Manyèl Enstriksyon pou Sipò Miray Televizyon Inivèsèl RICOO R06-F

1. Entwodiksyon

This manual provides detailed instructions for the safe and proper installation and operation of your RICOO R06-F Universal Full-Motion TV Wall Mount. Please read all instructions carefully before beginning installation. Retain this manual for future reference.

2. Enfòmasyon sou Sekirite

AVÈTISMAN:

Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you have any questions, please contact RICOO customer support.

• Ensure the wall structure can safely support the combined weight of the mount and your television.
• This mount is designed for installation on solid concrete walls using the included Fischer dowels/plugs. Do not install on drywall or stud walls without proper reinforcement or alternative mounting hardware (not included).
• Do not exceed the maximum weight capacity: 209 lbs (95 kg) for VESA up to 400x400, and 121 lbs (55 kg) for VESA greater than 400x400.
• Always use appropriate safety equipment during installation, including eye protection and gloves.
• Installation requires at least two people.
• Verify all connections are secure before releasingade televizyon an.

3. Pake kontni

Verify that all components are present and undamaged before installation. If any parts are missing or damaged, do not proceed with installation and contact customer service.

Figi 1: Plis paseview of the RICOO R06-F TV wall mount components, including the main bracket assembly and Fischer dowels for concrete wall installation.

Pake a anjeneral gen ladan:

• Asanble Plak Miray la
• Bra Sipò Televizyon (x2)
• Mounting Hardware (screws, washers, spacers for TV attachment)
• Fischer Dowels/Plugs (for solid concrete walls)
• Manyèl Enstriksyon

4. Enstalasyon ak Enstalasyon

Follow these steps carefully to ensure a secure and correct installation.

4.1 Chèk Pre-Enstalasyon

1. Verifye konpatibilite televizyon an: Ensure your TV's screen size is between 40 and 75 inches and its VESA mounting pattern is within 300x200 to 600x400.
2. Tcheke pwa televizyon an: Confirm your TV's weight does not exceed 209 lbs (95 kg) for VESA up to 400x400, or 121 lbs (55 kg) for VESA greater than 400x400.
3. Kalite miray: This mount is specifically designed for solid concrete walls using the provided Fischer dowels. Do not install on drywall or stud walls without consulting a professional or using appropriate alternative hardware.
4. Zouti obligatwa (pa enkli): Drill, stud finder (if applicable), level, measuring tape, pencil, screwdriver, socket wrench.

4.2 Attaching TV Brackets to the TV

1. Mete televizyon ou a fas anba sou yon sifas mou epi pwòp pou evite domaje ekran an.
2. Idantifye twou VESA aliye yo sou do a nan televizyon ou.
3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's mounting holes.
4. Attach the two vertical TV bracket arms to the back of your TV. Ensure they are centered and securely fastened, but do not overtighten.

4.3 Mounting the Wall Plate to the Wall

1. Determine the desired height and position for your TV. Use a pencil to mark the top center of where the TV will be.
2. Hold the wall plate assembly against the wall at the desired location. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
3. Drill pilot holes at the marked locations. For solid concrete walls, use a masonry drill bit of the appropriate size for the Fischer dowels.
4. Insert the Fischer dowels into the drilled holes until they are flush with the wall surface.
5. Align the wall plate with the dowels and secure it to the wall using the provided lag bolts and washers. Tighten all bolts firmly to ensure the wall plate is securely anchored.

Figi 2: The RICOO R06-F mount securely installed on a wall, with a TV attached, showcasing its ability to extend and swivel.

4.4 Hanging the TV on the Wall Plate

1. With assistance, carefully lift the TV (with the attached brackets) and hook the TV brackets onto the wall plate.
2. Ensure both TV brackets are properly seated and engaged with the wall plate.
3. Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodgement.

5. Operating and Adjusting the Mount

The RICOO R06-F mount offers various adjustments for optimal viewing.

Figi 3: Visual representation of the mount's adjustable features, including swivel, tilt, wall distance, and screen rotation.

• Swivel/Pivoting: The mount allows for up to 120 degrees of swivel (60 degrees left, 60 degrees right) if the display width is a maximum of 80cm. Gently push or pull the TV to the desired angle.
• Panche: The TV can be tilted +/-15 degrees (15 degrees up, 15 degrees down). Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs to secure the position.
• Wotasyon: The front plate allows for a rotation of +/-6 degrees. This feature is useful for fine-tuning the horizontal alignment of the TV after installation. Adjust as needed and secure.
• Distans mi: The mount allows for a variable wall distance from 115mm (retracted) to 545mm (extended). Extend or retract the arms to achieve the desired distance from the wall.

6. Antretyen

Antretyen regilye asire lonjevite ak fonksyònman an sekirite nan sipò miray televizyon ou an.

• Netwayaj: Siye montaj la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan.
• Tèks Peryodik: Every few months, check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
• Lubrifikasyon: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact customer support.

NAN. Depanaj

Si ou rankontre pwoblèm, gade solisyon komen sa yo.

• Televizyon an pa nivo: Use the +/-6 degree rotation feature to adjust the horizontal alignment. Ensure all mounting screws are tightened evenly.
• Mòn nan santi l lach: Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall structure is sound.
• Difficulty adjusting tilt/swivel: Ensure no cables are obstructing movement. For tilt, loosen the adjustment knobs, reposition, and re-tighten.
• Televizyon an pa anfòm ak sipò a: Verify your TV's VESA pattern and weight against the specifications in this manual. If incompatible, do not attempt to force installation.

8. Espesifikasyon

Figi 4: Detailed technical drawing illustrating the dimensions and adjustable ranges of the RICOO R06-F mount.

Figi 5: Illustration of the dual-arm design and corresponding weight capacities based on VESA mounting patterns.

Figi 6: Visual guide to the compatible screen sizes and VESA mounting patterns for the RICOO R06-F TV wall mount. Note: The product specifications state compatibility for 40-75 inch TVs and VESA 300x200 to 600x400.

9. Sipò pou Kliyan

For technical assistance, missing parts, or warranty inquiries, please contact RICOO customer support through their official websit oswa revandè kote yo te achte pwodwi a.