PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.

2. Pwodwi souview

The IGSW-24040T is an IP30-rated industrial managed Ethernet switch designed for robust network environments. It features 24 10/100/1000Base-T ports and 4 shared 1000Base-S/LX SFP slots, offering high port density and Gigabit fiber link capabilities. This switch supports advanced Layer 2 to Layer 4 data switching, redundancy protocols like ERPS Ring, IEEE 1588v2 Transparency, and Modbus TCP. It is engineered for stable operation in wide temperature ranges (-40 to 75°C) and includes redundant AC and DC power supply options for enhanced reliability.

3. Pake kontni

Please verify the contents of your IGSW-24040T package. If any items are missing or damaged, contact your vendor immediately.

• PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch
• Kòd kouran (AC)
• Terminal Block Connector (for DC power)
• Twous pou monte etajè
• Gid Enstalasyon Rapid
• Resource CD or Link to Online Documentation

4. Deskripsyon Fizik

4.1 Panèl devan

The front panel of the IGSW-24040T switch provides all network connectivity ports and status indicators.

An image showing the front panel of the PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch, featuring 24 Ethernet ports, 4 SFP/TP combo ports, and power input connectors.

• Pò Ethernet (1-24): 24 10/100/1000Base-T RJ45 ports for connecting network devices.
• Pò Konbine (25-28): 4 shared 100/1000Base-X SFP slots or 10/100/1000Base-T RJ45 ports. These ports can operate as either SFP fiber ports or copper Ethernet ports, but not simultaneously.
• Endikatè ki ap dirije: Bay enfòmasyon sou sitiyasyon pouvwa, sistèm, ak aktivite pò.

4.2 Panèl dèyè

The rear panel houses the power input connectors and grounding screw.

• AC pouvwa Antre: Connector for the 100~240V AC power supply.
• Antre pouvwa DC: Terminal block connector for the 36~72V DC power supply, supporting redundant power.
• Vis Terre: For connecting the chassis to earth ground.

5. Enstalasyon

5.1 Enstalasyon

The IGSW-24040T is designed for rack-mounting in a standard 19-inch equipment rack. Ensure adequate ventilation around the unit to prevent overheating.

1. Attach the provided rack-mounting brackets to the sides of the switch using the included screws.
2. Secure the switch into the 19-inch rack using appropriate rack screws.
3. Connect the grounding screw on the rear panel to a reliable earth ground using a grounding wire.

5.2 Koneksyon pouvwa

The IGSW-24040T supports redundant power inputs (AC and DC) for enhanced reliability.

1. AC pouvwa: Connect the AC power cord to the AC power input on the rear panel and then to a standard AC power outlet (100~240V AC).
2. DC pouvwa: Connect the DC power source (36~72V DC) to the terminal block connector on the rear panel, ensuring correct polarity. Secure the wires firmly.
3. For redundant operation, connect both AC and DC power sources. The switch will automatically switch to the available power source if one fails.

5.3 Rezo Koneksyon

Connect your network devices to the switch ports.

1. Aparèy Ethernet: Use standard RJ45 Ethernet cables to connect computers, servers, or other network devices to the 10/100/1000Base-T ports (1-24).
2. Fiber Optic Devices: Insert compatible SFP modules into the SFP slots of the combo ports (25-28). Connect fiber optic cables from your fiber network devices to the SFP modules. Ensure that if an SFP module is used in a combo port, the corresponding RJ45 port is not used.

6. Itilizasyon switch la

6.1 Konfigirasyon debaz

The IGSW-24040T is a managed switch, offering various configuration options via a web-based interface, console port, or SNMP.

• Aksè Inisyal: Refer to the Quick Installation Guide for the default IP address and login credentials to access the web koòdone jesyon.
• Konfigirasyon adrès IP: Configure the switch's IP address to match your network subnet.
• Chanjman modpas: For security, change the default administrator password immediately after initial login.

6.2 Karakteristik avanse

The IGSW-24040T supports a range of advanced features for industrial network optimization and control.

• Layer 2/4 Management: Utilize VLANs, Link Aggregation, Spanning Tree Protocol (STP), and other Layer 2 features for network segmentation and redundancy.
• Modbus TCP: Integrate the switch into industrial control systems using Modbus TCP for monitoring and management.
• ERPS Ring: Implement Ethernet Ring Protection Switching for rapid network recovery in ring topologies.
• IEEE 1588v2 Transparency: Support for precise time synchronization in industrial automation applications.
• Kalite Sèvis (QoS): Prioritize critical network traffic to ensure consistent performance for sensitive applications.
• Network Access Control: Implement security policies to control access to the network.
• DIDO (Digital Input/Digital Output): Utilize DIDO functions for external event triggering and alarm notifications.

7. Antretyen

Regular maintenance helps ensure the longevity and optimal performance of your IGSW-24040T switch.

• Kontwòl anviwònman: Asire w ke anviwònman operasyon an rete nan limit tanperati ak imidite espesifye yo.
• Netwayaj: Netwaye deyò switch la detanzantan avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl. Asire w ke ouvèti vantilasyon yo pa gen pousyè ak obstak.
• Mizajou mikrolojisyèl: Check the PLANET TECHNOLOGY websit pou dènye mizajou firmwèr yo. Aplike mizajou yo ka amelyore pèfòmans, ajoute fonksyonalite, epi adrese vilnerabilite sekirite yo.
• Sovgad Konfigirasyon: Regularly back up the switch's configuration settings to an external device.

NAN. Depanaj

This section provides solutions to common issues you might encounter with the IGSW-24040T switch.

• Pa gen pouvwa:
  • Verify that the power cord(s) are securely connected to the switch and the power source.
  • Check the power outlet or DC power supply for functionality.
  • Ensure the power LED on the front panel is illuminated.
• Pa gen lyen sou pò a:
  • Check the Ethernet cable connection between the switch and the connected device.
  • Asire w ke aparèy ki konekte a limen epi li fonksyone byen.
  • For SFP ports, verify the SFP module is correctly inserted and compatible, and the fiber cable is intact.
  • Check the link/activity LED for the specific port.
• Pa Ka Aksè Web Entèfas:
  • Asire w ke adrès IP òdinatè w la nan menm sou-rezo ak adrès IP switch la.
  • Verify physical network connectivity to the switch.
  • Eseye fè yon ping sou adrès IP switch la.
  • If the IP address is unknown or forgotten, you may need to reset the switch to factory defaults (refer to the full user manual for this procedure).

9. Espesifikasyon

10. Garanti ak sipò

For warranty information, technical support, and service inquiries, please refer to the documentation included with your product or visit the official PLANET TECHNOLOGY websit la. Kenbe resi acha ou a pou validasyon garanti a.