Nutone 763N BROAN-NUTONE Ventilation Fan with Light User Manual

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Nutone 763N BROAN-NUTONE Ventilation Fan with Light. This unit is designed to provide efficient ventilation and bright illumination in one integrated system, ensuring a comfortable and well-lit environment.

The Nutone 763N features quiet operation, an attractive grille, and a plug-in motor and light for ease of use and maintenance. Please read this manual thoroughly before installation and operation to ensure safe and proper use of the product.

Enfòmasyon sou Sekirite

AVÈTISMAN: Pou diminye risk pou dife, chòk elektrik, oswa blesi sou moun, obsève sa ki annapre yo:

• Toujou dekonekte kouran an nan panèl sèvis la anvan ou fè antretyen oswa netwaye aparèy la.
• Travay enstalasyon ak fil elektrik dwe fèt pa moun ki kalifye (yo) an akò ak tout kòd aplikab ak estanda, ki gen ladan kòd konstriksyon dife-rated ak estanda.
• Sèvi ak inite sa a sèlman nan fason manifakti a te prevwa l. Si w gen kesyon, kontakte manifakti a.
• This unit is suitable for use over a tub or shower enclosure when installed in a GFCI protected branch circuit.
• Do not use with solid state speed controls.
• Pa pou itilize nan kwizin.
• Kalite IC pou itilize ak izolasyon tèmik.

Pwodwi souview

The Nutone 763N combines a ventilation fan and an incandescent light in a single, compact unit. Key features include:

• Vantilasyon efikas: Provides 50 CFM (Cubic Feet per Minute) air delivery to effectively remove moisture and odors.
• Operasyon trankil: Engineered for a sound level of 2.5 Sones, ensuring minimal noise disruption.
• Ekleraj entegre: Features a translucent white polymeric lens for diffused light, using one (1) 100W maximum A19 incandescent bulb (bulb not included).
• Kontwòl separe: Fan and light can be operated independently or together, depending on your needs.
• Konstriksyon dirab: Housing made of galvanized steel with a white polymeric grille.

Figi 1: Angle view of the Nutone 763N Ventilation Fan with Light, showing the white grille and translucent light cover.

Figi 2: Anwo-anba view of the Nutone 763N, highlighting the square light and surrounding ventilation grilles.

Enstalasyon ak Enstalasyon

Installation instructions are included with each unit. A mounting flange is provided for secure installation. Ensure all local electrical codes and safety regulations are followed during installation.

Lis Verifikasyon Pre-Enstalasyon:

• Verify power is disconnected at the service panel.
• Ensure the installation location is suitable (e.g., not in kitchens, suitable for GFCI protected circuits over tubs/showers).
• Confirm duct size is 4 inches in diameter for proper connection.
• Prepare necessary tools and materials (e.g., wiring, fasteners, screwdriver).

Etap enstalasyon:

1. Carefully unpack the unit and inspect for any damage.
2. Position the housing (8¼" x 8" x 5¾") in the desired ceiling location, utilizing the provided mounting flange for secure attachment.
3. Connect the 4-inch diameter ductwork to the fan's duct connector.
4. Perform electrical wiring connections according to local codes. The unit operates on 120 VAC, 60 Hz, 1.6 A. Ensure a GFCI protected branch circuit if installing over a tub or shower.
5. Install one (1) 100W maximum A19 incandescent bulb (not included) into the lamp priz.
6. Attach the white polymeric grille (12" x 10¾") and translucent white polymeric lens to the housing.
7. Restore power at the service panel and test the fan and light functions.

Figi 3: Side view illustrating the 4-inch duct connection point on the fan housing.

Enstriksyon Operasyon

The Nutone 763N Ventilation Fan with Light is designed for straightforward operation. The fan and light functions can be controlled independently or simultaneously, depending on your wiring setup and switch configuration.

• Operasyon Fan: Activate the fan using the designated wall switch. The fan will begin to draw air, removing moisture and odors from the room.
• Limyè operasyon: Activate the light using its dedicated wall switch. The incandescent bulb will provide illumination through the diffused lens.
• Combined Operation: If wired to a single switch or a dual-function switch, both the fan and light can be turned on or off together.

For optimal performance, it is recommended to operate the fan during and after activities that generate moisture, such as showering, to prevent humidity buildup and potential mildew growth.

Figure 4: The Nutone 763N fan and light unit seamlessly installed in a bathroom ceiling, providing both ventilation and overhead lighting.

Antretyen

Regular maintenance will ensure the longevity and efficient operation of your Nutone 763N unit. Always disconnect power at the service panel before performing any maintenance.

Cleaning the Grille and Lens:

• Rale griy la dousman desann pou detache li nan bwat la.
• Remove the translucent lens.
• Wash the grille and lens with mild soap and water. Rinse thoroughly and dry completely before reattaching.

Cleaning the Blower Wheel:

• With the grille removed, carefully wipe down the one-piece molded polymeric blower wheel with a damp twal.
• Evite itilize pwodui netwayaj abrazif oswa solvang.

Ranplasman anpoul:

• Asire w ke pouvwa a koupe.
• Remove the grille and lens.
• Carefully unscrew the old A19 incandescent bulb.
• Screw in a new 100W maximum A19 incandescent bulb.
• Reattach the lens and grille.

Depanaj

Espesifikasyon

Garanti ak sipò

For specific warranty information and details regarding your Nutone 763N Ventilation Fan with Light, please refer to the warranty card included with your product packaging or visit the official Nutone websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.

If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Nutone Customer Service. Contact information can typically be found on the product packaging or the official Nutone websit.