Universal Office Chair Assembly Manual

1. Enfòmasyon enpòtan sou sekirite

Tanpri li tout enstriksyon yo ak anpil atansyon anvan ou monte epi itilize li. Kenbe manyèl sa a pou referans pita.

• Asire w tout pyès yo la epi yo pa domaje anvan w kòmanse asanblaj la. Pa sèvi ak li si gen pyès ki manke oswa ki domaje.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Do not overtighten screws during assembly, as this may damage the components.
• Kenbe timoun ak bèt kay lwen zòn asanblaj la. Ti pyès yo ka yon danje toufe.
• Only use the chair for its intended purpose.
• Pa kanpe sou chèz la.

2. Pake kontni

Verify that all components listed below are included in your package.

3. Enstriksyon Asanble

Follow these steps carefully to assemble your office chair.

1. Mete wou yo nan baz zetwal la: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Mete asansè gaz la: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Kole plak mekanis lan sou chèz la: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Mete akoudwa yo nan chèz la: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Konekte Asanblaj Syèj la ak Asansè Gaz la: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Operasyon Enstriksyon

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Ajisteman wotè: Pou leve chèz la, leve levye ki sitiye anba bò dwat chèz la pandan w ap retire pwa w sou chèz la. Pou bese chèz la, leve levye a pandan w chita. Lage levye a nan wotè ou vle a.
• Bloke/Debloke Panche: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Tansyon enklinezon: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Antretyen

Regular maintenance will prolong the life of your office chair.

• Netwayaj: Siye sifas yo ak yon mou, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Tcheke Fastener: Tcheke tout vis ak boulon yo detanzantan pou asire yo byen sere. Sere boulon yo ankò si sa nesesè.
• Netwayaj wou: Retire tout cheve oswa debri ki ka akimile ozalantou wou yo pou asire yon mouvman san pwoblèm.
• Lubrifikasyon: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

NAN. Depanaj

Gade seksyon sa a pou solisyon pou pwoblèm komen yo.

7. Espesifikasyon

Key technical details of your office chair.