BEPER 40.300 Hair Clipper User Manual

1. Entwodiksyon

This manual provides essential instructions for the safe and effective use of your BEPER 40.300 Hair Clipper. Please read all instructions carefully before operating the device and retain this manual for future reference. The BEPER 40.300 is a rechargeable hair clipper equipped with ceramic and titanium blades, designed for precise cutting and comfortable handling.

2. Enfòmasyon sou Sekirite

• Kenbe aparèy la sèk. Pa sèvi avè l toupre dlo oswa nan kondisyon mouye.
• Pa plonje aparèy la nan dlo oswa nan lòt likid.
• Kenbe soti nan atenn timoun yo.
• Asire w adaptè kouran an konpatib ak ekipman pou kouran lokal ou a.
• Deploge aparèy la anvan netwaye oswa antretyen.
• Do not use if the blades are damaged or broken, as this may cause injury.
• Only use original accessories provided by the manufacturer.

3. Pake kontni

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact your retailer.

Image: The BEPER 40.300 Hair Clipper shown with all included accessories.

• BEPER 40.300 Hair Clipper
• Adaptè chaje
• Netwayaj Bwòs
• Boutèy lwil lubrifyan
• 4 Interchangeable Comb Attachments (3mm, 6mm, 9mm, 12mm)

4. Pwodwi souview

Familiarize yourself with the main components of your hair clipper before use.

Imaj: Bò kote view of the BEPER 40.300 Hair Clipper, highlighting its ergonomic design.

• Ceramic and Titanium Blades: For precise and efficient cutting.
• Adjustable Rotary Ring: Allows for fine-tuning of cutting lengths from 0.8mm to 2mm.
• Pouvwa switch: To turn the clipper on and off.
• Pò chaje: Pou konekte adaptè chaj la.
• Manch ergonomic: Ki fèt pou yon priz ak kontwòl konfòtab.

5. Enstalasyon

5.1 Chaje Tondez la

1. Asire w ke tondeuz la etenn.
2. Connect the charging adapter to the charging port on the clipper.
3. Ploge adaptè a nan yon priz kouran apwopriye.
4. Allow approximately 8 hours for a full charge. A fully charged clipper provides up to 60 minutes of continuous operation.
5. Pa chaje batri a twòp. Debranche chajè a yon fwa chaj la fini.

5.2 Mete Akseswa Peny yo

The clipper comes with 4 comb attachments for different cutting lengths (3mm, 6mm, 9mm, 12mm).

1. Asire w ke tondeuz la etenn.
2. Select the desired comb attachment.
3. Align the comb attachment with the clipper head and slide it on until it clicks securely into place.
4. To remove, gently push the comb attachment upwards and slide it off.

6. Operasyon Enstriksyon

6.1 Operasyon debaz

1. Ensure the clipper is fully charged or connected to power if using corded.
2. Select your desired cutting length using either the adjustable rotary ring or by attaching a comb guide.
3. Press the power switch to turn on the clipper.
4. Hold the clipper with the blades facing downwards and gently move it against the direction of hair growth.
5. For best results, use on clean, dry hair.
6. After use, press the power switch to turn off the clipper.

6.2 Adjusting Cutting Length (without comb attachment)

The rotary ring allows for precise adjustments of the blade length from 0.8mm to 2mm.

Image: Detail of the adjustable rotary ring on the BEPER 40.300 Hair Clipper, showing length settings.

• Rotate the ring located just below the blades to select your desired length: 0.8mm, 1.1mm, 1.4mm, 1.7mm, or 2mm.
• Ensure the ring clicks into place at the chosen setting before use.

6.3 Itilizasyon Akseswa Peny

For longer cutting lengths, use the provided comb attachments (3mm, 6mm, 9mm, 12mm).

• Attach the desired comb attachment as described in Section 5.2.
• The rotary ring setting will be overridden by the comb attachment.
• Move the clipper smoothly through the hair, ensuring the comb attachment remains flat against the scalp or skin.

7. Antretyen

Regular cleaning and maintenance will ensure optimal performance and extend the life of your hair clipper.

7.1 Netwayaj lam yo

1. Ensure the clipper is switched off and unplugged from the charger.
2. Remove any attached comb guide.
3. Sèvi ak bwòs netwayaj ki vini ak la pou retire cheve ki lach sou lam yo ak sou tèt tondeuz la.
4. For a more thorough clean, the blade set can be carefully detached (refer to specific instructions if provided with the product for blade removal). Rinse the detached blades under running water, ensuring the main body of the clipper does not get wet. Dry thoroughly before reattaching.
5. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.

7.2 Luilye lam yo

To maintain cutting performance, lubricate the blades regularly.

1. After cleaning, apply 1-2 drops of the provided lubricating oil to the blades.
2. Turn on the clipper for a few seconds to allow the oil to distribute evenly.
3. Siye nenpòt ki depase lwil oliv ak yon twal mou.

NAN. Depanaj

If you encounter issues with your BEPER 40.300 Hair Clipper, refer to the following common problems and solutions:

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan.

9. Espesifikasyon

• Modèl: 40.300
• Mak: BEPER
• Lam: Ceramic and Titanium
• Adjustable Cutting Lengths (without comb): 0.8mm, 1.1mm, 1.4mm, 1.7mm, 2mm
• Atachman peny: 3mm, 6mm, 9mm, 12mm
• Sous pouvwa: Rechargeable Battery (1 C battery included)
• Tan pou chaje: Apeprè 8 èdtan
• Tan operasyon: Jiska 60 minit (chaje nèt)
• Materyèl: Ceramic (blades)
• Dimansyon: 27.6 x 20.8 x 6.2 cm (Pakè)
• Pwa: 600 g (Pake)
• ASIN: B076DC7MGS
• GTIN: 08051772717940

10. Garanti ak sipò

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact BEPER customer service or your local retailer.

Kenbe resi acha ou a kòm prèv acha pou reklamasyon garanti.