Bobcat S130 Skid Steer Loader Workshop Repair Manual

1. Entwodiksyon

This workshop repair manual provides detailed service and maintenance procedures for the Bobcat S130 Skid Steer Loader. It is an essential resource for technicians and owners performing repairs, diagnostics, and routine maintenance.

This manual specifically covers the following Bobcat S130 Serial Numbers:

• S/N 5246 11001 & ABOVE
• S/N 5247 11001 & ABOVE

The manual's part number is 6902680 and contains 636 pages of detailed information.

2. Enfòmasyon sou Sekirite

Always prioritize safety when working on the Bobcat S130. Failure to follow safety precautions can result in serious injury or death. Read and understand all safety warnings and instructions before performing any service or maintenance.

• Ekipman Pwoteksyon Pèsonèl (PPE): Always wear appropriate PPE, including safety glasses, gloves, and protective footwear.
• Bloke/Tag Soti: Ensure the machine is properly shut down, parked on a level surface, and all systems are de-energized before beginning work. Use lock-out/tag-out procedures to prevent accidental startup.
• Hydraulic System Safety: Hydraulic fluid is under high pressure. Relieve all hydraulic pressure before disconnecting lines or components.
• Leve ak Sipò: Use approved lifting equipment and stands to safely support the machine when working underneath it.
• Sekirite batri: Disconnect the battery before working on electrical components. Be aware of potential hazards from battery acid and explosive gases.
• Prevansyon dife: Keep fire extinguishers readily available. Be cautious when working with fuels, lubricants, and other flammable materials.

WARNING: Always refer to the specific safety decals on your Bobcat S130 machine for additional warnings and instructions.

3. Pwodwi souview

The Bobcat S130 is a compact and versatile skid steer loader designed for various construction, landscaping, and agricultural tasks. Known for its maneuverability and power, the S130 is a reliable machine requiring proper maintenance and service to ensure optimal performance and longevity.

Figure 3.1: Cover of the Bobcat S130 Workshop Repair Manual. This image depicts the front cover of the comprehensive service manual, indicating its purpose for detailed repair and maintenance procedures for the Bobcat S130 Skid Steer Loader.

Key components include the engine, hydraulic system, drive system, and various attachments. This manual provides detailed instructions for servicing each of these systems.

4. Preparing for Service

Before commencing any service or repair work on the Bobcat S130, proper preparation is crucial to ensure safety and efficiency.

1. Pake sou yon tè plat: Always park the skid steer on a firm, level surface.
2. Lower Lift Arms: Lower the lift arms and tilt the bucket or attachment forward until it rests on the ground.
3. Shut Down Engine: Turn off the engine and remove the key from the ignition.
4. Angaje fren pakin: Asire w ke fren pakin la angaje.
5. Soulaje presyon: Cycle all hydraulic controls to relieve residual pressure in the hydraulic system.
6. Dekonekte batri: For electrical work, disconnect the negative battery cable first, then the positive.
7. Netwaye Zòn Travay: Ensure the work area around the machine is clean and free of obstructions.
8. Rasanble zouti: Collect all necessary tools, diagnostic equipment, and replacement parts before starting.

5. Post-Service Operation and Diagnostics

This section outlines procedures for operating the Bobcat S130 specifically for diagnostic purposes or after completing service and repairs. It is not a substitute for the operator's manual.

5.1. Initial Startup After Service

• Nivo likid: Verify all fluid levels (engine oil, hydraulic fluid, coolant) are at their correct marks.
• Koneksyon: Check all hoses, wires, and fasteners for proper connection and tightness.
• Clearance: Ensure no tools or debris are left on or in the machine.
• Kòmanse motè: Start the engine and allow it to warm up. Observe for any unusual noises, leaks, or warning lights.

5.2. Functional Checks

Perform functional checks in a safe, open area:

• Steering and Drive: Test forward, reverse, and turning capabilities.
• Lift and Tilt: Operate the lift arms and bucket/attachment through their full range of motion.
• Auxiliary Hydraulics: If applicable, test auxiliary hydraulic functions.
• Fren: Verify parking brake and service brake functionality.

If any issues are detected during these checks, refer to the troubleshooting section or the relevant repair procedures within this manual.

6. Antretyen

Regular maintenance is critical for the longevity and reliable operation of your Bobcat S130. This section outlines key maintenance tasks and recommended intervals.

6.1. Daily/Every 10 Hours

• Tcheke nivo lwil motè a.
• Tcheke nivo likid idwolik la.
• Inspect tires for damage and proper inflation.
• Check coolant level.
• Clean debris from radiator and oil cooler.
• Inspect safety interlocks and seat belt.

6.2. Every 50 Hours/Weekly

• Lubrifye tout pwen grès yo.
• Check battery electrolyte level and terminals.
• Inspect drive chains and adjust tension if necessary.
• Check fan belt tension.

6.3. Every 250 Hours/Monthly

• Chanje lwil motè ak filtre.
• Ranplase filtè gaz.
• Inspect air filter and replace if necessary.
• Check hydraulic filter and replace if necessary.
• Inspect all hoses and lines for leaks or damage.

Note: Always use genuine Bobcat parts and recommended fluids for optimal performance and to maintain warranty coverage.

NAN. Depanaj

This section provides a guide to diagnosing common issues that may arise with your Bobcat S130. For complex problems, consult an authorized Bobcat service technician.

8. Espesifikasyon

Below are general specifications for the Bobcat S130 Skid Steer Loader. Refer to your machine's specific data plate for exact figures, as specifications can vary by model year and configuration.

• Modèl: S130 Skid Steer Loader
• Motè: Diesel (specific model varies)
• Pwa opere: Apeprè 5,000 - 5,500 liv (2,268 - 2,495 kg)
• Rated Operating Capacity: Apeprè 1,300 lbs (590 kg)
• Tipping Load: Apeprè 2,600 lbs (1,179 kg)
• Leve Wotè: Approximately 114.5 inches (2908 mm) to hinge pin
• Kapasite tank gaz: Approximately 17.5 US gallons (66.2 L)
• Hydraulic System Capacity: Approximately 10.5 US gallons (39.7 L)
• Sistèm kondwi: Idwostatik
• Nimewo Seri ki Kouvri: S/N 5246 11001 & ABOVE, S/N 5247 11001 & ABOVE
• Nimewo Manyèl Pati: 6902680

9. Garanti ak sipò

This workshop repair manual is a guide for service and maintenance. For information regarding your Bobcat S130's warranty, please refer to the original purchase documentation or contact your authorized Bobcat dealer.

For technical support, genuine Bobcat parts, or professional service, always contact an authorized Bobcat dealership. They have trained technicians and specialized tools to ensure your machine receives the best possible care.

You can find your nearest authorized Bobcat dealer by visiting the official Bobcat website or by consulting your local dealer directory.