Yuwell YE680A YE690A Digital Arm Blood Pressure Monitor User Manual

1. Entwodiksyon

This manual provides essential instructions for the safe and effective operation of your Yuwell YE680A/YE690A Digital Arm Blood Pressure Monitor. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed for non-invasive measurement of systolic and diastolic blood pressure and pulse rate in adults using the oscillometric method.

2. Enfòmasyon sou Sekirite

Garanti enpòtan:

• Konsilte doktè w anvan w itilize aparèy sa a si w gen nenpòt pwoblèm medikal.
• Pa sèvi ak aparèy sa a sou tibebe, timoun, oswa moun ki pa kapab bay konsantman.
• Avoid self-diagnosis and self-treatment based on measurement results. Always consult a healthcare professional.
• Pa sèvi ak aparèy la nan yon machin k ap deplase oswa nan yon avyon.
• Keep the device and cuff away from water and moisture.
• Use only authorized accessories and parts.

3. Pwodwi konpozan

The Yuwell YE680A/YE690A Blood Pressure Monitor package includes the following items:

• Digital Blood Pressure Monitor Unit
• Manchèt pou granmoun
• DC pouvwa adaptè
• Manyèl Enstriksyon (dokiman sa a)

Nòt: Please check all components upon opening the package. Contact your retailer if any items are missing or damaged.

4. Aparèy souview

Familiarize yourself with the main parts of your blood pressure monitor.

Figi 1: Devan view of the Yuwell YE680A/YE690A Digital Arm Blood Pressure Monitor. This image shows the large backlit display, control buttons, and the port for the arm cuff.

4.1. Montre Endikatè

• Presyon sistolik: Top large number.
• Presyon dyastolik: Middle large number.
• Batman kè Bottom number, usually with a heart icon.
• Endikatè batman kè iregilye: Symbol appears if an irregular heartbeat is detected.
• Gid pou vlope manchèt: Indicates if the cuff is applied correctly.
• Endikatè batri: Montre dire lavi batri ki rete a.
• User Memory Indicator: Displays which user's memory is active (User 1 or User 2).

4.2. Bouton

• Bouton START/STOP: Powers the unit on/off and starts/stops a measurement.
• MEM (Memory) Button: Recalls stored measurement results.
• SET bouton: Used for setting date, time, and user selection.
• User 1/User 2 Selection Switch/Button: Selects between two user profiles.

5. Enstalasyon

5.1. Pwovizyon pou pouvwa

The monitor can be powered by batteries or the included DC power adapter.

5.1.1. Enstalasyon batri

Open the battery compartment cover on the back of the unit. Insert four "AA" alkaline batteries, ensuring correct polarity (+/-). Close the cover securely.

5.1.2. Sèvi ak adaptè AC la

Insert the adapter plug into the DC input jack on the side of the monitor. Plug the adapter into a standard electrical outlet. When using the AC adapter, batteries are not required but can remain in the unit as a backup.

5.2. Mete Dat ak Lè

Peze a SET button to enter setting mode. Use the MEM button to adjust values (year, month, day, hour, minute) and the SET button to confirm each setting and move to the next. The monitor will automatically exit setting mode after a period of inactivity or after all settings are confirmed.

5.3. Konekte braslè a

Insert the air plug of the arm cuff firmly into the air jack on the left side of the monitor unit.

6. Operasyon Enstriksyon

6.1. Anvan Mezi a

• Evite manje, bwè alkòl, fimen, fè egzèsis, ak benyen pou 30 minit anvan mezi.
• Repoze pou omwen 5 minit anvan ou pran yon mezi.
• Chita nan yon pozisyon konfòtab ak do ou sipòte ak pye plat sou planche a.
• Mete bra ou sou yon sifas plat pou braslè a nan nivo kè a.
• Ensure the cuff is applied directly to bare skin, not over clothing.

6.2. Aplike manchèt bra a

Wrap the cuff around your upper arm, approximately 1-2 cm above the elbow joint. The air tube should run down the center of your arm in line with your middle finger. Ensure the cuff is snug but not too tight; you should be able to insert two fingers between the cuff and your arm. The artery mark on the cuff should be positioned over your brachial artery.

6.3. Pran yon mezi

1. Select the desired user (User 1 or User 2) using the User Selection button.
2. Peze a KÒMANSE/KANPE bouton. Braslè a ap gonfle otomatikman.
3. Rete trankil epi an silans pandan mezi a.
4. Yon fwa mezi a fini, braslè a ap degonfle, epi tansyon sistolik ou, tansyon dyastolik ou, ak batman kè ou ap parèt sou ekran an.
5. Rezilta a ap anrejistre otomatikman nan memwa itilizatè ki chwazi a.
6. Peze a KÒMANSE/KANPE button again to turn off the unit, or it will automatically power off after 1 minute of inactivity.

6.4. Recalling Memory Readings

Avèk inite a koupe, peze la MEM button. The monitor will display the average of the last three readings, then cycle through individual stored readings from most recent to oldest. Press MEM repete pou view all stored data. Each user has 74 memory slots.

6.5. Clearing Memory

To clear all readings for a specific user, enter memory recall mode for that user. While viewing a reading, press and hold the SET button for approximately 3 seconds until "DEL" or "CLR" appears, indicating memory has been cleared.

7. Antretyen ak Depo

7.1. Netwayaj

Wipe the monitor unit and cuff with a soft, dry cloth. If necessary, use a slightly damp cloth with mild soap, then wipe dry. Do not use abrasive cleaners or immerse the unit in water.

7.2. Depo

• Sere aparèy la nan yon kote ki pwòp epi sèk, lwen limyè solèy dirèk, tanperati ekstrèm ak imidite.
• Si w pa pral itilize aparèy la pou yon bon bout tan, retire pil yo pou anpeche likid koule.
• Do not fold the cuff tightly or twist the air tube excessively.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

For warranty information and customer support, please refer to the warranty card included with your product or contact your local Yuwell distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Manifakti: Jiangsu Yuyue ekipman medikal & ekipman co, Ltd.