SONICAKE ROCKSTAGE

SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

Model: ROCKSTAGE (QCE-10)

1. Entwodiksyon

Mèsi pou acha aasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Karakteristik kle

  • One-stop gig solution for classic rock players with all necessary core effects.
  • Analog Plexi-style distortion for 80s/90s hard rock tones.
  • Analog BBD-style chorus for warm, dreamy soundscapes.
  • 500ms analog voice delay and high-quality reverb for expansive, spacy tones.
  • Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Ki sa ki nan bwat la

  • SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
  • XLR kab
  • Adaptè pouvwa (9V DC)
  • Manyèl itilizatè

4. Enstriksyon Enstalasyon

4.1 Koneksyon pouvwa

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Koneksyon Audio

  1. Antre gita: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  2. Sòti a Amplifier/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
  3. Sòti ekoutè: For silent practice, connect headphones to the 'PHONES' jack.
SONICAKE RockStage pedal with input and output jacks
Figi 1: Plis paseview of the SONICAKE RockStage pedal, showing input, output, and power connections.
SONICAKE RockStage pedal connected to guitar and amplifier
Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Operasyon Enstriksyon

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Modil Efè

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb
Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.
  • Koral: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
  • Wòch Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
  • Reta: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
  • Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted
Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage anviwònman.

SONICAKE RockStage pedal showing illuminated LED knobs
Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Portabilite

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag
Figure 6: The compact design allows for easy transport and setup.

6. Espesifikasyon

KarakteristikDetay
MakSONICAKE
Non modèlW RCHTAGE (QCE-10)
Dimansyon40L x 7l x 5.5H cm
Voltage9 Volts
Ampepòk20 Miliampere
Efè Sòti OdyoOverdrive, Distortion, Chorus, Reverb, Delay
Kalite kontwòlBouton, Manch
Sous pouvwaFil elektrik
Entèfas MateryèlMultiple Audio
Fòma siyalAnalòg
Kalite Connector3.5 mm Audio Jack
Peyi orijinLachin

7. Antretyen

  • Netwayaj: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
  • Depo: Sere pedal la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
  • Manyen: Evite lage pedal la oswa soumèt li a gwo enpak.
  • Pouvwa: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

NAN. Depanaj

  • Pa gen son:
    • Asire ke tout câbles yo byen konekte.
    • Verify the power adapter is correctly plugged in and providing power.
    • Check your guitar and ampparamèt volim lifter la.
    • Test with different cables to rule out faulty connections.
  • Bri/ronfleman endezirab:
    • Ensure you are using the correct power adapter.
    • Eseye itilize yon priz kouran diferan.
    • Keep the pedal away from other electronic devices that may cause interference.
  • Effect Not Activating:
    • Press the footswitch firmly. The LED should illuminate.
    • Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garanti & Sipò

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1 ane garanti pwodwi soti nan dat acha a.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE websit.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.