Entwodiksyon
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Micro MMD007 Deluxe Mini Scooter. Please read this manual thoroughly before first use and retain it for future reference. The Micro MMD007 Deluxe Mini Scooter is designed for children aged 3 years and up, with a maximum load capacity of 35 kg. It features a telescopic handlebar for adjustable height.
Enfòmasyon sou Sekirite
Avètisman: Always wear a helmet and protective gear (wrist guards, elbow pads, knee pads) when riding the scooter. Adult supervision is required at all times.
- Ensure all locking mechanisms are securely fastened before each use.
- Do not ride on public roads, uneven surfaces, or near traffic.
- Avoid riding in wet conditions, at dusk, or at night.
- Scooter la fèt pou yon sèl kavalye sèlman.
- Regularly check for loose parts, wear, or damage. Do not use if damaged.
- Familiarize yourself with the braking mechanism before riding.

Enstalasyon
The Micro MMD007 Deluxe Mini Scooter requires minimal assembly.
- Handlebar Insertion: Insert the handlebar stem into the opening on the scooter deck until it clicks securely into place. Ensure the locking mechanism is engaged.
- Ajisteman Wotè Guidon: The telescopic handlebar can be adjusted to suit the rider's height.
- Jwenn kle deblokaj rapid laamp sou tij gidon an.
- Louvri cl laamp, adjust the handlebar to the desired height (between 48 cm and 64 cm), and then securely close the clamp.
- Ensure the handlebar is firmly locked and does not move up or down.
- Verifikasyon Anvan Wout la: Before the first ride, and before every subsequent ride, verify that all components are securely attached and in good working order. Check the wheels, brakes, and handlebar for any looseness or damage.

Enstriksyon Operasyon
The Micro MMD007 Deluxe Mini Scooter is designed for intuitive riding.
- Kòmanse: Place one foot on the scooter deck and use the other foot to push off the ground.
- Direction: The scooter uses a lean-to-steer mechanism. To turn, lean your body in the desired direction. The handlebar will follow your lean.
- Frenaj: The scooter is equipped with a rear brake. To slow down or stop, gently press your foot down on the brake pedal located above the rear wheel. Apply pressure gradually to avoid sudden stops.
- Sispann: Once stopped, place both feet on the ground.

Antretyen
Antretyen regilye asire lonjevite ak operasyon an sekirite nan scooter ou a.
- Netwayaj: Siye scooter a pwòp ak piblisiteamp cloth after use. Avoid using harsh chemicals or abrasive cleaners. Do not hose down or immerse the scooter in water.
- Enspeksyon wou: Periodically check the wheels for wear and tear. Ensure they spin freely and are not obstructed by debris.
- Tcheke fren: Verify that the rear brake functions effectively. The brake should engage smoothly and stop the scooter efficiently.
- Tcheke Fastener: Regularly inspect all screws, bolts, and clamps to ensure they are tight. Tighten any loose fasteners as needed.
- Depo: Sere scooter a nan yon kote ki sèk, lwen limyè solèy dirèk ak tanperati ekstrèm, pou anpeche materyèl la degrade.

Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Gidon an lach oswa li pa ka fè anyen. | Quick-liberasyon clamp not fully tightened or handlebar not fully inserted. | Ensure the handlebar stem is fully inserted until it clicks. Tighten the quick-release clamp an sekirite. |
| Scooter does not steer smoothly. | Debris in steering mechanism or worn components. | Inspect the steering mechanism for any obstructions. Clean if necessary. If the issue persists, contact customer support. |
| Fren an pa efikas. | Worn brake pad or debris. | Check the brake pad for wear. Clean any debris from the brake area. If the brake pad is worn, it may need replacement. |
| Wou yo pa vire lib. | Debris in wheel bearings or tight axles. | Remove any visible debris from around the wheels and axles. Ensure axle bolts are not overtightened. |
Espesifikasyon
- Modèl: MMD007
- Mak: Mikwo
- Ranje laj: 3 ane ak plis
- Kapasite maksimòm chaj: 35 kg
- Wotè gidon: Reglabl soti nan 48 cm rive nan 64 cm
- Kalite fren: Fren dèyè
- Materyèl ankadreman: Metal
- Materyèl wou: Plastik
- Kantite wou: 3
- Dimansyon pwodwi: Apeprè 60.96 x 15.24 x 27.94 cm (L x W x H)
- Pwa atik: Apeprè 1.95 kg
- Karakteristik espesyal: Foldable, Lightweight
Garanti ak sipò
For information regarding warranty coverage, replacement parts, or customer support, please refer to the official Micro Mobility Systems websit la oubyen kontakte détayan lokal ou a. Kenbe prèv acha ou pou reklamasyon garanti.