UMLIFE XH-W3001 Digital LED Temperature Controller Module User Manual

Pwodwi souview

The UMLIFE XH-W3001 Digital LED Temperature Controller Module is a versatile thermostat switch designed for precise temperature control in various applications. It features a clear digital display and a waterproof NTC10K probe, making it suitable for both heating and cooling modes. Its robust ABS flame retardant housing ensures safety and durability.

Figure 1: UMLIFE XH-W3001 Digital LED Temperature Controller Module with probe and wiring.

Karakteristik kle

• Limyè endikatè ki ap dirije: Displays the current output status for easy monitoring.
• Digital Display Tube: Shows measuring temperature with high accuracy.
• De mòd travay: Supports both heating (start temperature < stop temperature) and cooling (start temperature > stop temperature) operations.
• Lajè ranje tanperati: Operates from -50℃ to 110℃ with a control precision of 0.1℃.
• Lojman dirab: Constructed with ABS flame retardant material for high safety, aging resistance, and durability.
• Sond ki enpèmeyab: Equipped with a 1-meter NTC10K stainless steel probe that is waterproof and rust-resistant.

Enstalasyon ak Fil elektrik

Proper wiring is crucial for the safe and correct operation of the XH-W3001 module. Ensure all connections are secure before applying power.

Figure 2: Wiring diagram for the 12V XH-W3001 model. Connect the 12V input (red/black wires) to your power source. The output (yellow/black wires) connects to your load (e.g., a light bulb or fan). The sensor probe connects to the designated port.

Enstriksyon fil elektrik:

1. Antre pouvwa: Connect the red wire to the positive (+) terminal of your 12V DC power supply and the black wire to the negative (-) terminal.
2. Chaj Sòti: Connect the yellow wire to the positive (+) terminal of your heating or cooling device (load) and the black wire to the negative (-) terminal of the load. Ensure the load's voltage matches the controller's input voltage (12V).
3. Tanperati sonde: Insert the NTC10K waterproof probe into the designated two-pin connector on the module.

Figure 3: Labeled components of the XH-W3001 module, showing the temperature LED display, indicator light, up button, down button, and model number.

Enstriksyon Operasyon

The XH-W3001 has two main parameters to set: the start temperature and the stop temperature.

Setting Start Temperature:

1. Peze epi kenbe la Up bouton (left button) for approximately 3 seconds. The display will start flashing, indicating it's in setting mode.
2. Sèvi ak la Up epi Desann bouton to adjust the desired start temperature.
3. Peze a Up bouton again or wait for 3 seconds for the setting to be saved automatically.

Setting Stop Temperature:

1. Peze epi kenbe la Desann bouton (right button) for approximately 3 seconds. The display will start flashing.
2. Sèvi ak la Up epi Desann bouton to adjust the desired stop temperature.
3. Peze a Desann bouton again or wait for 3 seconds for the setting to be saved automatically.

Mòd operasyon:

• Mòd chofaj: If the Start Temperature is set pi ba than the Stop Temperature, the module will operate in heating mode. The output will turn ON when the temperature drops below the Start Temperature and turn OFF when it reaches the Stop Temperature.
• Mòd refwadisman: If the Start Temperature is set pi wo than the Stop Temperature, the module will operate in cooling mode. The output will turn ON when the temperature rises above the Start Temperature and turn OFF when it drops to the Stop Temperature.

Note: The display shows temperature in Celsius only. There is no option to change to Fahrenheit.

Antretyen

The XH-W3001 module is designed for low maintenance. Regular checks can ensure its longevity and accurate performance.

• Netwayaj: Keep the module and probe clean. Use a soft, dry cloth to wipe the display and housing. For the probe, ensure it is free from debris that might affect temperature readings.
• Koneksyon: Tcheke tout koneksyon fil elektrik yo regilyèman pou asire yo byen fèm epi yo pa gen korozyon. Koneksyon ki lach ka lakòz operasyon an pa rive souvan oswa domaje yo.
• Kondisyon Sond lan: Inspect the temperature probe for any signs of damage to the cable or the sensor tip. Replace if damaged to maintain accuracy.
• Anviwònman: Ensure the module is installed in an environment within its specified operating temperature and humidity ranges to prevent premature failure.

Depanaj

If you encounter issues with your XH-W3001 module, refer to the following common problems and solutions:

Espesifikasyon

Garanti ak sipò

For warranty information or technical support regarding your UMLIFE XH-W3001 Digital LED Temperature Controller Module, please refer to the product packaging or contact UMLIFE customer service directly. Contact details are typically provided with your purchase or can be found on the manufacturer's official websit.