BORUIT RJ-3000 Rechargeable LED Headlamp Manyèl itilizatè

1. Pwodwi souview

The BORUIT RJ-3000 is a versatile and durable rechargeable LED headlamp designed for various outdoor and indoor activities. It features multiple lighting modes, including a red light option, and is built to withstand challenging environments.

Image 1.1: The BORUIT RJ-3000 headlamp shown with its included accessories: two rechargeable batteries, a wall charger, a car charger, and a USB-C cable.

Karakteristik kle:

• Mòd limyè miltip: Offers high white light (100%), medium white light (50%), and medium-colored light (50% red).
• Rechargeable: Equipped with USB-C charging for efficient power replenishment. Can also function as an emergency power bank.
• Konsepsyon reglabl: Features a 90° tilt adjustment for directing light precisely.
• Dirab ak Rezistan a move tan: Constructed with a rugged aluminum alloy body and rated IPX5 waterproof, suitable for demanding conditions.

2. Pake kontni

Asire w tout atik yo la lè w ap debale bwat la:

• BORUIT RJ-3000 Headlamp
• 2 x rechargeable pil
• USB-C Chaje Kab
• Mi Charger
• Machin Charger

3. Enstalasyon

3.1 Enstalasyon batri

1. Locate the battery compartment at the rear of the headlamp.
2. Louvri kouvèti lòj la.
3. Insert the two provided rechargeable batteries, ensuring correct polarity (+/-).
4. Byen fèmen kouvèti lòj batri a.

3.2 Premye chaj

Anvan premye itilizasyon an, chaje tèt la nèt.amp pil.

1. Connect the USB-C charging cable to the headlamppò chaje a.
2. Connect the other end of the cable to the provided wall charger or car charger, then plug into a power source.
3. The charging indicator will illuminate (typically red) during charging and change color (e.g., green) when fully charged.

4. Operasyon Enstriksyon

4.1 Pouvwa pou limen/etenn ak seleksyon mòd

Headl laamp features a non-slip switch button for control.

1. Pouvwa sou: Press the power button once to turn on the headlamp.
2. Mòd sik: Subsequent presses of the power button will cycle through the available light modes: High White Light (100%) → Medium White Light (50%) → Medium Red Light (50%).
3. Pouvwa Off: Press the power button after cycling through all modes, or hold the button for a few seconds to turn off directly from any mode.

Imaj 4.1: Yon imaj detaye view nan tèt laamp's non-slip switch button and visual examples of its three primary light modes: high white, low white, and red light.

Image 4.2: The headlamp operating in red light mode, illustrating its utility for activities such as beekeeping, fishing, and hunting, where preserving night vision or minimizing disturbance is crucial.

4.2 Ajisteman Ang

Headl laamp unit can be tilted up to 90 degrees to direct the light beam.

1. Gently hold the headlamp inite.
2. Tilt it to the desired angle. The mechanism is designed to hold its position securely.

Image 4.3: A visual representation of the headlamp's 90-degree rotation capability, demonstrating how the light can be angled for various user needs, such as walking, running, or cycling.

5. Antretyen

5.1 Netwayaj

• Siye tèt laamp body with a soft, damp twal.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Ensure the charging port cover is securely closed to prevent water ingress during cleaning.

5.2 Depo

• Sere tèt laamp nan yon kote ki fre, sèk lè yo pa itilize.
• For long-term storage, it is recommended to partially charge the batteries (around 50%) and recharge them every 3-6 months to maintain battery health.

Image 5.1: The headlamp undergoing a water spray test, confirming its IPX4 waterproof rating, which protects against splashes from any direction.

NAN. Depanaj

• Headlamp pa limen:
  • Check if the batteries are correctly installed with the right polarity.
  • Ensure the batteries are charged. Connect to a power source and observe the charging indicator.
  • Verify that the battery compartment cover is fully closed.
• Pwodiksyon limyè a fèb:
  • The batteries may be low. Recharge the headlamp.
  • Ensure the lens is clean and free from dirt or debris.
• Headlamp does not charge:
  • Check the USB-C cable and charger for damage. Try a different cable or power adapter.
  • Ensure the charging cable is fully inserted into the headlamppò a.

7. Espesifikasyon

8. Garanti ak sipò

For warranty information or technical support, please refer to the product packaging or contact BORUIT customer service directly. Contact details are typically available on the official BORUIT websit la oubyen atravè pwen acha ou a.