Lenco LS-50WD Turntable Instruction Manual

Entwodiksyon

The Lenco LS-50WD is a modern turntable designed for playing vinyl records. It features two built-in speakers, allowing for immediate audio playback without external equipment. The turntable supports multiple playback speeds (33, 45, and 78 RPM) to accommodate various record types. For enhanced audio, an RCA output is provided for connection to external speakers or an amplifier. Additionally, a USB port enables the conversion of vinyl records into digital formats for archiving or playback on other devices.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Lenco LS-50WD turntable. Please read it thoroughly before using the device to ensure proper function and longevity.

Enstriksyon Sekirite

• Li tout enstriksyon ak anpil atansyon anvan ou itilize.
• Kenbe manyèl sa a pou referans nan lavni.
• Pa ekspoze aparèy la anba lapli oswa imidite pou evite dife oswa chòk elektrik.
• Asire w adaptè kouran an konpatib ak ekipman pou kouran lokal ou a.
• Pa bloke ouvèti vantilasyon.
• Mete inite a sou yon sifas ki estab ak nivo.
• Evite mete inite a toupre sous chalè oswa limyè solèy la dirèk.
• Deploge inite a pandan tanpèt zèklè oswa lè li pa itilize pou yon tan long.
• Pa eseye fè antretyen aparèy la tèt ou. Konfye tout antretyen bay pèsonèl kalifye.

Kontni pake

Verifye ke tout atik ki nan lis anba yo enkli nan pake a:

• Lenco LS-50WD Turntable Unit
• Kouvèti Pousyè
• 45 rpm adaptè
• DC pouvwa adaptè
• Manyèl Enstriksyon (dokiman sa a)

Pwodwi souview

Familiarize yourself with the components of your Lenco LS-50WD turntable.

Figi 1: Devan view of the Lenco LS-50WD turntable with the dust cover open, showing the platter, tonearm, and controls.

Figi 2: Fèmen view of the tonearm assembly, including the stylus and counterweight adjustment area.

Figi 3: Rear panel showing the RCA audio output (L/R), USB port, DC 12V power input, and power ON/OFF switch.

Figi 4: Plis paseview of the Lenco LS-50WD highlighting key features: 2 built-in speakers, 33/45/78 RPM speeds, auto-stop function, RCA output, and PC connection via USB.

Enstalasyon

1. Debake: Carefully remove the turntable and all accessories from the packaging. Retain the packaging for future transport or storage.
2. Plasman: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
3. Enstalasyon Kouvèti Pousyè: Attach the provided dust cover to the hinges at the rear of the turntable. This protects the platter and stylus from dust when not in use.
4. Koneksyon pouvwa: Connect the DC power adapter to the DC 12V input port on the rear of the turntable (refer to Figure 3). Plug the adapter into a suitable wall outlet.
5. Koneksyon Oratè Ekstèn (Si ou vle): If you wish to use external speakers, connect an RCA audio cable (not included) from the RCA L/R output ports on the rear of the turntable (refer to Figure 3) to the corresponding audio input on your amplifier oswa moun ki pale aktif.
6. Ajisteman kontrepwa: The turntable features an adjustable counterweight. This allows for fine-tuning of the stylus pressure for optimal sound quality and to prevent damage to your records. Consult the specific instructions for your cartridge type for the recommended tracking force. Generally, you will balance the tonearm until it floats freely, then rotate the counterweight to the recommended tracking force.

Enstriksyon Operasyon

1. Pouvwa sou: Flip the power switch on the rear panel to the 'ON' position (refer to Figure 3).
2. Plasman Rekò: Place a vinyl record onto the turntable platter. If playing a 7-inch single, place the 45 RPM adapter onto the spindle first.
3. Seleksyon vitès: Select the appropriate playback speed (33, 45, or 78 RPM) using the speed selector switch, usually located near the platter. Ensure the selected speed matches the record you are playing.
4. Kòmanse Lekti:
   • Leve bra a dousman avèk levye repèkaj la.
   • Move the tonearm over the desired starting groove of the record.
   • Slowly lower the tonearm using the cueing lever. The stylus will make contact with the record, and playback will begin.
5. Ajisteman Volim: Adjust the volume using the volume knob on the turntable or your connected external audio system.
6. Fonksyon Auto-Stop: The LS-50WD features an auto-stop function that automatically stops the platter rotation when the tonearm reaches the end of a record. This helps prevent unnecessary wear on the stylus and record.
7. Sispann Lekti:
   • Leve bra ton an avèk levye repèkaj la.
   • Return the tonearm to its rest position.
   • Lower the cueing lever to secure the tonearm.
8. USB Recording (Digitization):
   • Connect the turntable's USB port (refer to Figure 3) to your computer using a USB cable (not included).
   • Install appropriate audio recording software on your computer (e.g., Audacity, available online).
   • Follow the software's instructions to select the turntable as the input device and begin recording your vinyl playback.
9. Pouvwa Off: When finished, flip the power switch on the rear panel to the 'OFF' position.

Antretyen

• Netwaye inite a: Wipe the turntable's surface with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• Kouvèti pousyè: Clean the dust cover with a soft, damp cloth. Avoid harsh chemicals that may scratch or cloud the plastic.
• Swen Stylus: The stylus (needle) is a delicate component. Clean it periodically using a soft brush designed for stylus cleaning, brushing gently from back to front. Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).
• Swen Dosye: Keep your records clean and free of dust to prolong their life and the life of your stylus. Store records vertically in their sleeves.

Depanaj

Espesifikasyon

Remak: Espesifikasyon yo ka chanje san avètisman.

Garanti ak sipò

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Lenco websit la. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.

If you encounter issues not covered in the troubleshooting section, please contact Lenco customer support for assistance.