1. Entwodiksyon
Thank you for choosing the Ascher Ultra Bright USB Rechargeable Bike Light Set. This manual provides essential information for the proper setup, operation, and maintenance of your new bike lights. Designed for enhanced visibility and safety, this set includes a powerful front headlight and a bright rear taillight, both conveniently USB rechargeable.
Image: The Ascher Ultra Bright USB Rechargeable Bike Light Set, featuring the black headlight and red taillight.
2. Pwodwi Features
- USB Rechargeable: Both the headlight and taillight are equipped with built-in rechargeable lithium batteries (2000 mAh for headlight, 330 mAh for taillight), eliminating the need for disposable batteries.
- Four Light Mode Options: A single-touch switch allows selection from four distinct lighting modes: full brightness, half brightness, slow flashing, and fast flashing.
- Konsepsyon avanse: Lightweight and compact, these lights are rated IPX4 waterproof, providing protection against splashes from any direction. The headlight features a low battery indicator that turns red when power is low.
- Enstalasyon fasil: The headlight comes with a mounting bracket for easy handlebar attachment. The taillight uses a silicone strap with four openings for secure fitting on most seat posts. Both lights can be easily attached and removed without tools.
- Multifonksyonalite: Beyond cycling, this light set can serve as an emergency flashlight for hiking, camping, or other outdoor activities, enhancing visibility and safety in low-light conditions.
Image: Visual representation of the bike light's key features including rechargeable battery capacity and multiple light modes.
3. Pake kontni
- 1 x Ascher USB Rechargeable Headlight
- 1 x Ascher USB Rechargeable Taillight
- 1 x Headlight Mounting Bracket
- 1 x Taillight Silicone Mount Strap
- 2 x USB Charging Cables (Micro-USB)
- 1 x Manyèl Itilizatè (dokiman sa a)
Image: Contents of the Ascher bike light set package, including headlight, taillight, mounting accessories, and USB cables.
4. Enstalasyon ak Enstalasyon
Enstalasyon limyè devan:
- Secure the mounting bracket to your bicycle's handlebar. Ensure it is tight and stable.
- Slide the headlight onto the bracket until it clicks securely into place.
- To remove, press the quick-release clip on the bracket and slide the light off.
Enstalasyon limyè dèyè:
- Wrap the silicone mount strap around your bicycle's seat post.
- Hook the strap into one of the four openings to secure the taillight.
- The taillight can be mounted vertically or horizontally based on your preference.
- To remove, press the quick-release clip and slide the light off the strap.
Image: Step-by-step guide illustrating the easy, tool-free installation of both the headlight and taillight on a bicycle.
5. Operasyon ak Itilizasyon
Both the headlight and taillight operate with a simple one-touch switch.
Chanje mòd limyè:
- Press the power button once to cycle through the available modes: Full Brightness, Half Brightness, Slow Flashing, Fast Flashing.
- Press and hold the power button for approximately 2 seconds to turn the light off.
Image: Illustration of the four different light modes available for the Ascher bike lights: Full Brightness, Half Brightness, Fast Flashing, and Slow Flashing.
6. Chaje Enstriksyon
The Ascher bike lights are USB rechargeable for convenience.
- Locate the Micro-USB charging port on each light. This is typically covered by a rubber flap to ensure water resistance.
- Connect the provided USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- The headlight's indicator will turn red when the battery power is too low, signaling a need for charging. During charging, the indicator light will typically show charging status (e.g., red for charging, green for fully charged).
- Yon fwa li chaje nèt, dekonekte kab la epi asire w ke ti pòt kawotchou a byen fèmen pou kenbe rezistans dlo a.
Image: The Ascher bike lights connected to a power bank via Micro-USB cables for recharging.
7. Antretyen
- Netwayaj: Siye limyè yo ak yon twal mou,amp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Depo: Sere limyè yo nan yon kote ki fre epi sèk lè w pa ap itilize yo. Evite tanperati ekstrèm.
- Swen batri: For optimal battery life, avoid completely draining the battery frequently. Recharge regularly.
- Rezistans dlo: Although IPX4 rated, avoid submerging the lights in water. Ensure the USB port cover is always sealed when not charging.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Batri a fin dechaje. | Recharge the light using the provided USB cable. |
| Limyè a ap tranble oubyen li fèb. | Batri ki ba oswa koneksyon ki lach. | Recharge the light. Ensure the light is securely attached to its mount. |
| Light falls off during riding. | Improper installation or worn bracket. | Ensure the light clicks securely into the bracket. If the bracket is damaged, contact customer support for replacement. |
| Endikatè chaj la pa fonksyone. | Kab oswa sous kouran ki defektye. | Eseye yon lòt kab USB oswa sous pouvwa. |
9. Espesifikasyon
- Modèl: HJ-040
- Koulè: Nwa
- Materyèl: Aliminyòm, silikon, plastik
- Sous pouvwa: USB Rechargeable Battery Powered
- Headlight Battery: 2000 mAh Lityòm
- Taillight Battery: 330 mAh Lityòm
- Brightness (Headlight): 300 Lumen
- Mòd limyè: 4 (Full Brightness, Half Brightness, Slow Flashing, Fast Flashing)
- Nivo rezistans dlo: IPX4 (rezistan dlo)
- Kalite montaj: Handlebar Mount (Headlight), Seat Mount (Taillight)
10. Garanti ak sipò
Ascher is committed to bringing consumers high-quality, high-value products and excellent after-sales service. We cherish every customer, and your satisfaction is our priority. Any problems, please contact us for a solution, we will help ASAP.
For support, please refer to the contact information provided with your product packaging or visit the official Ascher store on Amazon: Ascher Store