Moxa IM-6700A-8PoE

MOXA IM-6700A-8PoE Fast Ethernet Interface Module User Manual

Model: IM-6700A-8PoE

1. Entwodiksyon

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA IM-6700A-8PoE Fast Ethernet Interface Module. This module is designed for use with IKS-6726A/6728A modular Ethernet switches, offering 8 x 10/100BaseTX PoE/PoE+ ports.

2. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou enstale oswa itilize aparèy la. Si ou pa fè sa, ou ka blese oswa domaje ekipman an.

  • Asire bon baz pou anpeche chòk elektrik.
  • Pa ekspoze aparèy la nan dlo oswa imidite twòp.
  • Opere aparèy la nan limit tanperati ak imidite ki espesifye yo.
  • Se sèlman pèsonèl kalifye ki ta dwe fè enstalasyon ak antretyen.
  • Disconnect power before cleaning or servicing the module.

3. Pake kontni

Verifye ke pake ou a gen atik sa yo:

  • MOXA IM-6700A-8PoE Fast Ethernet Interface Module
  • Gid Enstalasyon Rapid (si sa aplikab)
  • Kat Garanti (si sa aplikab)

Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte vandè ou imedyatman.

4. Enstalasyon

4.1 Enstalasyon Fizik

  1. Ensure the host IKS-6726A/6728A modular Ethernet switch is powered off and disconnected from all power sources.
  2. Locate an available module slot on the host switch.
  3. Carefully align the IM-6700A-8PoE module with the slot and gently slide it in until it is fully seated.
  4. Secure the module using any provided screws or locking mechanisms on the host switch.

4.2 Konekte kab rezo yo

Connect standard Ethernet cables (Cat5e or better) from your network devices to the 10/100BaseTX ports on the IM-6700A-8PoE module. For PoE/PoE+ functionality, ensure connected devices are PoE-compatible.

4.3 Limen

After all connections are secure, reconnect the host switch to its power source and power it on. The module will initialize with the switch.

5. Opere

5.1 Endikatè ki ap dirije

The module features LED indicators to provide status information:

  • LED Lyen/Aksyon (pa pò):
    • Vèt (solid): Lyen etabli.
    • Vèt (kliyote): Aktivite done.
    • Off: Pa gen lyen.
  • LED PoE (pa pò):
    • Amber (Solid): PoE power being supplied to the connected device.
    • Off: No PoE power being supplied.

5.2 PoE/PoE+ Functionality

The IM-6700A-8PoE module automatically detects and provides power to IEEE 802.3af (PoE) and 802.3at (PoE+) compliant Powered Devices (PDs) connected to its ports. The maximum power output per port and total power budget are determined by the host switch and module specifications.

6. Antretyen

6.1 Netwayaj

To clean the module, first disconnect power from the host switch. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.

6.2 Mizajou Firmware

Firmware updates for the host switch, which may include updates for the module, are typically managed through the host switch's management interface. Refer to the host switch's manual for detailed instructions on firmware updates.

6.3 Konsiderasyon Anviwònman

Ensure the operating environment remains within the specified temperature and humidity ranges to ensure optimal performance and longevity of the module.

NAN. Depanaj

Seksyon sa a bay solisyon pou pwoblèm komen ou ka rankontre.

  • No Link LED:
    • Check the Ethernet cable connection at both ends.
    • Verifye ke aparèy ki konekte a limen epi li fonksyone byen.
    • Eseye yon lòt kab Ethernet oswa yon lòt pò.
  • PoE LED Off (for a PoE device):
    • Ensure the connected device is a PoE/PoE+ compliant Powered Device (PD).
    • Check the power budget of the host switch; it might be exceeded.
    • Verify the cable length does not exceed the maximum for PoE (typically 100 meters).
  • Module Not Detected by Host Switch:
    • Ensure the module is fully seated in its slot.
    • Power cycle the host switch.
    • Consult the host switch's manual for module detection procedures.

Si pwoblèm nan kontinye, kontakte sipò teknik.

8. Espesifikasyon

KarakteristikDeskripsyon
MakMoxa
ModèlIM-6700A-8PoE
Kantite pò8
Kalite entèfasPoE/PoE+ (10/100BaseTX)
KonpatibiliteIKS-6726A/6728A Modular Ethernet switches
ManifaktiMOXA
UPC747356312349
ASINB07CGPHHMK

9. Garanti ak sipò

9.1 Enfòmasyon sou Garanti

This MOXA product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Moxa websit la pou wè tèm ak kondisyon garanti detaye yo.

9.2 Sipò teknik

For technical assistance, product inquiries, or to report issues, please contact Moxa's customer support. Contact information can typically be found on the official Moxa website or in the documentation provided with your host switch.

© 2023 Moxa Inc. All rights reserved. Information is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.