug the filter from the power outlet. Close the AquaStop valve by pushing the lever down to stop water flow and then disconnect the hose assembly from the filter head.
• Opening the Filter: Release the Lift-Lock Motor Head Clamps on the sides of the filter to remove the motor head.
• Media Cleaning and Replacement: The EZ-Lift Media Baskets allow for easy removal of the entire media stack. Clean mechanical media (foams) regularly by rinsing them in old aquarium water to preserve beneficial bacteria. Chemical media (carbon) should be replaced every 2-4 weeks. Biological media (Biomax) should only be rinsed gently if necessary and rarely replaced.
• Antretyen Enpèlè: Periodically inspect and clean the impeller and impeller housing for any debris or buildup that could affect performance or cause noise.
• Reyasanblaj: After cleaning, reassemble the filter in reverse order, ensuring all baskets are correctly seated and the motor head clamps are securely fastened. Reconnect the AquaStop valve and open the lever before plugging the filter back in.

NAN. Depanaj

If you encounter issues with your Fluval 307 filter, refer to the following common problems and solutions:

• Rediksyon nan koule dlo:
  • Check if filter media is clogged. Clean or replace as necessary.
  • Inspect intake strainer and hosing for blockages.
  • Ensure the AquaStop valve is fully open.
  • Check the impeller for debris or wear.
• Twòp bri:
  • Ensure the filter is properly primed and free of trapped air. Tilt the filter gently to release air bubbles.
  • Check the impeller for foreign objects or damage.
  • Verify the filter is on a stable, level surface and rubber feet stabilizers are in place.
• Fuites:
  • Asire w tout koneksyon tiyo yo sere epi byen fèm.
  • Check the O-ring seal on the motor head for proper seating and lubrication. Replace if damaged.
  • Verify the AquaStop valve is fully closed when disconnected and fully open when operating.
• Filtè a pa kòmanse:
  • Check power connection and electrical outlet.
  • Ensure the filter is properly primed with water.
  • Enspekte turbin lan pou wè si gen nenpòt obstak ki anpeche l vire.

8. Espesifikasyon

Figure 6: Diagram illustrating the dimensions of the Fluval 307 filter: 9.5 inches (24 cm) wide, 7 inches (18 cm) deep, and 16.5 inches (42 cm) high.

Figure 7: Detailed comparison table for Fluval 07 series models (107, 207, 307, 407) including UPC, recommended aquarium size, pump performance, vertical pre-filter area, basket volume, total chamber volume, canister volume, filter dimensions, filter circulation, max water column height, and wattage.

9. Garanti ak sipò

Fluval products are manufactured with high-quality materials and workmanship. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Fluval website. For technical support, replacement parts, or further assistance, please contact Fluval customer service or visit their support portal.

Official Fluval Websit: www.fluvalaquatics.com