Graco FinishPro HVLP 7.0 Standard Sprayer User Manual

1. Enfòmasyon sou Sekirite

AVÈTISMAN: To reduce the risk of injury, the user must read and understand this instruction manual before using this product.

• Avoid eye contact with spray.
• Sèvi ak nan yon zòn ki byen vantile.
• Wear appropriate protective gear, including eye protection, gloves, and a respirator.
• Dispose of chemicals and materials properly according to local regulations.
• Toujou dekonekte kouran an anvan ou netwaye oswa fè antretyen.
• Asire w ke tout koneksyon an sekirite anvan operasyon an.

2. Pwodwi souview

The Graco FinishPro HVLP 7.0 Standard Sprayer (Model 17N263) is designed for precise application of various coatings, offering control and a high-quality finish. Key features include:

• Ultimate Control: Ideal for projects requiring fine finish.
• Sistèm zegwi: Includes a #3 size (1.3mm) needle, suitable for lacquers, stains, enamels, epoxies, urethane, and varnish. Needles are easily interchangeable.
• FlexLiner Bag System: Designed for lighter weight, easy cleanup, and ability to spray in any direction, including upside down. Facilitates quick color changes.
• Super-Flex Air Hose: 15% lighter than comparable hoses for improved control.
• TurboControl System: Allows adjustment of the TurboForce turbine speed to match performance requirements.
• EDGE II Gun: Features a 75% lighter trigger pull with EasyGlide technology.
• Standard Filtration System: Washable filter extends motor life and ensures a quality finish.

Figure 2.1: Graco FinishPro HVLP 7.0 Standard Sprayer unit.

Figure 2.2: The EDGE II Spray Gun with the FlexLiner cup system.

3. Enstalasyon

3.1 Debalaj ak enspeksyon

1. Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Inspect all parts for any damage that may have occurred during shipping. Do not operate if damaged.
3. Verifye tout konpozan ki nan lis nan seksyon "Sa ki nan bwat la" yo prezan.

3.2 Asanble

1. Connect the Super-Flex Air Hose to the HVLP unit and the EDGE II spray gun. Ensure connections are tight.
2. Attach the FlexLiner cup to the spray gun.
3. Select the appropriate needle for your material. The #3 (1.3mm) needle is included for fine finishes.
4. Ensure the filter is clean and properly installed in the unit.

Figure 3.1: The compact design allows for easy transport of the unit.

4. Operasyon Enstriksyon

4.1 Preparasyon Materyèl

1. Ensure your coating material is properly mixed and free of debris.
2. Pour the prepared material into the FlexLiner bag within the cup. Do not overfill.

4.2 Ajiste Anviwònman

1. Turn on the HVLP unit.
2. Use the TurboControl System dial to adjust the turbine speed. Higher speeds are generally for thicker materials or faster application.
3. Adjust the material flow knob on the EDGE II gun to control the amount of material being sprayed.
4. Test the spray pattern on a scrap piece of material to ensure desired coverage and finish.

Figure 4.1: Adjust the material flow and air cap for optimal spray pattern.

4.3 Teknik flite

• Maintain a consistent distance from the surface (typically 6-10 inches).
• Move the gun in smooth, even passes, overlapping each pass by about 50%.
• Release the trigger at the end of each pass to avoid excessive material buildup.
• The FlexLiner system allows spraying at various angles, including upside down, for hard-to-reach areas.

Figure 4.2: Maintain consistent motion for an even finish.

Figure 4.3: The FlexLiner system enables spraying in any direction, including upside down.

4.4 Changing Needles and Colors

• To change needles, ensure the unit is off and depressurized. Follow the gun's instructions for needle removal and insertion.
• For quick color changes, remove the current FlexLiner bag and replace it with a new one containing the desired color. This minimizes cleanup between colors.

Figure 4.4: Needles can be changed with a simple click mechanism.

4.5 Videyo pwodwi ofisyèl yo

5. Antretyen

5.1 Netwaye vaporisateur la

1. After each use, disconnect the power.
2. Remove the FlexLiner bag and dispose of any remaining material properly.
3. Clean the spray gun thoroughly with appropriate cleaning solution (water for latex, solvent for oil-based paints).
4. Clean the needle and air cap.
5. Rinse the FlexLiner cup if reusing, or dispose of it.
6. Clean the exterior of the HVLP unit.

5.2 Antretyen filtè

• Regularly inspect the standard filtration system filter.
• Clean the washable filter as needed to maintain optimal airflow and prevent motor strain.
• Replace the filter if it shows signs of damage or excessive wear.

NAN. Depanaj

7. Espesifikasyon

• Non modèl: FinishPro HVLP 7.0 Standard Series
• Nimewo Modèl: 17N263
• Mak: Graco
• Volim tank: 1 Kat
• Koulè: Ble
• Materyèl: Uretan
• Pwa atik: 18 liv
• Longè kawotchou: 240 pous (20 pye)
• Sous pouvwa: Electric (120V AC, 11 A)
• Max. Presyon: 7 psi
• Gwosè bouch: 1.3mm / 0.051 in (#3 needle)
• Max. Koule: 65 cfm
• Pattern Size: 1/4 pous pou 12 pous
• Eleman ki enkli: Instruction Guide, EDGE II Spray Gun
• Dimansyon (W x H): 13.25" lajè x 14" wotè

Figure 7.1: Approximate dimensions of the HVLP unit.

8. Garanti ak sipò

The Graco FinishPro HVLP 7.0 Standard Sprayer comes with a 3-ane garanti limite. For warranty claims, technical support, or replacement parts, please refer to the contact information provided in the included Instruction Guide or visit the official Graco websit.

Règleman retounen: This product is eligible for a 30-day refund/replacement policy from the seller (Amazon).