Youn Pou Tout SV1770

One For All SV1770 Bluetooth Audio Transmitter User Manual

Model: SV1770 | Brand: One For All

Entwodiksyon

The One For All SV1770 Bluetooth Audio Transmitter provides a wireless solution for transmitting audio from your television or other audio sources to Bluetooth-enabled headphones. This device allows for private listening without disturbing others and supports simultaneous connection for up to two pairs of headphones. It incorporates aptX technology for enhanced sound quality and is conveniently powered via USB.

Kontni pake

Tanpri verifye ke tout atik yo prezan nan pakè a:

  • One For All SV1770 Bluetooth Audio Transmitter unit
  • 3.5 mm stereo odyo kab
  • RCA audio cable (red/white)
  • USB pouvwa kab
One For All SV1770 Bluetooth Audio Transmitter and included accessories

Image: The One For All SV1770 Bluetooth Audio Transmitter shown with its included accessories, which are a 3.5mm audio cable, an RCA audio cable, and a USB power cable.

Enstalasyon

Connecting the Transmitter to Your TV/Audio Source

The SV1770 can be connected to your TV or audio source using either the 3.5mm audio output or the RCA audio outputs.

  1. Koneksyon pouvwa: Connect the USB power cable from the transmitter to a free USB port on your TV or a USB power adapter (not included). The transmitter requires 5V USB power.
  2. Koneksyon Odyo (3.5mm): If your TV or audio source has a 3.5mm headphone jack, connect one end of the 3.5mm stereo audio cable to the transmitter's 3.5mm input and the other end to the TV's headphone jack.
  3. Audio Connection (RCA): If your TV or audio source has RCA audio output ports (typically red and white), connect the RCA audio cable to these ports and the other end to the transmitter's RCA input.
One For All SV1770 Bluetooth Audio Transmitter connected to a TV

Image: The SV1770 Bluetooth Audio Transmitter is shown connected to the rear of a television, utilizing both RCA audio cables for sound input and a USB port for power.

Pè ak ekoutè Bluetooth

Follow these steps to pair your Bluetooth headphones with the SV1770 transmitter:

  1. Ensure the SV1770 transmitter is powered on. The LED indicator will show its status.
  2. Put your Bluetooth headphones into pairing mode. Refer to your headphone's instruction manual for specific instructions.
  3. Press and hold the pairing button on the SV1770 transmitter for approximately 3 seconds until the LED indicator flashes rapidly, indicating it is in pairing mode.
  4. Place the headphones close to the transmitter. The devices should automatically connect. Once connected, the LED indicator on the transmitter will change to a steady blue light.
  5. To connect a second pair of headphones, repeat steps 2-4. The transmitter can support up to two pairs of headphones simultaneously.

Enstriksyon Operasyon

Transmisyon odyo

Once successfully paired, audio from your connected TV or audio source will be transmitted wirelessly to your Bluetooth headphones.

Kontwòl Volim

Volume control is typically managed directly on your Bluetooth headphones. The transmitter does not have independent volume controls.

Rekonekte

After initial pairing, the transmitter and headphones should automatically reconnect when both devices are powered on and within range. If they do not reconnect, briefly press the pairing button on the transmitter to initiate reconnection.

Antretyen

  • Keep the transmitter clean by wiping it with a soft, dry cloth.
  • Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
  • Pa eseye louvri oswa repare aparèy la tèt ou, paske sa ap anile garanti a.

Depanaj

PwoblèmSolisyon
Pa gen son nan kas ekoutè yo.
  • Ensure the transmitter is powered on and the LED indicator is solid blue.
  • Verify that the headphones are paired and connected to the transmitter.
  • Check the audio cable connection between the transmitter and the TV/audio source.
  • Confirm the TV's audio output is active and not muted.
  • Increase the volume on your headphones.
Cannot pair headphones.
  • Ensure both the transmitter and headphones are in pairing mode (flashing LED).
  • Deplase kas ekoutè yo pi pre transmetè a.
  • Etenn lòt aparèy Bluetooth ki tou pre pou evite entèferans.
  • Try resetting both the transmitter and headphones (refer to their respective manuals).
Poor audio quality or dropouts.
  • Ensure the transmitter and headphones are within the 10-meter range.
  • Minimize obstacles (walls, large objects) between the devices.
  • Check for sources of interference (Wi-Fi routers, microwaves).
  • Verifye kalite sous odyo a.

Espesifikasyon

  • Modèl: SV1770
  • Bluetooth vèsyon: 3.0
  • Kodèk Bluetooth: aptX, SBC
  • Ranje san fil: Jiska 10 mèt (33 pye)
  • Kalite Sòti Audio: Bluetooth
  • Audio Sòti Mode: Stereo
  • Features Audio: Wolfson D/A converter, up to 24 bit 192 kHz
  • Entèfas pyès ki nan konpitè: Bluetooth 3.0, USB 3.0 (for power)
  • Aparèy konpatib: TV, stereo, any audio device with 3.5mm or RCA audio output
  • Sous pouvwa: USB (5V)
  • Dimansyon pwodwi: 17 x 4 x 1.6 cm
  • Pwa: 31 g
  • Materyèl: Polikarbonat

Garanti ak sipò

For warranty information and technical support, please refer to the official One For All websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò sou entènèt: Vizite www.oneforall.com for FAQs, product registration, and contact details.

Sèvis Kliyan: Gade enfòmasyon kontak ki sou anbalaj pwodwi w la oubyen sou fich ofisyèl la. website for regional support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.