somfy 1001814

Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V Motor Instruction Manual

1. Entwodiksyon

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V motor. Please read these instructions carefully before proceeding with any installation or operation. Retain this manual for future reference.

2. Enfòmasyon sou Sekirite

  • Ensure all electrical connections are performed by a qualified electrician and comply with local electrical codes.
  • Dekonekte kouran an anvan ou fè nenpòt pwosedi antretyen oswa enstalasyon.
  • Do not allow children to operate the motor or controls.
  • Kenbe men ak rad ki lach lwen pati k ap deplase yo pandan w ap opere.
  • This motor is designed for specific applications. Do not use it for purposes other than those specified by Somfy.

3. Pwodwi souview

The Somfy LT50 506S2 Sonesse motor is a tubular motor designed for various applications requiring precise and quiet operation, such as motorized blinds, shades, or projection screens. It operates at 120V and provides 6Nm of torque at 32 RPM.

Somfy LT50 506S2 Sonesse Motor

Figi 3.1: Jeneral view of the Somfy LT50 506S2 Sonesse Motor.

Motor end cap detail

Figure 3.2: Detail of the motor's end cap, showing the output shaft connection point.

Motor with drive and mounting components

Figure 3.3: The motor shown with typical drive and mounting components (accessories not included).

4. Enstalasyon ak Enstalasyon

Installation of the Somfy LT50 506S2 Sonesse motor requires careful attention to detail and adherence to electrical safety standards. It is recommended that installation be performed by a professional installer.

4.1 Konpozan ki nesesè yo (pa enkli)

Please note that essential accessories such as the crown, drive, and mounting plate are not included with the motor and must be acquired separately to complete the installation.

4.2 Koneksyon elektrik

The motor includes a power cord for connection to a 120V power supply. Ensure the power supply is disconnected before making any connections. Follow the wiring diagram provided with your specific application or consult a qualified electrician.

4.3 Montaj

Mount the motor securely within its intended housing or bracket. Ensure the motor is level and properly aligned with the driven component (e.g., shade tube). Refer to the specific mounting instructions for your application.

4.4 Limit Setting

After physical installation and electrical connection, the motor's upper and lower travel limits must be set. Consult the specific instructions for your control system (e.g., remote control, wall switch) to program these limits accurately.

5. Operasyon Enstriksyon

Once installed and limits are set, the motor can be operated using a compatible Somfy control device (e.g., remote, wall switch, smart home system). Refer to your control device's manual for specific operating procedures.

  • Up/Open: Press the 'Up' or 'Open' button to raise the blind/shade or open the screen.
  • Down/Close: Press the 'Down' or 'Close' button to lower the blind/shade or close the screen.
  • Stop/My: Press the 'Stop' or 'My' button to halt the motor at any desired position. The 'My' button can also be programmed for a favorite intermediate position.

6. Antretyen

The Somfy LT50 506S2 Sonesse motor is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

  • Netwayaj: Keep the motor area clean and free from dust and debris. Do not use abrasive cleaners or solvents.
  • Enspeksyon: Periodically inspect the power cord for any signs of damage. Ensure all mounting hardware remains secure.
  • Lubrifikasyon: The motor is factory-lubricated and does not require additional lubrication.

NAN. Depanaj

If you encounter issues with your motor, refer to the following common troubleshooting steps:

PwoblèmKòz posibSolisyon
Motè pa reponnPa gen ekipman pou pouvwa
Faulty control device
Pwoteksyon surcharge motè aktive
Tcheke koneksyon kouran an ak disjonktè a
Test with another control device if available
Allow motor to cool down (if it has been running continuously)
Motor runs but blind/shade does not moveDrive or crown not properly engaged
Obstruction
Verify proper installation of drive and crown
Check for any physical obstructions
Motor stops prematurely or limits are incorrectLimits incorrectly setRefer to your control device manual to reset the motor limits

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan Somfy oubyen yon teknisyen kalifye.

8. Espesifikasyon

SpesifikasyonValè
MakSomfy
Nimewo Modèl1001814
Vitès32 RPM
Voltage120 Volts
ManifaktiSOMFY
UPC685248788080
ASINB01N7NITLC
GTIN685248788080

9. Enfòmasyon sou Garanti

The Somfy LT50 506S2 Sonesse motor comes with a 5-ane garanti. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Somfy websit oswa kontakte sipò kliyan.

10. Sipò

For further assistance, technical support, or to inquire about accessories, please visit the official Somfy websit la oubyen kontakte depatman sèvis kliyan yo. Ou ka jwenn enfòmasyon kontak sou Magazen Somfy sou Amazon or directly on the manufacturer's websit.

© 2026 Somfy. Tout dwa rezève.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.