Transformers C3481

Transformers Allspark Tech Autobot Sqweeks Action Figure Instruction Manual

1. Pwodwi souview

The Transformers Allspark Tech Autobot Sqweeks figure is an interactive action figure designed to be powered by the Allspark Tech cube. This figure features motion-activated lights, sounds, and phrases when connected to an Allspark Tech cube. The Autobot Sqweeks figure is a 5.5-inch scale non-converting figure.

Transformers Allspark Tech Autobot Sqweeks figure in packaging, showing the figure, Allspark Tech cube, and USB charging cord.

Image 1.1: The Transformers Allspark Tech Autobot Sqweeks figure, Allspark Tech cube, and USB charging cord as packaged.

2. Enfòmasyon sou Sekirite

Please read all instructions before use. This product is intended for ages 6 and up. Adult supervision is recommended during charging and initial setup. Keep small parts away from young children to prevent choking hazards. Do not attempt to modify the Allspark Tech cube or the figure, as this may cause damage or injury.

3. Sa ki enkli

  • Transformers: The Last Knight Allspark Tech Autobot Sqweeks figure
  • Allspark Tech cube (rechargeable 150mAh LiPo battery included)
  • USB chaje kòd
  • Enstriksyon yo
Transformers Allspark Tech Autobot Sqweeks figure with its weapon, the Allspark Tech cube, and the USB charging cable laid out.

Image 3.1: Contents of the Allspark Tech Autobot Sqweeks package.

4. Enstalasyon

4.1 Charging the Allspark Tech Cube

  1. Locate the USB charging cord.
  2. Connect the small end of the USB charging cord to the Allspark Tech cube.
  3. Connect the large end of the USB charging cord to a powered USB port (e.g., computer, USB wall adapter).
  4. The cube will illuminate to indicate charging. A full charge typically takes approximately 30 minutes.
A hand holding the Allspark Tech cube, showing its intricate design.

Image 4.1: The Allspark Tech cube.

4.2 Inserting the Allspark Tech Cube into the Figure

  1. Ensure the Allspark Tech cube is charged.
  2. Locate the compartment on the Autobot Sqweeks figure designed for the Allspark Tech cube. This is typically on the chest area.
  3. Louvri konpatiman an avèk prekosyon.
  4. Insert the charged Allspark Tech cube into the compartment, ensuring it is seated correctly.
  5. Fèmen lòj la byen.
A hand inserting the glowing blue Allspark Tech cube into the chest compartment of the Autobot Sqweeks figure.

Image 4.2: Inserting the Allspark Tech cube into the Autobot Sqweeks figure.

5. Operasyon Enstriksyon

5.1 Activating Lights, Sounds, and Phrases

Once the Allspark Tech cube is securely inserted into the Autobot Sqweeks figure, the figure will come to life. The cube activates over 15 unique lights, sounds, and phrases.

5.2 Motion-Activated Effects

The figure is designed with motion-activated technology. Moving the figure will trigger various epic effects, allowing for interactive play. Experiment with different movements to discover all the activated responses.

5.3 Tache Pwodwi pou Telefòn

The Autobot Sqweeks figure comes with a detachable weapon accessory. This accessory can be attached to the figure's hand to enhance play scenarios.

A hand holding a black weapon accessory next to the Autobot Sqweeks figure, demonstrating how the accessory is separate.

Image 5.1: Autobot Sqweeks figure with its weapon accessory.

6. Antretyen

6.1 Netwayaj

To clean the figure, wipe it with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Avoid submerging the figure or the Allspark Tech cube in water.

6.2 Depo

Store the figure and Allspark Tech cube in a cool, dry place away from direct sunlight and extreme temperatures. Remove the Allspark Tech cube from the figure if storing for extended periods.

NAN. Depanaj

7.1 Figure Not Responding

  • Ensure the Allspark Tech cube is fully charged.
  • Verify that the Allspark Tech cube is correctly inserted into the figure's compartment.
  • Check for any obstructions in the cube compartment.

7.2 Pwoblèm chaj

  • Confirm the USB charging cord is securely connected to both the cube and a powered USB port.
  • Eseye yon lòt pò USB oswa yon lòt adaptè chaj.
  • Ensure the USB charging cord is not damaged.

8. Espesifikasyon

MakTransformateur
Nimewo ModèlC3481
ManifaktiHasbro
Ranje laj6 a 99 ane (72 a 1188 mwa)
Kalite MateryèlPlastik
Dimansyon atik (L x W x H)2.64 x 9.49 x 7.01 pous
Sous pouvwaBattery Powered (Allspark Tech cube)
Kalite batri sipòteLithium-polymer (in Allspark Tech cube)
Asanble obligatwaNon
Mòd operasyonManyèl
Dèyè view of the Autobot Sqweeks figure, showing the back panel details.

Imaj 8.1: Dèyè view of the Autobot Sqweeks figure.

9. Garanti ak sipò

This product is sold without a manufacturer's warranty. For any product-related inquiries or support, please contact Hasbro customer service directly. Refer to the packaging for contact information or visit the official Hasbro websit.

© 2024 Transformers. All Rights Reserved. Hasbro and all related characters are trademarks of Hasbro.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.