GoPro Protective Lens Replacement for HERO7 Black - Instruction Manual

Pwodwi souview

This protective lens replacement is designed to shield the interior lens of your GoPro HERO7 Black camera from dirt, dust, and scratches. It is made with Corning Gorilla Glass for exceptional strength and features a flat design to prevent distortion during underwater use.

Karakteristik kle:

• Shields the interior lens of your HERO7 Black from dirt, dust, and scratches.
• Easy to remove and replace without the need for specialized tools.
• Constructed with Corning Gorilla Glass for enhanced durability.
• Flat lens design minimizes distortion when shooting underwater.

Image: The GoPro Protective Lens Replacement, showcasing its square frame and clear glass center.

Kontni pake

Pake a gen atik sa yo:

• 1 x Protective Lens Replacement for HERO7 Black (Model AACOV-003)

Enstriksyon Enstalasyon

Follow these steps to replace the protective lens on your GoPro HERO7 Black camera.

Removing the Old Lens:

1. Grip the Lens: Firmly grip the existing protective lens with your thumb and index finger.
2. Twist and Pull: Apply upward pressure while twisting the lens counter-clockwise. The lens is designed to be airtight and waterproof, so some force may be required to disengage the seal.
3. Assisted Removal (if needed): If the lens is difficult to remove, carefully slide a thin, non-abrasive object (like a credit card edge) between the lens housing and the camera body. This can help release the mechanism and make twisting easier.
4. Retire: Once disengaged, carefully lift the old lens away from the camera.

Installing the New Lens:

1. Align the New Lens: Position the new protective lens over the camera's internal lens, ensuring the tabs on the lens align with the slots on the camera body.
2. Press and Twist: Gently press the new lens into place and twist it clockwise until it clicks securely. Ensure it is fully seated and flush with the camera body to maintain its waterproof seal.
3. Verifye sele a: After installation, visually inspect the lens to confirm it is properly seated and there are no gaps, which could compromise the camera's water resistance.

Image: Close-up of the GoPro Protective Lens Replacement, showing the mounting points and the lens itself.

Gid pou Itilizasyon

Once installed, the protective lens operates automatically, shielding your camera's internal lens. No specific operational steps are required for the lens itself.

Enpòtan: Always ensure the protective lens is correctly installed and securely fastened before using your GoPro HERO7 Black in wet or dusty environments to maintain its waterproof and protective capabilities.

Swen ak Antretyen

To ensure the longevity and optical clarity of your protective lens, follow these maintenance tips:

• Netwayaj: Use a soft, lint-free cloth, preferably a microfiber cloth, to gently wipe the lens. For stubborn smudges or dirt, slightly dampRense twal la avèk dlo oswa yon solisyon pou netwaye lantiy. Evite materyèl abrazif oswa pwodui chimik ki agresif.
• Depo: When not in use, store the lens in a clean, dry place, ideally in a protective pouch, to prevent scratches and dust accumulation.
• Enspeksyon: Regularly inspect the lens for any signs of damage, scratches, or wear. Replace the lens if its clarity is compromised or if the seal appears damaged.

Depanaj

Blurry Images or Video:

If your photos or videos appear blurry after installing the protective lens, consider the following:

• Enstalasyon ki pa kòrèk: Ensure the lens is fully seated and twisted clockwise until secure. A loose or improperly installed lens can affect image quality and water resistance.
• Pwòpte Lantiy: Check for smudges, fingerprints, or dirt on both the protective lens and the camera's internal lens. Clean both surfaces thoroughly.
• Lens Damage: Inspect the protective lens for any scratches, cracks, or manufacturing defects. If the lens itself is damaged, it may need to be replaced.

Difficulty Removing/Installing Lens:

The lens is designed for a tight, waterproof seal. If you encounter difficulty:

• Apply Firm, Even Pressure: When twisting, ensure you are applying firm, consistent pressure.
• Use a Credit Card: As mentioned in installation, a thin, non-abrasive tool can help release the seal.

Espesifikasyon

Enfòmasyon sou Garanti

GoPro products and accessories are guaranteed against manufacturing defects for one (1) year from the original date of purchase. GoPro's sole obligation during this period is to repair or replace the defective part or product at its discretion. This warranty does not cover damage resulting from use, accident, or normal wear and tear. GoPro assumes no liability for any accident, injury, death, loss, or other claim related to or resulting from the use of this product. Due to potential user resealing errors, this product is not warranted against waterhousing leakage or any resulting damage. Please review and follow all instructions carefully when sealing waterhousings. Returns or replacements may be subject to shipping, handling, replacement, and/or restocking fees.

Sipò pou Kliyan

For further assistance, technical support, or warranty claims, please visit the official GoPro support websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou a pou validasyon garanti a.

Official GoPro Websit: gopro.com/help