Aqualine POOLTOOL 132
Aqualine Pool Light Wedge Part 132 Instruction Manual
Mak: Aqualine
Modèl: POOLTOOL 132
Entwodiksyon
This manual provides instructions for the Aqualine Pool Light Wedge Part 132, designed to secure pool lights when the light niche tab is stripped or broken. This product is made in the USA and is corrosion resistant, offering a reliable solution for maintaining your pool lighting.
Enfòmasyon enpòtan sou sekirite
- Always ensure power to the pool light circuit is OFF anvan enstalasyon oswa antretyen.
- All electrical work should be performed by a licensed electrician and the light circuit must be GFCI protected.
- Do not attempt to install or remove the wedge while the pool light is submerged or powered.
- Use appropriate personal protective equipment during installation.
Kontni pake
The Aqualine Pool Light Wedge Part 132 package includes:
- 1x Aqualine Pool Light Wedge Part 132 (black plastic wedge with screw)
Enstalasyon ak Enstalasyon
Preparasyon pou enstalasyon
The Aqualine Pool Light Wedge Part 132 is designed for easy installation to securely hold your pool light in place, especially when the original mounting tab is damaged.
Etap-pa-etap Enstalasyon
- Etenn pouvwa: Ensure the power to your pool light is completely disconnected at the circuit breaker.
- Remove Existing Light (if applicable): Carefully remove the existing pool light fixture from its niche.
- Position the Wedge: Insert the screw through the screw hole of your pool light fixture. Place the black plastic wedge onto the screw, ensuring the curved side faces the light. Do not tighten fully yet.
- Insert Light into Niche: Carefully guide the pool light fixture back into its niche. The wedge should be positioned to fit between the metal bars or the existing partially broken screw hole, acting as an anchor.
- Sekirize limyè a: Apply gentle pressure to keep the plastic wedge in place against the light fixture. Slowly tighten the screw until the light is securely fastened within the niche. Ensure a snug fit to prevent movement.
- Verifye estabilite: Once tightened, gently test the light fixture to ensure it is firmly in place and does not wobble.
- Retabli pouvwa: Once installation is complete and verified, restore power to the pool light circuit.

Figure 1: Aqualine Pool Light Wedge Part 132 components, showing the black plastic wedge and a long metal screw.

Figure 2: Aqualine Pool Light Wedge and screw shown separately.

Figure 3: Aqualine Pool Light Wedge held between fingers, showing its side profile.

Figure 4: Aqualine Pool Light Wedge held between fingers, showing its top view.

Figure 5: Aqualine Pool Light Wedge assembled with the screw, ready for installation.

Figure 6: Diagram illustrating the typical installation steps for the Pool Light Wedge. It also includes a warning about licensed electricians and GFCI protection.
Videyo Enstalasyon Ofisyèl la
Video 1: This video demonstrates the installation process for the Swimming Pool Light Wedge Part #132, showing how to secure it within a pool light niche.
Enstriksyon Operasyon
The Aqualine Pool Light Wedge Part 132 is a passive component designed to provide a secure mounting point for pool lights. Once installed, its function is to hold the light firmly in place. There are no operational controls for the wedge itself. The operation of your pool light (on/off, color changes, etc.) will depend on your specific pool light model and its control system.
Antretyen
Swen ak Antretyen
- Enspeksyon regilye: Periodically inspect the wedge and the pool light fixture for any signs of wear, damage, or loosening.
- Netwayaj: If necessary, gently clean the wedge with a soft brush and mild pool-safe cleaner. Avoid abrasive materials that could damage the plastic.
- Verifikasyon sere: Ensure the screw remains tight to maintain a secure fit for the pool light. Re-tighten if any looseness is detected.
- Rezistans korozyon: The wedge is made from corrosion-resistant material, but regular pool chemical balancing is recommended to prolong the life of all pool components.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pool light is loose after installation. | Screw not tightened sufficiently; wedge not properly seated. | Turn off power, re-seat the wedge, and tighten the screw firmly. |
| Difficulty inserting the light with the wedge. | Improper positioning of the wedge or light. | Ensure the curved side of the wedge is against the light and it aligns with the niche's retaining features. |
| Water leaking around the light fixture. | Not directly related to the wedge, but indicates a seal issue with the light fixture itself. | Consult your pool light's manual or a professional for sealing the light fixture. |
Espesifikasyon
- Mak: Aqualine
- Modèl: POOLTOOL 132
- Materyèl: Plastik
- Koulè: Blan
- Dimansyon pwodwi: 3"L x 1"L x 1"H
- Pwa atik: 1.3 ons
- Karakteristik espesyal: Light Wedge, Corrosion Resistant
- Itilizasyon Rekòmande: Repairing and holding pool lights in swimming pools
- UPC: 601579499426
Garanti ak sipò
The Aqualine Pool Light Wedge Part 132 comes with a 30-Day Money Back Guarantee. For further support or warranty claims, please contact Aqualine customer service directly.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.