Emtek 7103 Pasaj Set Enstriksyon Manyèl

Pwodwi souview

The Emtek 7103 Passage Set is a high-quality knobset designed for doors that do not require a locking mechanism, such as closet doors, hallway doors, or pantry doors. This set includes a Madison Black Knob and a #3 Wrought Steel Rosette with a Flat Black Steel (FBS) finish. It is manufactured by Emtek and includes a standard rotation latch and strike plate. The knobset is designed for a standard 2-1/8 inch door preparation. The standard latch is for a 2-3/8 inch backset, with a 2-3/4 inch backset available if specified.

This image displays the Emtek 7103 Passage Set, featuring a round Madison Black Knob mounted on a rectangular Flat Black Wrought Steel Rosette. The knob has a smooth, glossy black finish, contrasting with the textured matte black finish of the rosette.

Enstalasyon ak Enstalasyon

This section provides instructions for the proper setup and installation of your Emtek 7103 Passage Set.

Anvan w kòmanse

• Ensure all components are present: knobset, rosette, latch, strike plate, and mounting screws.
• Verify door thickness and backset requirements. Standard backset is 2-3/8 inches. If 2-3/4 inches is required, ensure you have the correct latch.
• Tools required: Phillips head screwdriver, tape measure, pencil.

Etap enstalasyon yo

1. Prepare pòt la: Ensure the door has a standard 2-1/8 inch bore hole for the knobset and a 1-inch bore hole for the latch.
2. Enstale Latch la: Insert the latch into the edge of the door, ensuring the bevel faces the door frame. Secure with screws.
3. Install the Exterior Knob/Rosette: Place the exterior knob and rosette assembly through the 2-1/8 inch bore hole, aligning the spindle with the latch mechanism.
4. Install the Interior Knob/Rosette: Place the interior knob and rosette assembly onto the spindle, aligning the mounting posts with the holes on the exterior rosette.
5. Sekirize Asanble a: Insert and tighten the mounting screws through the interior rosette into the exterior rosette. Do not overtighten.
6. Enstale plak grèv la: Mark and chisel the door frame for the strike plate. Secure the strike plate with screws, ensuring the latch engages smoothly.
7. Operasyon tès: Rotate the knobs to ensure the latch retracts and extends freely. Check for smooth operation from both sides of the door.

Enstriksyon Operasyon

The Emtek 7103 Passage Set is designed for doors that do not require locking, such as closet doors, hallway doors, or pantry doors. It allows for free passage from both sides at all times.

• To open the door, simply turn the knob in either direction. The latch bolt will retract, allowing the door to open.
• To close the door, push the door shut. The latch bolt will automatically engage with the strike plate, holding the door closed.

Antretyen

Proper maintenance will ensure the longevity and smooth operation of your Emtek 7103 Passage Set.

• Netwayaj: Clean the knob and rosette surfaces with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishes that may damage the finish.
• Lubrifikasyon: Periodically apply a small amount of silicone-based lubricant to the latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dust and grime.
• Sere vis: Over time, mounting screws may loosen. Periodically check and gently tighten any loose screws to maintain stability. Do not overtighten.
• Enspeksyon: Regularly inspect the knobset for any signs of wear, damage, or misalignment.

Depanaj

Espesifikasyon

• Modèl: Emtek 7103 Passage Set
• Materyèl: Wrought Steel
• Style bouton: Madison Black Knob
• Rosette Style: #3 Rosette
• Fini: Flat Black Steel (FBS)
• Preparasyon pòt: Standard 2-1/8" bore hole
• Backset: Standard 2-3/8" (2-3/4" available upon request)
• UPC: 751125555226

Garanti ak sipò

Emtek products are manufactured to high-quality standards. For specific warranty information regarding your Emtek 7103 Passage Set, please refer to the documentation provided with your purchase or visit the official Emtek websit. Tèm ak kondisyon garanti yo ka varye.

For technical support, product inquiries, or assistance with installation or troubleshooting, please contact Emtek customer service directly. Their contact information can typically be found on their official websit la oubyen nan anbalaj pwodwi a.

Manifakti: Emtek

Ofisyèl Websit: www.emtek.com