Manyèl Enstriksyon Motosiklèt ILM Demi Kas Modèl-205V

1. Enfòmasyon sou Sekirite

Your safety is paramount. Always wear appropriate protective gear when operating a motorcycle. This ILM Half Helmet Model-205V is designed to provide protection and comfort, meeting DOT & FMVSS 218 safety standards.

Ensure the helmet fits snugly and securely before every ride.
Never modify the helmet's structure or components.
Replace the helmet immediately after any impact, even if visible damage is not apparent.
Clean the helmet only with recommended cleaning agents to avoid material degradation.

ILM Half Helmet showing ABS shell construction — **Figi 1:** The helmet features a high-quality ABS shell designed for enhanced protection. This image highlights the durable outer construction of the helmet.

Videyo 1: Yon souview of the ILM Half Helmet Model-205V, demonstrating its features and DOT certification. This video provides a visual guide to the helmet's design and safety standards.

2. Pwodwi souview

The ILM Half Helmet Model-205V is an open-face motorcycle helmet designed for comfort and ease of use. Key features include:

DOT & FMVSS 218 Approved: Ensures compliance with safety standards.
Integrated Drop-Down Sun Visor: Provides eye protection from sun and glare.
Quick Release Chin Strap: Allows for easy on and off.
Sistèm ajisteman anfòm: Ensures a comfortable and secure fit for various head sizes.
Premium Venting: Reduces heat buildup for improved comfort.

ILM Half Helmet, front-side view — **Figi 2:** Front-bò view of the ILM Half Helmet, showcasing its sleek design and integrated visor.

3. Enstalasyon

3.1 Ajisteman anfòm nan

The helmet features an adjustable dial at the back to customize the fit to your head circumference. This ensures a snug and secure feel.

Mete kas la sou tèt ou.
Locate the adjustment dial at the rear interior of the helmet.
Turn the dial clockwise to tighten the fit, or counter-clockwise to loosen it, until the helmet feels secure without being uncomfortably tight.

Dèyè view of ILM Half Helmet showing adjustable dial — **Figi 3:** The adjustable dial located at the back of the helmet allows for a customized and secure fit.

Videyo 2: This video demonstrates how to properly adjust the helmet for a better fit using the internal adjustment system.

3.2 Securing the Chin Strap

The quick-release buckle ensures the helmet stays in place while allowing for easy removal.

Fasten the chin strap by inserting the male end into the female receiver until it clicks.
Adjust the strap length to ensure a snug fit under your chin, allowing only one or two fingers to fit between the strap and your chin.
To release, pull the red tab on the buckle.

Close-up of the quick release chin strap buckle — **Figi 4:** Yon fèmen view of the quick-release chin strap buckle, designed for secure fastening and easy removal.

4. Operating the Integrated Sun Visor

The helmet features an integrated, retractable sun visor for convenient eye protection.

To deploy the sun visor, locate the small tab on the bottom edge of the visor.
Gently push the tab downwards until the visor is in the desired position.
To retract the sun visor, push the tab upwards until the visor is fully concealed within the helmet shell.

ILM Half Helmet with retractable sun visor deployed — **Figi 5:** The helmet with its integrated sun visor in the deployed position, offering eye protection.

Videyo 3: This video illustrates the operation of the integrated sun visor and the quick-release buckle on the ILM Half Helmet.

5. Antretyen

5.1 Cleaning the Helmet Shell

Sèvi ak yon twal mou dampened with mild soap and water to clean the exterior shell. Avoid abrasive cleaners or solvents that could damage the finish.

5.2 Cleaning the Sun Visor

Clean the sun visor with a soft, lint-free cloth and warm water. For stubborn dirt, use a mild soap solution. Do not use abrasive materials or chemical cleaners, as they can scratch or damage the visor coating.

5.3 Cleaning the Interior Padding

The interior padding is designed for comfort and can be gently cleaned. Use a damp cloth with mild soap and water, then allow it to air dry completely before use.

Close-up of the helmet's interior padding and mesh — **Figi 6:** Detaye view of the helmet's breathable mesh and soft interior lining, designed for comfort and heat reduction.

NAN. Depanaj

6.1 Helmet Feels Loose or Too Tight

Adjust the internal dial at the back of the helmet (refer to Section 3.1) to achieve a snug yet comfortable fit. Ensure the chin strap is also adjusted correctly.

6.2 Sun Visor Not Operating Smoothly

Check for any obstructions around the visor mechanism. Ensure the visor is clean and free of debris. If the issue persists, contact customer support.

6.3 Chin Strap Not Securing

Verify that the male end of the buckle is fully inserted into the female receiver until a distinct click is heard. Inspect the buckle for any damage. If damaged, discontinue use and replace the helmet.

7. Espesifikasyon

Karakteristik	Detay
Non modèl	ILM-205V
Shell Materyèl	Akrilonitrile butadien stirèn (ABS)
Sètifikasyon sekirite	DOT & FMVSS No. 218 Certified
Pwa atik	2.7 liv
Dimansyon pwodwi	12.5 x 9.8 x 6.9 pous
Karakteristik espesyal	Integrated Sun Visor, Quick Release Buckle
Fini Kalite	Mat

8. Gid gwosè

Refer to the following size chart to ensure optimal fit. Measure your head circumference accurately.

Gwosè mak la	Sikonferans tèt (nan)	Hat Size (in)
Ti	21.6- 22	6.9- 7
Mwayen	22.5- 22.9	7.1- 7.3
Gwo	23.3- 23.6	7.4- 7.5
X-Gwo	24- 24.4	7.6- 7.8
XX-Gwo	24.8- 25.3	7.9- 8

Sizing information is provided by the manufacturer and does not mean a perfect fit. Please use this chart as a guide only.

9. Garanti ak sipò

For warranty information, product support, or any inquiries not covered in this manual, please contact ILM customer service through their official websit la oswa magazen kote ou te achte pwodwi a. Kenbe prèv acha ou pou reklamasyon garanti.

Ou ka vizite a ILM Store on Amazon pou plis enfòmasyon ak sipò.

ILM ILM-205V

ILM Half Helmet Motorcycle Instruction Manual