Entwodiksyon
Thank you for choosing the Artemide Crazy Wall/Ceiling Lamp, Model 1638020A. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Enstriksyon Sekirite Enpòtan
To ensure safe operation and prevent damage, always follow these precautions:
- Sekirite elektrik: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture. Ensure all electrical connections comply with local codes and regulations. If you are unsure about wiring, consult a qualified electrician.
- Enstalasyon: This fixture is designed for wall or ceiling mounting. Ensure the mounting surface is structurally sound and can support the weight of the lamp (approximately 7 kg). Do not install in damp oswa kote ki mouye.
- Manyen: Manyen l laamp avèk prekosyon. Evite lage l oswa sibi gwo enpak.
- Dirije entegre: Sa a lamp features an integrated LED light source. Do not attempt to replace the LED bulbs yourself. Contact qualified service personnel if the light source requires attention.
- Netwayaj: Use only a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents that may damage the finish or electrical components.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- Artemide Crazy Lamp (1 inite)
- Montaj pyès ki nan konpitè (vis, lank)
- Manyèl Enstriksyon (dokiman sa a)
Enstalasyon ak Enstalasyon
Installation should be performed by a qualified professional or a person with sufficient electrical knowledge.
Zouti obligatwa (pa enkli)
- tournevis (tèt Phillips)
- Fè egzèsis ak ti moso ki apwopriye
- Denude Fil
- Voltage tèsteur
- Pencil and measuring tape
Enstriksyon pou monte
- Etenn pouvwa: Jwenn disjonktè ki kontwole pozisyon aparèy limyè a epi koupe kouran an. Verifye si kouran an koupe lè w sèvi ak yon vòltaj.tage tèsteur.
- Prepare Sifas Montage: Mark the desired location for the lamp on the wall or ceiling. Use the mounting bracket as a template to mark drill holes.
- Fè twou: Drill pilot holes at the marked locations. Insert wall anchors if necessary for secure mounting.
- Atache Sipò Montaj la: Sekire parantèz la aliye nan miray la oswa nan plafon lè l sèvi avèk vis yo bay yo.
- Koneksyon elektrik: Ak anpil atansyon konekte l laamp's electrical wires to the household wiring. Typically, connect the live (black/brown) wire from the lamp to the live wire from the wall, the neutral (white/blue) wire from the lamp to the neutral wire from the wall, and the ground (green/yellow) wire to the ground wire. Ensure all connections are secure with wire nuts.
- Tache Lamp Aparèy: Ak anpil atansyon aliman l laamp fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched.
- Retabli pouvwa: Yon fwa ke lamp is securely installed and all connections are checked, restore power at the circuit breaker.
Image: The Artemide Crazy Wall/Ceiling Lamp, montreasing its design and taupe color. This image illustrates the general appearance of the product after installation.
Nòt sou Videyo yo: No official product installation videos were available from the seller for this model. Please refer to the detailed written instructions above.
Opere Lamp
The Artemide Crazy Lamp li fèt pou operasyon senp.
- Limen/Etenyen: Opere lamp using a standard wall switch connected to its electrical circuit.
- Sous limyè: L laamp features an integrated LED light source, providing consistent illumination.
Swen ak Antretyen
Proper care will ensure the longevity and appearance of your Artemide Crazy Lamp.
- Netwayaj: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, lint-free cloth to gently wipe the surface of the lamp. For stubborn marks, a slightly damp cloth may be used, followed immediately by a dry cloth.
- Evite pwodwi chimik yo: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS/Polycarbonate/Technopolymer material and finish.
- Dirije entegre: The LED light source is integrated and designed for a long lifespan. It does not require routine replacement. If the light source fails, contact customer support.
Depanaj
Si ou rankontre pwoblèm ak l ou aamp, refer to the following table for common problems and solutions.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Lamp pa limen. | Pa gen ekipman pou pouvwa. Koneksyon elektrik ki lach. Entèriptè miray ki gen pwoblèm. | Tcheke si disjonktè a limen. Asire w tout koneksyon fil yo byen fèm (ak kouran an koupe). Test the wall switch or consult an electrician. |
| Limyè flickers. | Koneksyon elektrik ki lach. Incompatible dimmer switch (if applicable, though not specified for this model). | Tcheke tout koneksyon elektrik yo (lè kouran an etenn). Asire lamp is connected to a compatible circuit. |
| Lamp se domaje. | Enpak fizik. Defo fabrikasyon. | Discontinue use. Contact customer support for assistance. |
Espesifikasyon teknik
Detailed specifications for the Artemide Crazy Wall/Ceiling Lamp:
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | 1638020A |
| Mak | Artemide |
| Designer | Ernesto Gismondi |
| Dimansyon (L x W x H) | 70 x 0.1 x 10 cm |
| Pwa | 7 Kilogram |
| Materyèl | ABS/Polycarbonate/Technopolymer, Acrylonitrile Butadiene Styrene |
| Koulè | Taupe (Shade color: White) |
| Kalite aliye | Montaj miray oswa plafon |
| Kalite sous limyè | Entegre dirije |
| Kantite sous limyè | 1 |
| Wattage | 35 Watts |
| Efikasite lumineux | 3310 Lumen |
| Tanperati Koulè | 2700 Kelvin |
| Enèji Label | A++ |
| Sous pouvwa | Kab elektrik |
| Manifakti | Eden Illuminizione |
Garanti ak sipò pou kliyan
Artemide products are manufactured to high-quality standards and are covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your purchase or visit the official Artemide websit la pou wè tèm ak kondisyon garanti detaye yo.
For technical assistance, replacement parts, or any questions regarding your Artemide Crazy Lamp, please contact your authorized Artemide dealer or customer service department. Contact information can typically be found on the official Artemide websit la oubyen sou dokiman acha ou a.