Instapark PWT-07 Digital Programmable Water Timer User Manual

Entwodiksyon

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Instapark PWT-07 Digital Programmable Water Timer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Enfòmasyon sou Sekirite

• Use only 1.5V AA alkaline batteries. Do not mix old and new batteries, or different battery types.
• Ensure the battery compartment is securely closed to maintain the IP66 waterproof rating.
• Do not expose the timer to extreme temperatures or direct sunlight for prolonged periods, which may affect battery life and device performance.
• Disconnect the timer from the faucet and drain it before freezing temperatures to prevent damage.
• This device is designed for outdoor use with standard ¾” (GHS) threaded faucets.

Kontni pake

Verifye ke tout atik yo prezan nan pakè a:

• Instapark PWT-07 Water Timer
• Manyèl Itilizatè (dokiman sa a)
• Kat Garanti

Note: 2 AA alkaline batteries are required and not included.

Karakteristik pwodwi

• Single-station digital programmable faucet water timer.
• Impulse solenoid valve for reliable operation.
• Compatible with standard ¾” (GHS) threaded outdoor hose faucets.
• User-friendly interface with a single oversized rotary dial and 4 pushbuttons.
• Large, easy-to-read LCD display (2.1” x 1”).
• Endis rezistans dlo: IP66.
• Built-in rain delay function (24, 48, or 72 hours).
• Manual watering option without interrupting programmed schedules.
• Detachable battery compartment for easy battery replacement.
• Low power consumption, up to 4,000 on/off cycles per battery set.

Enstalasyon

1. Enstalasyon batri

The Instapark PWT-07 requires two (2) 1.5V AA alkaline batteries (not included).

1. Jwenn konpatiman pil la sou dèyè revèy la.
2. Slide the battery compartment cover downwards to open.
3. Mete de nouvo pil alkalin AA yo, asire polarite ki kòrèk la (+/-).
4. Glise kouvèti konpatiman batri a tounen nan plas li jiskaske li fè yon klik byen fèm.
5. The LCD display should illuminate, indicating successful battery installation. If the display shows a low battery indicator, remove the batteries, wait for the screen to go completely dark, then reinsert them.

Figi 1: Konpatiman batri a san kouvèti a.

2. Enstalasyon revèy la

Attach the timer to your outdoor faucet:

1. Asire w ke wobinèt la pwòp epi li pa gen debri.
2. Screw the timer's inlet (top connector) onto a standard ¾” (GHS) outdoor hose faucet. Hand-tighten only to prevent damage. Do not overtighten.
3. Connect your garden hose or irrigation system to the timer's outlet (bottom connector). Hand-tighten securely.
4. Turn on the faucet fully. The timer is designed to operate under pressure.

Figure 2: Instapark PWT-07 mounted on a faucet.

Enstriksyon Operasyon

The timer features a large rotary dial and four buttons: SET, +, -, ak MANYÈL.

Figure 3: Control panel and LCD display.

1. Mete lè aktyèl la

1. Vire kadran rotary a Mete revèy.
2. Sèvi ak la + epi - buttons to adjust the current hour. Press SET pou konfime.
3. Sèvi ak la + epi - buttons to adjust the current minute. Press SET pou konfime.

2. Programming Watering Schedule

The timer allows you to set a start time, duration, and frequency for watering.

Mete lè pou kòmanse:

1. Vire kadran rotary a KÒMANSE TAN.
2. Sèvi ak la + epi - buttons to set the desired watering start hour. Press SET pou konfime.
3. Sèvi ak la + epi - buttons to set the desired watering start minute. Press SET pou konfime.

Fikse konbyen tan (dire):

1. Vire kadran rotary a KONBYEN TAN.
2. Sèvi ak la + epi - buttons to set the watering duration (from 5 seconds to 360 minutes). Press SET pou konfime.

Fikse konbyen fwa (Frekans):

1. Vire kadran rotary a Konbyen fwa.
2. Sèvi ak la + epi - buttons to select the watering frequency (e.g., every 10 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes, 1 hour, 2 hours, 4 hours, 12 hours, 1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days). Press SET pou konfime.

After setting all parameters, turn the rotary dial to KOURI to activate the programmed schedule.

3. Awozaj Manyèl

Pou wouze manyèlman san afekte orè pwograme ou a:

1. Asire w ke kadran an mete sou KOURI or OFF.
2. Peze a MANYÈL bouton. Ekran an ap montre yon dire awozaj manyèl pa defo.
3. Sèvi ak la + epi - buttons to adjust the desired manual watering duration.
4. Peze SET to start manual watering. The timer will run for the selected duration and then automatically shut off.
5. To stop manual watering prematurely, press the MANYÈL bouton ankò.

4. Fonksyon reta lapli

The rain delay function allows you to pause your watering schedule for a set period without losing your program settings.

1. Asire w ke kadran an mete sou KOURI.
2. Peze epi kenbe la - button for 3 seconds. The display will show "DELAY" and a default delay duration.
3. Sèvi ak la + epi - bouton yo pou chwazi yon dire reta 24, 48, oswa 72 èdtan.
4. Peze SET to activate the rain delay. The timer will resume its programmed schedule after the delay period ends.
5. To cancel the rain delay, press and hold the - bouton ankò pou 3 segonn.

Antretyen

• Ranplasman batri: Replace batteries when the low battery indicator appears on the LCD. Always use new AA alkaline batteries.
• Netwayaj: Siye revèy la ak anonsamp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Winterization: Before the first frost, disconnect the timer from the faucet. Remove the batteries and store the timer indoors in a dry, frost-free location. Failure to do so may result in damage from freezing water.
• Filtre ekran: Periodically check the filter screen inside the inlet connector for debris. Clean if necessary to ensure proper water flow.

Depanaj

Espesifikasyon

Garanti ak sipò

The Instapark PWT-07 Digital Programmable Water Timer is backed by a standard 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Instapark customer service. Please have your purchase receipt and product model number (PWT-07) available when contacting support.

Contact information for Instapark customer service can typically be found on the manufacturer's websit la oswa dokiman acha ou a.