Transformers E0767

Transformers E0767 Shatter Energon Igniters Action Figure Instruction Manual

1. Pwodwi souview

This manual provides instructions for the Transformers E0767 Shatter Energon Igniters Action Figure. This figure is designed to convert between robot and jet modes in 5 steps and features an Energon Igniter core for enhanced play.

  • Mak: Transformateur
  • Nimewo Modèl: E0767
  • Dimansyon pwodwi: 2.38 x 7 x 6 pous
  • Pwa atik: 3.17 ons
  • Laj rekòmande: 5 ane ak plis

The Shatter figure is part of the Transformers universe, allowing users to engage in imaginative play by transforming the character between its distinct modes.

Transformers Shatter figure in packaging, showing both robot and jet modes.

Figure packaging displaying the Transformers Shatter character in both robot and jet forms.

2. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enfòmasyon sekirite yo anvan ou itilize pwodui sa a.

  • Avètisman: Small parts may be generated. This product is not suitable for children under 3 years due to potential choking hazards.
  • Li rekòmande pou gen yon granmoun k ap siveye l pandan y ap jwe, sitou pou timoun piti.
  • Avoid forcing parts during transformation to prevent breakage.

3. Transformation Instructions

The Transformers E0767 Shatter figure converts between robot mode and jet mode in 5 steps. Refer to the included visual instructions on the product packaging or the general transformation video for guidance.

3.1. Jet Mode to Robot Mode

To transform Shatter from jet mode to robot mode, carefully manipulate the figure's components. The transformation involves a sequence of folding and unfolding parts to reveal the robot form. Ensure each joint clicks into place securely.

Transformers Shatter figure in its red and black jet mode.

The Shatter figure displayed in its sleek jet mode.

Transformers Shatter figure in its red and grey robot mode with wings.

The Shatter figure in its robot mode, ready for action.

3.2. Robot Mode to Jet Mode

To convert Shatter back to jet mode, reverse the transformation steps. Fold the robot's limbs and body panels to form the jet's fuselage and wings. Pay attention to alignment to ensure a complete and secure transformation.

3.3. Energon Igniters Feature

The Energon Igniters feature allows for dynamic action. Locate the designated slot on the figure (typically on the back or top in vehicle mode) and insert the Energon Igniter core. Pressing down on the core activates a spinning action, simulating the power of Energon.

A hand pressing down on the blue Energon Igniter core inserted into the Transformers Shatter jet figure.

Activating the Energon Igniter by pressing down on the core in jet mode.

A hand lifting the blue Energon Igniter core from the Transformers Shatter jet figure.

Removing the Energon Igniter core from the figure.

For a visual demonstration of the Energon Igniters feature and general transformations, please refer to the video below.

Official demonstration video showcasing various Transformers figures, including transformations and the Energon Igniters feature. This video provides a general overview of the play pattern for the Energon Igniters line.

4. Operating the Figure

Once transformed into either robot or jet mode, the figure can be posed for display or used in imaginative play scenarios. The Energon Igniter core can be inserted and activated in vehicle mode to simulate power-up effects.

  • Ensure all parts are securely connected after transformation to maintain stability during play.
  • Avoid excessive force when posing joints to prevent damage.

5. Antretyen ak Swen

To ensure the longevity of your Transformers figure, follow these care guidelines:

  • Netwayaj: Wipe the figure with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Depo: Sere figi a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
  • Manyen: Handle the figure with care, especially during transformations, to avoid stress on joints and small parts.

NAN. Depanaj

Si ou rankontre nenpòt pwoblèm ak silwèt ou, konsidere bagay sa yo:

  • Difficulty Transforming: Ensure you are following the correct sequence of steps. Do not force parts; if a part is stuck, gently re-examine the transformation path.
  • Jwenti ki lach: Over time, joints may become slightly loose with repeated use. This is normal wear and tear for action figures.
  • Pati ki manke: Check the packaging thoroughly. If a part is genuinely missing upon purchase, contact the retailer or manufacturer.

7. Espesifikasyon

KarakteristikDetay
Dimansyon pwodwi2.38 x 7 x 6 pous
Pwa atik3.17 ons
ASINB075LNDNBH
Nimewo Modèl AtikE0767
Manifakti laj rekòmande5 ane ak plis
Dat lage20 avril 2018
ManifaktiHasbro
Konpozan ki enkliAction Figure (Shatter)

8. Garanti ak sipò

Specific warranty information for this product is not provided in the available data. For warranty details, product support, or to inquire about replacement parts, please contact Hasbro customer service directly or refer to their official websit.

You can visit the official Transformers store for more information:

Transformers Official Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.