Entwodiksyon
This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.
Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Karakteristik pwodwi
- Kalite konektè: 2.4G receiver antenna with IPEX 4 Generation connector.
- Longè: 5.9 inches (150mm) total length.
- Materyèl: RF113 Silver plated Wire Material for enhanced signal transmission.
- Pèfòmans: Precision machining ensures low loss signal stability and high sensitivity.
- Konpatibilite: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.
Kontni pake
The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.
Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.
Enstalasyon ak Enstalasyon
- Idantifye kalite konektè a: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
- Konekte ak reseptè a: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
- Plasman antèn: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
- Secure Antenna: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.
Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.
Enstriksyon Operasyon
Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.
Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.
Antretyen
- Enspeksyon regilye: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
- Lapwòpte: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
- Depo: When not in use, store the antennas in a dry, cool place, protected from physical damage.
- Ranplasman: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.
Depanaj
- Problem: Poor Signal / Frequent Failsafes
-
- Tcheke Koneksyon: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
- Plasman antèn: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
- Domaj Antèn: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
- Receiver Issues: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
- Problem: Antenna Does Not Fit
-
- Verifye Kalite Konektè a: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.
Espesifikasyon
| Paramèt | Valè |
|---|---|
| Nimewo Modèl | 43234-1976 |
| Kalite antèn | 2.4G Receiver Antenna |
| Kalite Connector | IPEX 4 Generation |
| Longè | 150mm (5.9 pous) |
| Materyèl fil | RF113 Silver plated |
| Enpedans | 50 Ohm |
| Gamme frekans | 2400 - 2500 MHz |
| SWR | <= 2.0 |
| Genyen | 2 |
| Tanperati operasyon | -40 °C a +65 °C |
| Tanperati Depo | -40 °C a +80 °C |
| Item Weight (per antenna) | Approximately 0.5g (as shown in product images) |
Image: The 150mm length of the antenna measured against a ruler.
Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.
Videyo pwodwi ofisyèl la
Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)
Garanti ak sipò
For warranty information and technical support, please refer to the official iFlight websit la oubyen kontakte sèvis kliyan yo dirèkteman. Tèm garanti espesifik yo ka varye selon rejyon an ak détayan an.