PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Entwodiksyon

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Enstriksyon Sekirite

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Sekirite lazè: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Sekirite batri: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Anviwònman Fonksyònman: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Antretyen: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• PeakTech P 2800A Laser Distance Meter
• Étui senti
• 2 pil alkalin AAA 1.5V
• User Manual (German and English)
• Konfimasyon kalibrasyon

4. Aparèy souview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Figi 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview nan layout aparèy la.

Figi 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Figi 3: Fèmen view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Figi 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• INITE: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Reference Point Button: Changes the measurement reference point (front, rear, flip-out stop).
• Bouton memwa: Accesses stored measurements.
• Bouton ekleraj: Toggles display backlight.
• Ekspozisyon LCD: Multi-line display showing current measurements, previous results, and function icons.

5. Enstalasyon

5.1 Enstalasyon batri

1. Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
2. Glise oswa deklipe kouvèti a pou ouvri konpatiman an.
3. Mete de pil alkalin 1.5V AAA yo nan plas yo, epi asire w polarite a kòrèk (+/-).
4. Fèmen kouvèti lòj batri a byen.

The device will automatically power on or can be powered on by pressing the MEAS bouton.

6. Operasyon Enstriksyon

6.1 Power On/Off

• Pouvwa sou: Peze a MEAS bouton.
• Pouvwa Off: Peze epi kenbe la OFF/CLEAR button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Chanje Inite Mezi yo

Peze a INITE button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Pwen Referans button to switch between these options. The current reference point is indicated on the display.

6.4 Mezi Distans Single

1. Dirije lazè a sou sib la.
2. Peze a MEAS bouton an yon fwa pou aktive lazè a.
3. Peze a MEAS button again to take the measurement. The result will be displayed.

6.5 Mezi Kontinyèl (Min/Max)

1. Peze epi kenbe la MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Peze MEAS again to stop continuous measurement.

6.6 Mezi Zòn

1. Peze a Zòn/Volim button once to enter area measurement mode. An icon for area will appear on the display.
2. Mezire premye bò a (pa egzanp, longè a) lè w peze MEAS.
3. Mezire dezyèm bò a (pa egzanp, lajè) lè w peze MEAS.
4. The calculated area will be displayed.

6.7 Mezi Volim

1. Peze a Zòn/Volim button twice to enter volume measurement mode. An icon for volume will appear.
2. Mezire longè a lè w peze MEAS.
3. Mezire lajè a lè w peze MEAS.
4. Mezire wotè a lè w peze MEAS.
5. The calculated volume will be displayed.

6.8 Mezi Pitagò (Mezi Endirèk)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Peze a Pitagò button to select the desired indirect measurement mode.
2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
3. The device will calculate and display the unknown height or distance.

6.9 Adisyon ak Soustraksyon

Apre ou fin pran yon mezi, ou ka ajoute oswa soustrè mezi ki vin apre yo:

1. Pran yon mezi.
2. Peze a + bouton pou adisyon oubyen - bouton pou soustraksyon.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Repete jan sa nesesè.

6.10 Fonksyon memwa

The device can store up to 99 measurement values.

• Magazen: Measurements are automatically stored.
• Rapèl: Peze a memwa bouton pou view stored values. Use the + epi - buttons to scroll through the memory.
• Klè memwa: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Antretyen

• Netwayaj: Sèvi ak yon mou, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Depo: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Ranplasman batri: Ranplase pil yo lè endikatè pil ki fèb la parèt sou ekran an.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech websit oswa kontakte depatman sèvis kliyan yo.