Lepro Industrial LED Desk Lamp

Entwodiksyon

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Sa a versatile lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Tanpri li manyèl sa a byen anvan enstalasyon ak itilizasyon, epi konsève li pou referans pita.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Enstriksyon Sekirite

• Li tout enstriksyon yo ak anpil atansyon anvan ou itilize l la.amp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Sèvi ak sèlman anpoul ki gen baz E27 ki gen yon puisans maksimòm.tage nan 40W.
• Pa sèvi ak lamp ak yon fil elektrik oswa ploge ki domaje.
• Pwodui sa a fèt pou itilizasyon andedan kay la sèlman. Pa ekspoze l nan dlo oswa imidite ki wo.
• Kenbe l laamp lwen materyèl ki ka pran dife.
• Pa eseye demonte oswa repare lamp Kontakte pèsonèl kalifye pou sèvis.

Kontni pake

Tanpri tcheke pake a pou atik sa yo:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Manyèl itilizatè

Note: The E27 bulb is not included and must be purchased separately.

Enstalasyon ak Enstalasyon

Follow these steps to assemble and install your desk lamp:

1. Tache Clamp: Byen tache cl laamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Rasanble Lamp Tèt: Enstale lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Ak anpil atansyon mete l laamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Enstale anpoul la: Asire lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp priz. Pa sere twòp.
5. Konekte ak pouvwa: Ploge l laamp's power cord into a suitable electrical outlet.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Imaj: L laamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Enstriksyon Operasyon

Limen/Etenyen: Locate the rocker switch on the power cord. Press the switch to turn the lamp sou oswa koupe.

Ajiste ang limyè a: L laamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Imaj: L laamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Antretyen

Netwayaj: Pou netwaye lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Ranplasman anpoul: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp tounen antre.

Depanaj

• Lamp pa limen:
  • Tcheke si kòd elektrik la byen konekte nan priz la.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Tcheke priz kouran an lè w branche yon lòt aparèy.
• Limyè ap tranble:
  • Asire w ke anpoul la byen vise.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp is unstable:
  • Asire clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Tcheke ke lamp arm is properly inserted into the clamp jwenti.

Espesifikasyon

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garanti ak sipò

Garanti: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Sipò Kliyan: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.