BONTEC Single Arm Monitor Mount User Manual

1. Entwodiksyon

Thank you for choosing the BONTEC Single Arm Monitor Mount. This product is designed to enhance your workspace by providing a stable, adjustable, and ergonomic solution for your monitor. It helps free up valuable desk space and allows for flexible screen positioning to reduce neck and back strain.

2. Enfòmasyon sou Sekirite

Li tout enstriksyon yo ak anpil atansyon anvan asanble ak itilize.
Ensure your monitor's weight and VESA pattern are within the specified limits (max 10 kg, VESA 75x75mm or 100x100mm).
Do not overtighten screws, as this may cause damage.
Kenbe ti pati yo lwen timoun yo.
Si nenpòt pati ki manke oswa ki domaje, kontakte sipò kliyan imedyatman.

3. Pake kontni

Tanpri verifye ke tout konpozan yo prezan anvan ou kòmanse asanblaj la:

Asanble Bra Monitè a
Biwo Clamp Eleman
Grommet Base Component
Materyèl pou monte (vis, rondelle, espasè)
Allen Keys (Hex Wrenches)
Klip Jesyon Kab
Manyèl Enstriksyon

4. Enstalasyon ak Enstalasyon

The BONTEC monitor mount offers two primary installation methods: Desk Clamp and Grommet Base. Choose the method that best suits your desk setup.

4.1. Desk Clamp Enstalasyon

This method is suitable for desk thicknesses between 10mm and 85mm.

Tache C-cl laamp to the edge of your desk. Ensure the clamp is securely tightened to provide maximum stability.
Insert the main pole into the clamp baz la epi fikse l ak vis ki vini ak li a.
Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

4.2. Enstalasyon Baz Grommet la

This method is suitable for desks with a pre-existing bolt hole (diameter 10mm to 85mm) and desk thicknesses between 10mm and 80mm.

Demonte C-cl laamp to use the grommet base components.
Insert the grommet bolt through the desk hole.
Secure the grommet base from underneath the desk using the provided washer and nut.
Insert the main pole into the grommet base and secure it.
Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

Two installation methods: Desk Clamp and Grommet Base — Figure 1: Illustration of the two available installation methods: Desk Clamp and Grommet Base. The Desk Clamp supports desk thicknesses from 10mm to 85mm. The Grommet Base supports desk thicknesses from 10mm to 80mm with a hole diameter from 10mm to 85mm.

4.3. Konekte Monitè a

This mount is compatible with monitors between 13 and 32 inches, with VESA mounting patterns of 75x75mm or 100x100mm, and weighing up to 10 kg.

Carefully align your monitor's VESA holes with the mounting plate on the arm.
Secure the monitor to the plate using the appropriate screws provided. Ensure they are tightened firmly but do not overtighten.

Monitor mounted on the BONTEC arm, showing screen size compatibility and weight capacity — Figure 2: A monitor securely mounted on the BONTEC arm, demonstrating compatibility with screens from 13 to 32 inches and a maximum capacity of 10 kg. The image also highlights VESA compatibility for 75x75mm and 100x100mm patterns.

5. Enstriksyon Operasyon ak Ajisteman

The BONTEC monitor mount offers a range of adjustments for optimal viewing konfò.

5.1. Ajisteman Wotè

To adjust the monitor's height, loosen the screw on the pole collar, slide the arm to the desired position, and then re-tighten the screw firmly.

Adjustable height feature of the monitor arm, showing a range of 430mm — Figure 3: The monitor arm's adjustable height feature, illustrating the vertical movement range of up to 430mm along the main pole.

5.2. Ajisteman Panche

The monitor can be tilted up or down to reduce glare and optimize viewing angles. Loosen the tilt screw on the VESA plate, adjust the angle, and then re-tighten.

Full motion adjustment showing tilt and rotation capabilities — Figure 4: Demonstrates the full motion adjustment capabilities, including a tilt range of ±90° and 360° rotation for portrait or landscape orientation.

5.3. Pivote ak Wotasyon

The arm allows for 180-degree swivel at multiple joints, and the VESA plate can rotate 360 degrees, enabling easy switching between landscape and portrait orientations.

Angle adjustment illustration showing 180 degree swivel at arm joints — Figure 5: An illustration detailing the angle adjustment, showing the arm's ability to swivel 180° at its joints for flexible positioning.

5.4. Jesyon kab

Utilize the integrated cable management clips along the arm to route and organize your power and AV cables, keeping your workspace neat and clutter-free.

Multiple features including integrated cable management and Allen key storage — Figure 6: Highlights multiple features of the monitor arm, including the integrated cable management system to keep wires organized and a convenient storage slot for the included Allen keys on the main pole.

6. Antretyen

Tcheke tout vis ak koneksyon yo regilyèman pou asire yo rete sere epi byen fèm.
Netwaye montaj la ak yon twal mou.amp twal. Evite pwodui netwayaj abrazif oswa solvan.
Do not lubricate any parts of the mount unless specifically instructed.

NAN. Depanaj

Pwoblèm	Kòz posib	Solisyon
Monitor is wobbly or unstable.	Mounting screws are loose; desk clamp/grommet base is not tight enough; monitor weight exceeds limit.	Ensure all screws are tightened. Re-tighten the desk clamp or grommet base. Verify monitor weight is within 10 kg.
Difficulty adjusting arm movement.	Jwenti yo twò sere.	Use the provided Allen keys to slightly loosen the screws at the arm joints until desired movement is achieved.
VESA plate does not align with monitor holes.	Incorrect VESA pattern; plate installed backward.	Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the VESA plate is oriented correctly as per instructions.

8. Espesifikasyon

Mak: BONTEC
Koulè: Nwa
Aparèy konpatib: Monitors (LCD, LED)
Konpatibilite gwosè ekran: 13-32 inches (33-81cm diagonal)
VESA konpatibilite: 75x75mm, 100x100mm
Kalite montaj: Desk Mount (Clamp oswa Grommet)
Karakteristik espesyal: Adjustable (Height, Tilt, Swivel, Rotation)
Materyèl: Alloy Steel
Dimansyon atik (L x W x H): 39 x 7.5 x 43 santimèt
Limit pwa: 10 Kilogram
Nivo rezistans dlo: Pa reziste dlo

9. Garanti ak sipò

BONTEC is committed to providing high-quality products and excellent customer service. This product is backed by technical support to assist you with any questions or concerns you may have during assembly or use.

For technical assistance or warranty inquiries, please refer to the contact information provided with your purchase or visit the official BONTEC websit.