Bonacell NP-FW50 Battery and LCD Dual Charger

Bonacell NP-FW50 Battery and LCD Dual Charger Instruction Manual

For Sony Alpha and DSC-RX10 Series Digital Cameras

Entwodiksyon

Thank you for choosing the Bonacell NP-FW50 Battery and LCD Dual Charger. This product is designed to provide reliable power for your compatible Sony digital cameras. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new battery and charger system.

The Bonacell NP-FW50 batteries are 1500mAh Li-ion batteries with a voltage of 7.2V, offering a dependable power source for extended shooting times. The dual charger features an LCD display for clear charging status and multiple protection mechanisms to ensure safe and efficient charging.

Bonacell NP-FW50 Battery and Charger Compatibility List

Image: Product Compatibility. This image displays the wide compatibility of the Bonacell NP-FW50 battery and charger with various Sony Alpha and DSC-RX10 series cameras, including A7RM2, A6500, A5100, and DSC-RX10 IV models.

Enstalasyon

Kontni pake

Anvan ou kontinye, tanpri asire w ke tout konpozan yo prezan:

  • 1 x Bonacell LCD Dual Charger
  • 2 x Bonacell NP-FW50 Li-ion Batteries
  • 1 x USB Chaje Kab
Bonacell NP-FW50 Charger and Batteries

Imaj: Kontni pake a. This image shows the Bonacell LCD Dual Charger, two NP-FW50 batteries, and a USB charging cable, as typically included in the product package.

Inisyal chaje

Pou yon pèfòmans optimal, li rekòmande pou chaje pil yo nèt anvan premye itilizasyon an.

  1. Insert the NP-FW50 batteries into the charging slots of the dual charger. Ensure they are correctly oriented.
  2. Connect the USB charging cable to the charger's input port.
  3. Connect the other end of the USB cable to a compatible power source.
Charging Bonacell NP-FW50 Batteries from Multiple Devices

Image: Charging from Multiple Devices. This image illustrates the versatility of the Bonacell charger, showing it can be powered by a laptop, phone charger, power bank, or computer via its USB cable.

Enstriksyon Operasyon

Pwosesis chaje

The Bonacell LCD Dual Charger allows you to charge one or two NP-FW50 batteries simultaneously.

  1. Mete pil: Gently slide the NP-FW50 batteries into the designated slots on the charger. The charger is designed for a snug fit.
  2. Konekte pouvwa: Use the provided USB cable to connect the charger to a 5V/2A USB power source (e.g., wall adapter, power bank, computer USB port).
  3. Siveye chaje: The LCD display on the charger will illuminate, showing the charging status for each battery independently. The battery icon will animate to indicate charging progress.
  4. Endikasyon plen chaj: Once a battery is fully charged, its corresponding icon on the LCD will show a full battery symbol and stop animating.
  5. Retire pil: Disconnect the charger from the power source, then carefully remove the charged batteries.
Bonacell LCD Dual Charger with Protection Features

Image: Visible and Intelligent Charger. This image highlights the LCD display of the Bonacell dual charger, showing individual battery charge status and indicating built-in protections such as overcharge, power visualization, overheat, short circuit, and high voltage pwoteksyon.

Bonacell NP-FW50 Battery in Charger with Features

Image: Safe and Reliable Charging. This image shows a Bonacell NP-FW50 battery inserted into the charger, emphasizing features like longer shooting time, 7.2V 1500mAh energy capacity, and a battery meter for monitoring charge.

Antretyen ak Sekirite

Swen batri

  • Depo: Sere pil yo nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.
  • Netwayaj: Keep battery contacts clean using a dry cloth.
  • Pa gen efè memwa: Bonacell NP-FW50 batteries have no memory effect, allowing you to charge them at any time without fully discharging them first.

Swen Charger

  • Anviwònman: Use the charger in a dry location only. Avoid exposure to moisture or high humidity.
  • Netwayaj: Wipe the charger with a soft, dry cloth. Do not use liquid cleaners.

Avètisman Sekirite

Failure to follow these safety guidelines may result in fire, electric shock, or injury.

  • Pa demonte: Do not attempt to disassemble the battery or charger. There are no user-serviceable parts inside. Refer service to qualified service agent.
  • Do Not Dispose in Fire: Pil ka eksploze si jete nan dife.
  • Tanperati: Do not store batteries or charger in temperatures over 60°C (140°F).
  • Imidite: To prevent fire or moisture, do not expose the charger to rain or excessive humidity.
  • Danje chòk: To reduce the risk of electronic shock, do not remove the cover or back plate of the charger.
Bonacell Super Cycle Battery and Protection Features

Image: Battery Cycle Life and Protections. This image illustrates the superior cycle life of Bonacell batteries compared to others, and highlights various protection features including over-discharge, over-charge, over-voltage, short-circuit, and over-current protection.

Depanaj

If you encounter issues with your Bonacell NP-FW50 Battery and LCD Dual Charger, please refer to the following common problems and solutions:

  • Pil yo pa chaje:
    • Ensure batteries are inserted correctly into the charger slots.
    • Verify the USB cable is securely connected to both the charger and the power source.
    • Try a different USB power source (e.g., another wall adapter, a different USB port on your computer) to rule out a faulty power source.
    • Check if the power source provides sufficient current (recommended 5V/2A).
  • Charger LCD not displaying:
    • Ensure the charger is connected to a working power source.
    • Check the USB cable for damage and try a different cable if necessary.
  • Battery swelling or overheating:
    • Immediately discontinue use of the battery and charger.
    • Contact customer support for assistance. Do not attempt to use or charge a swollen battery.

Espesifikasyon

KarakteristikSpesifikasyon
Kalite batriLi-ion
Kapasite batri1500mAh
Batri Voltage7.2V
Antre platoDC 5V / 2A
Sòti ChargerDC 8.4V / 0.6A (5W)
Dimansyon plato85 x 54 x 18 mm (apeprè 3.35 x 2.13 x 0.71 pous)
Pwa pwodwi6.4 ons (apeprè 181g)
Batri enkli2 pil ityòm Ion
Bonacell LCD Camera Battery Charger Specifications

Image: Charger Specifications. Imaj sa a bay yon detay view of the Bonacell LCD camera battery charger, including its input/output specifications and a table listing applicable battery type (NP-FW50), input (DC 5V/2A), output (DC 8.4V/0.6A), and dimensions (85*54*18 MM).

Garanti ak sipò

Enfòmasyon sou Garanti

Bonacell products are manufactured to high-quality standards. For specific warranty details regarding your NP-FW50 Battery and LCD Dual Charger, please refer to the warranty card included with your purchase or contact Bonacell customer support.

Sipò pou Kliyan

If you have any questions, concerns, or require technical assistance, please contact Bonacell customer support through the retailer where you purchased the product or visit the official Bonacell store for contact information.

You can find more information about Bonacell products at the Bonacell Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.