MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch User Manual

Entwodiksyon

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch. This device is designed for industrial networking applications, offering 8 10/100/1000BaseT PoE/PoE+ ports and 4 100/1000BaseSFP slots, capable of operating in harsh environments from -40 to 75°C.

Tanpri li manyèl sa a avèk atansyon anvan ou itilize aparèy la pou asire bon fonksyonalite ak sekirite.

Kontni pake

• MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch
• Gid Enstalasyon Rapid
• Kat Garanti
• Twous montaj (si sa aplikab)

Verify all items are present and undamaged. Contact your vendor if any items are missing or damaged.

Enstalasyon

1. Enstalasyon Fizik

The EDS-G512E-8PoE-4GSFP-T switch is designed for DIN-rail or wall mounting. Ensure the installation location provides adequate ventilation and is within the specified operating temperature range (-40 to 75°C).

Figi 1: Devan view of the MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch, showing the 8 PoE ports and 4 SFP slots.

2. Koneksyon pouvwa

Connect a 48 VDC power source to the terminal block on the switch. Ensure correct polarity. The switch supports redundant power inputs for enhanced reliability. Refer to the Quick Installation Guide for detailed wiring diagrams.

• Antre Voltage: 48 VDC
• Redondans: Dual power inputs

3. Koneksyon rezo

Connect Ethernet cables to the 10/100/1000BaseT PoE/PoE+ ports for standard network devices and PoE-powered devices. Insert SFP modules into the 100/1000BaseSFP slots for fiber optic connections. Ensure SFP modules are compatible with the switch and your fiber infrastructure.

• Pò PoE: 8 x 10/100/1000BaseT (PoE/PoE+)
• Fant SFP: 4 x 100/1000BaseSFP

Opere

1. Limen

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm proper power supply.

2. Endikatè ki ap dirije

The switch features various LED indicators to display its status and port activity:

• PWR1/PWR2: Indicates power status for input 1 and 2. (Green: Power OK, Off: No Power)
• FAY: Indicates system fault. (Red: Fault detected, Off: No fault)
• MSTR/CPLR: Indicates redundant ring status.
• Port LEDs (Link/Act): Indicates link status and data activity for each port. (Green: Link established, Blinking Green: Data activity, Off: No link)
• PoE LEDs: Indicates PoE power status for PoE ports. (Green: PoE power supplied, Off: No PoE power)

3. Jesyon Rezo

The EDS-G512E-8PoE-4GSFP-T is a managed switch. It can be configured and monitored via a web-based interface, Telnet/SSH, or SNMP. Refer to the product's software manual for detailed instructions on accessing and configuring the management interface.

• Adrès IP defo: Consult the Quick Installation Guide or product documentation.
• Default non itilizatè/modpas: Consult the Quick Installation Guide or product documentation.

Antretyen

1. Netwayaj

Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.

2. Mizajou Firmware

Tcheke regilyèman manifakti a website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package carefully.

3. Konsiderasyon anviwònman

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage and ensure optimal performance.

Depanaj

1. Pa gen pouvwa

• Check power cable connections to the switch and power source.
• Verifye sous kouran an aktif epi li bay vòltaj ki kòrèk latage (48 VDC).
• Check the PWR1/PWR2 LEDs on the switch.

2. Pa gen koneksyon rezo

• Asire w ke kab Ethernet yo byen konekte ak switch la ak aparèy rezo a.
• Check the Link/Act LEDs for the respective port. A solid green indicates a link, blinking indicates activity.
• Verify network settings on connected devices.

3. PoE Device Not Powering On

• Ensure the connected device is PoE compatible.
• Check the PoE LED for the specific port. A solid green indicates PoE power is being supplied.
• Verify the total power budget of the switch is not exceeded.

4. System Fault (FAULT LED is Red)

If the FAULT LED is red, consult the product's software manual or contact technical support for advanced diagnostics.

Espesifikasyon

Garanti ak sipò

Enfòmasyon sou Garanti

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the package or visit the official Moxa websit la pou wè tèm ak kondisyon garanti detaye yo.

Sipò teknik

For technical assistance, product documentation, or software downloads, please visit the official Moxa support website. You may also contact Moxa customer service directly for further assistance.

Moxa Ofisyèl Websit: www.moxa.com