VOX BC108 Black Cab Series Amplifier kabinè

1. Entwodiksyon

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

Figi 1: Devan view of the VOX BC108 Amplifier Cabinet.

2. Prekosyon sekirite

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

• Sous pouvwa: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
• Vantilasyon: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
• Dlo ak imidite: Do not expose the unit to rain, moisture, or excessive humidity. Do not place objects filled with liquids on or near the unit.
• Chalè: Kenbe aparèy la lwen sous chalè tankou radyatè, recho, oswa lòt aparèy ki pwodui chalè.
• Netwayaj: Netwaye sèlman ak yon twal sèk. Pa sèvi ak pwodui netwayaj likid oswa pwodui netwayaj ayewosòl.
• Sèvis: Pa eseye fè sèvis pwodui sa a tèt ou. Refere tout sèvis yo bay pèsonèl sèvis kalifye.
• Plasman: Place the cabinet on a stable, level surface to prevent it from falling.
• Kab Oratè: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• VOX BC108 Amplifier kabinè
• Speaker Cable (may vary by region/retailer)
• Manyèl Enstriksyon (dokiman sa a)

4. Enstalasyon

Follow these steps to set up your VOX BC108 amplifier cabinet:

1. Plasman: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
2. Konekte ak yon Amplifier Head:

   Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

   

   Figure 2: The BC108 cabinet paired with an MV50 amplifier tèt.

   

   Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

3. Matche enpedans: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your amplifier.
4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. Operasyon

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected amplifier tèt.

• Limen/Etenyen: Limen ou amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
• Kontwòl Volim: Adjust the volume and tone settings directly on your amplifier tèt.
• Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your amplifier.


Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. Antretyen

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

• Netwayaj: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Depo: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• Enspeksyon: Periodically check speaker cables for any signs of wear or damage. Replace damaged cables immediately.

NAN. Depanaj

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. Espesifikasyon

9. Enfòmasyon sou Garanti

The VOX BC108 Amplifier Cabinet comes with a 1-ane garanti limite from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX websit.

10. Sipò pou Kliyan

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

• Websit: Visit the official VOX websit pou FAQ, resous sipò, ak enfòmasyon pou kontakte yo.
• Kontakte: Refer to the contact section on the VOX websit pou nimewo telefòn oswa sipò pa imèl.
• Machann: Contact your authorized VOX dealer for local support and service options.