VITEK VT-1607 ST-I

VITEK VT-1607 ST-I 500 Watt Centrifugal Juicer Instruction Manual

Model: VT-1607 ST-I

Entwodiksyon

Thank you for choosing the VITEK VT-1607 ST-I Centrifugal Juicer. This appliance is designed to efficiently extract juice from various fruits and vegetables, providing fresh and healthy beverages. Please read this manual carefully before operating the juicer to ensure safe and proper use, and retain it for future reference.

Enfòmasyon enpòtan sou sekirite

Toujou swiv prekosyon sekirite debaz yo lè w ap itilize aparèy elektrik pou diminye risk dife, chòk elektrik ak aksidan pèsonèl.

  • Li tout enstriksyon anvan ou itilize.
  • Asire voltage endike sou aparèy la koresponn ak volim lokal outage anvan konekte.
  • Pa plonje inite motè a, kòd la, oswa ploge a nan dlo oswa lòt likid.
  • Debranche aparèy la nan priz la lè w pa ap itilize l, anvan w monte oswa demonte pyès, epi anvan w netwaye l.
  • Avoid contact with moving parts. Ensure the appliance is properly assembled before operation.
  • Pa opere nenpòt aparèy ki gen yon kòd oswa ploge ki domaje, oswa apre aparèy la fonksyone mal oswa li te domaje nan nenpòt fason.
  • Pa sèvi ak deyò.
  • Keep hands and utensils away from the feed chute during operation to prevent injury.
  • Always use the food pusher provided. Never push food with your fingers or other objects.
  • Ensure the safety locking arm is securely in place before operating the juicer.
  • Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te ba yo sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo.

Pwodwi konpozan

Familiarize yourself with the parts of your VITEK VT-1607 ST-I Centrifugal Juicer.

VITEK VT-1607 ST-I Centrifugal Juicer assembled

Figure 1: Fully assembled VITEK VT-1607 ST-I Centrifugal Juicer with juice cup and pulp container.

  • Inite motè: The base of the juicer containing the motor and control knob.
  • Chute manje: Opening where fruits and vegetables are inserted.
  • Moun k ap pouse manje: Used to guide food down the feed chute.
  • Kouvèti/Kouvèti: Transparent cover that secures the feed chute and directs juice.
  • Stainless Steel Grater cum Filter: The central component that grates and separates juice from pulp.
    Close-up of the VITEK juicer's stainless steel grater cum filter

    Figi 2: Detaye view of the high-grade stainless steel grater cum filter.

  • Kontenè pou fè kaka: Collects the separated pulp. Capacity: 1.5 liters.
  • Juice Cup with Foam Separator: Collects the extracted juice. Capacity: 800 ml. Features a lid cover and partition for uniform juice pouring and foam separation.
    VITEK juicer with separate juice cup and pulp container

    Figure 3: Separate containers for juice and pulp, including the 800ml juice cup.

  • Anti-drip System: Prevents juice from dripping after extraction.
    Close-up of the VITEK juicer's anti-drip spout

    Figure 4: The anti-drip system prevents spills and keeps your counter clean.

  • Safety Locking Arm: Secures the lid and ensures the juicer operates only when correctly assembled.

Enstalasyon ak Asanble

Before first use, wash all detachable parts (lid, filter, pulp container, juice cup, food pusher) in warm soapy water, rinse thoroughly, and dry.

  1. Mete inite motè a sou yon sifas ki estab, plat epi sèk.
  2. Insert the pulp container into its designated position on the motor unit.
  3. Carefully place the stainless steel grater cum filter onto the motor unit's shaft, ensuring it is seated firmly.
  4. Position the juicer cover/lid over the filter and pulp container, aligning it correctly with the motor unit.
  5. Engage the safety locking arm by lifting it and securing it into the grooves on the lid. The juicer will not operate unless the locking arm is correctly engaged.
  6. Mete gode ji a anba ji a.
  7. Mete pouse manje a nan chute manje a.

Enstriksyon Operasyon

Follow these steps to extract juice efficiently.

