BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Entwodiksyon

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Enfòmasyon sou Sekirite

Asire ke ekipman pou pouvwa a dekonekte anvan enstalasyon oswa antretyen.
This LED strip is designed for 12V DC power only. Connecting to a higher voltage pral domaje pwodwi a.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Kenbe soti nan atenn timoun yo.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Kontni pake

Verifye ke tout konpozan yo prezan epi yo an bon kondisyon:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Espesifikasyon

Mak	BTF-LIGHTING
Nimewo Modèl	56305MWW60W30
Ki ap dirije Kalite	SMD5630
Ki ap dirije Kantite	300 LED (60 LED/mèt)
Longè teren	16.4 pye (5 mèt)
FPCB Board Width	10mm
Koulè limyè	Blan cho
Tanperati Koulè	2700K-3000K
Lumen per LED	23-25 lm/LED
Travay Voltage	DC 12V
Adaptè pouvwa rekòmande	DC 12V 3A (36W) or higher
Wattage	30 Watts
Nivo ki enpèmeyab	IP30 (Non-Waterproof)
Tanperati Fonksyònman	-20 ° C a 50 ° C
Viv lavi	> 50,000 èdtan
Sètifikasyon	CE & RoHS

Enstriksyon Enstalasyon

Prepare sifas la: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Imaj: Gwo plan view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
Mezire epi koupe (Si ou vle): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Konekte pouvwa:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Konfòme teren an: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Enstriksyon Operasyon

Once the LED strip is properly installed and connected to a 12V DC power supply:

Limen/Etenyen: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Imaj: Egzanp vizyèlamples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Antretyen

Netwayaj: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Enspeksyon: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Depo: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Depanaj

Pwoblèm	Kòz posib	Solisyon
Bann LED la pa limen.	Pa gen kouran nan adaptè a. Incorrect power connection (polarity reversed). Adaptè pouvwa defo. Damaged LED strip. Remote control battery dead or not paired (if applicable).	Check wall outlet and power adapter connection. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Part of the LED strip is not lighting up.	Damage to a section of the strip. Incorrect cutting.	Inspect the unlit section for physical damage or a broken circuit. Asire w ke koupe yo te fèt sèlman nan mak ki te deziyen yo. Seksyon ki domaje yo pa ka repare.
LEDs are dim or flickering.	Ensifizan ekipman pou pouvwa. Koneksyon ki lach.	Ensure the power adapter provides sufficient wattage (minimum 30W for this strip). Tcheke tout koneksyon yo pou wè si yo byen anfòm.

Garanti ak sipò

BTF-LIGHTING products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING websit.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30