1. Pwodwi souview
The Beam Electronics DGC2020 Car Phone Holder Mount is designed to securely hold your smartphone in your vehicle. It features a quick-release button for easy phone removal and a 360-degree rotating head for optimal viewing angles. This mount is compatible with a wide range of smartphones and electronic devices.
Karakteristik kle:
- Bouton degaje rapid: Press the button on the back to open the arms and retrieve your mobile phone. Press the arms together to clamp the phone securely.
- Wotasyon 360 degre: The fully 360-degree rotation provides the best viewing angle for navigation, calls, or music.
- Gwo konpatibilite: Fits most cellphones and electronic devices with a width from 1.9 inches to 3.7 inches.
- Single-handed Operation: Designed for simple installation and removal of smartphones with no tools required.
Image 1.1: The Beam Electronics Car Phone Holder Mount securely installed in a vehicle's air vent, displaying a smartphone.
2. Enstalasyon ak Enstalasyon
Follow these steps to properly install your car phone holder mount:
- Identify Compatible Air Vent: The mount is designed for horizontal or vertical air vents. Ensure your vehicle's vent type is compatible.
- Tache mòn lan: Locate the clip mechanism on the back of the phone holder. Push the clip firmly onto one of the air vent blades.
- Sekirize clip la: On the back of the clip, there is a lever or knob to tighten the grip. Adjust it to ensure the mount is securely fastened to the vent and does not wobble.
Imaj 2.1: Eksploze view highlighting key components: adjustable side-grip arms, 360-degree rotatable pivot, quick-release button, and the cushioned air vent clip.
Image 2.2: Visual guide for compatible and incompatible car air vent designs for secure mounting.
Video 2.1: Demonstrates installation tips for the car phone holder mount in various car models, showing how to attach it to the air vent and adjust for optimal positioning.
3. Operasyon Enstriksyon
Inserting Your Phone:
- Gently pull open the adjustable side-grip support arms of the holder.
- Place your smartphone into the holder, ensuring it rests on the bottom support feet.
- Press the adjustable arms inward until they securely grip your phone. The arms will lock into place, holding your device firmly.
Retire telefòn ou an:
- Locate the quick-release button on the back of the holder (refer to Image 2.1).
- Press the quick-release button. The side-grip arms will automatically slide open.
- Carefully remove your smartphone from the holder.
Image 3.1: A finger demonstrating the quick-release button on the back of the mount, which expands the arms for phone removal.
Ajiste a Viewing Ang:
The phone holder features a 360-degree rotatable pivot. Simply rotate the phone holder to achieve your desired vertical or horizontal viewing angle. Ensure the angle is adjusted before driving to avoid distraction.
Video 3.1: Shows the phone holder's adjustable side grips and 360-degree rotation, demonstrating how it securely holds various phone sizes and allows for flexible viewang ing.
Video 3.2: Illustrates the ease of use for the Beam Electronics car phone holder, including phone insertion, removal, and rotation, highlighting its sturdy grip.
4. Swen ak Antretyen
- Netwayaj: Siye detantè a ak yon twal mou, damp twal pou retire pousyè ak debri. Evite itilize pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Enspeksyon: Periodically check the air vent clip and phone gripping arms for any signs of wear or damage. Ensure all moving parts operate smoothly.
- Tanperati: While the product is designed to be heat and cold resistant, extreme temperatures can affect its longevity. Avoid prolonged exposure to direct sunlight or extreme cold when not in use.
NAN. Depanaj
- Mount feels loose on the vent: Ensure the tightening lever/knob on the back of the clip is fully engaged and tightened. Re-adjust if necessary.
- Telefòn nan pa byen kenbe: Make sure the side-grip arms are fully closed around your phone. The holder is compatible with devices between 1.9 and 3.7 inches in width.
- Difficulty with quick-release button: Ensure the button is pressed firmly and completely. If it still sticks, check for any obstructions or debris.
6. Spécifications pwodwi
| Karakteristik | Spesifikasyon |
|---|---|
| Dimansyon pwodwi | 2.72 x 3.39 x 5.51 pous |
| Pwa atik | 0.071 ons |
| Nimewo Modèl Atik | DGC2020 |
| Karakteristik espesyal | Adjustable, Cold Resistant, Heat Resistant, Rotatable |
| Koulè | Gri, Nwa |
| Aparèy konpatib | Smartphones |
| Modèl Telefòn konpatib | iPhone 12, 11 Pro Max, XS, XR, X, 8+, 7+, SE, 6s, 6+, 5s, 4; Samsung Galaxy S6, HTC, LG, Nexus, Nokia (width 1.9 to 3.7 inches) |
| Kalite aliye | Vant |
7. Garanti ak sipò
This Beam Electronics Car Phone Holder Mount comes with a 1-ane garanti from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.
For warranty claims, technical support, or any inquiries regarding your product, please contact Beam Electronics customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (DGC2020) ready when contacting support.