be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case User Manual

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your product.

The Dark Base PRO 900 Rev. 2 is designed for high-end systems and offers exceptional flexibility, silent operation, and advanced cooling capabilities. Its modular design allows for various configurations to suit your specific needs.

Enfòmasyon sou Sekirite

• Toujou dekonekte ekipman pou kouran an nan priz miray la anvan ou enstale oswa retire nenpòt konpozan.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Kenbe ti pyès ak materyèl anbalaj lwen timoun yo.
• Do not attempt to open or repair the case or its components yourself. Refer to qualified service personnel.
• Ensure proper ventilation around the PC case to prevent overheating.

Kontni pake

Verifye ke tout konpozan ki nan lis anba a yo prezan nan pake ou a:

• be quiet! Dark Base PRO 900 Rev. 2 PC Case
• Accessory box with screws, cable ties, and other mounting hardware
• Manyèl itilizatè
• RGB LED strips (pre-installed or included separately)
• Additional fan mounting brackets (if applicable)

Enstalasyon

1. Prepare Ka a

Place the case on a stable, flat surface. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward. The tempered glass side panel should be handled with extreme care.

Imaj: Enteryè view of the Dark Base PRO 900 Rev. 2, illustrating the internal layout for component installation.

2. Enstalasyon mèr

The motherboard tray is removable and can be inverted for an inverse layout. To remove, unscrew the mounting screws and slide the tray out. Install your ATX, E-ATX, or XL-ATX motherboard onto the tray using the provided standoffs and screws. Ensure the I/O shield is installed in the case before re-inserting the motherboard tray.

3. Enstalasyon Inite Alimantasyon (PSU)

Install the PSU from the rear of the case. Secure it with the provided screws. Ensure all necessary cables are routed through the designated cutouts for efficient cable management.

4. Drive Installation (HDD/SSD)

The case features modular HDD slots. Each HDD cage can be repositioned or removed. Install 3.5-inch HDDs into the drive cages using the anti-vibration grommets and screws. 2.5-inch SSDs can be mounted directly onto the HDD trays or dedicated SSD mounts behind the motherboard tray.

5. Graphics Card and Expansion Cards

Remove the necessary PCIe slot covers. Insert your graphics card and other expansion cards into the motherboard's PCIe slots and secure them with screws.

6. Enstalasyon Vantilatè ak Radyatè

The case comes with three pre-installed Silent Wings 3 PWM fans. Additional fans or radiators up to 420mm can be installed in various positions (front, top, rear, bottom). Refer to the fan controller section for connecting fans.

Image: Front of the Dark Base PRO 900 Rev. 2 with the door open, showing fan mounts and dust filter access.

7. Jesyon kab

Utilize the numerous cable routing cutouts and Velcro straps behind the motherboard tray to manage cables. This improves airflow and aesthetics.

Enstriksyon Operasyon

1. Limen

After all components are installed and connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button located on the top I/O panel to start your system.

Image: Top I/O panel of the Dark Base PRO 900 Rev. 2, highlighting the power button and connectivity options.

2. Kontwòl fanatik

The case features a stepless dual-rail fan controller, switchable between Silence and Performance modes. Use the fan controller switch on the top I/O panel to adjust fan speeds according to your preference for noise or cooling performance.

3. RGB LED Illumination

The integrated RGB LED illumination can be controlled via a dedicated button on the top I/O panel or synchronized with compatible motherboard software. Cycle through various colors and lighting effects to customize your system's appearance.

Antretyen

1. Netwayaj Filtè Pousyè

The Dark Base PRO 900 Rev. 2 includes easily removable dust filters at the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case. Simply slide them out, clean with water or a soft brush, and re-insert once dry.

2. Netwayaj jeneral

Sèvi ak yon mou, damp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

Depanaj

• Sistèm nan pa limen:
  • Ensure the PSU is properly connected to the wall outlet and switched on.
  • Tcheke tout koneksyon pouvwa yo ak kat manman an ak konpozan yo.
  • Verifye ke kab bouton pouvwa ki sou panèl devan an byen konekte ak kat manman an.
• Vantilatè yo pa vire:
  • Check fan connections to the fan controller or motherboard headers.
  • Ensure the fan controller is set to an appropriate speed mode (not off, if applicable).
• RGB LEDs Not Working:
  • Verify RGB strip connections to the case's RGB controller or motherboard.
  • If using motherboard software, ensure it is installed and configured correctly.
• Twòp bri:
  • Check if fan speeds are set too high; adjust using the fan controller.
  • Ensure all screws are tightened to prevent vibrations.
  • Clean dust filters and fans to remove obstructions.

Espesifikasyon

Garanti ak sipò

Enfòmasyon sou Garanti

Pwodwi sa a kouvri pa yon Garanti manifakti 3 zan from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.

Sipò pou Kliyan

For technical assistance, troubleshooting, or warranty inquiries, please visit the official be quiet! websit la oubyen kontakte sèvis kliyan yo dirèkteman.

Ofisyèl Websit: www.bequiet.com