  1. Ensure the juicer is properly assembled and the safety locking arm is secured.
  2. Wash fruits and vegetables thoroughly. For larger items, cut them into pieces that fit the feed chute. Remove hard pits from fruits like peaches or plums. Peeling is generally not necessary for most fruits and vegetables, but you may peel citrus fruits.
  3. Mete gode ji a anba ji a.
  4. Ploge fil elektrik la nan yon priz elektrik apwopriye.
  5. Turn the control knob to the desired speed setting:
    • Vitès 1 (Ba): Suitable for soft fruits and vegetables (e.g., tomatoes, grapes, berries).
    • Vitès 2 (Anwo): Suitable for hard fruits and vegetables (e.g., carrots, apples, celery).
  6. Once the motor is running, gradually feed the prepared fruits and vegetables into the feed chute using the food pusher. Apply gentle, even pressure. Do not force food into the chute.
  7. The juice will flow into the juice cup, and the pulp will collect in the pulp container. The unique juice jar is equipped with a foam separator for clearer juice.
  8. When finished juicing, turn the control knob to the "OFF" position and unplug the appliance from the power outlet.
  9. Activate the anti-drip system by pushing the spout upwards to prevent any remaining juice from dripping.

Antretyen ak netwayaj

Netwayaj regilye asire lonjevite ak fonksyònman ijyenik ji ou a.

  1. Toujou debranche ji a nan priz kouran anvan ou netwaye li.
  2. Demonte ji a lè w lage l.asing the safety locking arm, removing the lid, filter, pulp container, and juice cup.
  3. Rinse all detachable parts immediately after use under running water to prevent pulp from drying and sticking.
  4. Wash the detachable parts (lid, filter, pulp container, juice cup, food pusher) in warm, soapy water. Use a brush to clean the fine mesh of the stainless steel filter thoroughly.
  5. Note: The product is NOT dishwasher safe. Please wash all parts by hand.
  6. Siye inite motè a ak anonsamp twal. Pa janm plonje inite motè a nan dlo oswa nan okenn lòt likid.
  7. Seche tout pati yo byen anvan ou remonte oswa estoke.

Depanaj

Si ou rankontre pwoblèm ak ji ou a, gade pwoblèm ak solisyon komen sa yo.

  • Ji a pa limen:
    • Tcheke si kòd elektrik la byen konekte nan priz la.
    • Ensure the safety locking arm is fully engaged and locked into position. The juicer has a safety mechanism that prevents operation if not properly assembled.
  • Ti rannman ji oswa twòp kaka:
    • Ensure you are using the correct speed setting for the type of fruit or vegetable. Use higher speed for harder produce.
    • Feed produce slowly and apply gentle, even pressure with the food pusher.
    • The filter may be clogged. Clean the stainless steel filter thoroughly.
  • Ji a sispann pandan l ap fonksyone:
    • The juicer may have overheated due to continuous use or overloading. Turn off the juicer, unplug it, and allow it to cool down for at least 30 minutes before resuming.
    • Check for blockages in the feed chute or filter. Clear any obstructions.
  • Twòp vibrasyon oswa bri:
    • Ensure all parts are correctly assembled and securely locked.
    • Check if the juicer is placed on a stable, flat surface.

Si pwoblèm nan pèsiste, tanpri kontakte sèvis kliyan.

Espesifikasyon

MakVITEK
ModèlVT-1607 ST-I
Maksimòm pouvwa500 Watts
Kalite sous pouvwaFil elektrik
Kalite kontwolèBouton
MateryèlNerjaveèi asye
Fini KaliteNerjaveèi asye
Juice Cup Capacity800 mililit
Kapasite veso kaka1.5 lit
Pwa atik2.75 Kilogram
Karakteristik espesyalHigh Grade Stainless Steel grater cum filter, Unique 800ml juice jar with lid and foam separator, Stainless steel body, Anti-drip system, Detachable parts for easy cleaning, Safety lock.
Dishwasher SafeNon
Konpozan ki enkliJuicer, Accessories, User manual with Warranty Card

Garanti ak sipò pou kliyan

Your VITEK VT-1607 ST-I Centrifugal Juicer comes with a manufacturer's warranty and dedicated customer support.

  • Garanti: 2-year warranty provided by the manufacturer from the date of purchase. Please retain your purchase receipt for warranty claims.
  • Swen Kliyan: For any queries, service requests, or support, please contact VITEK customer care.
  • Manifakti / Importateur: SPG INDIA PVT LTD., Gala No. F 105 & 106, Gundavli, Krishna Complex, Bhiwandi.
VITEK Customer Support Contact Information

Figure 5: VITEK Customer Support details for after-sales service.

© 2026 VITEK. Tout dwa rezève.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.