Technaxx Midi Security Kit PRO FullHD 1080P TX-51 Instruction Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Technaxx Midi Security Kit PRO FullHD 1080P TX-51. This comprehensive surveillance system includes a 4-channel receiver and two 1080p HD-CVI cameras designed for both indoor and outdoor use. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.

Imaj 1.1: Plis paseview of the Technaxx Midi Security Kit PRO system, featuring the central receiver unit, a bullet-style camera, and a dome-style camera, illustrating typical indoor and outdoor installation scenarios.

2. Pake kontni

Carefully unpack the box and ensure all items listed below are present and in good condition. If any items are missing or damaged, please contact your retailer.

• 1x Technaxx Midi Security Kit PRO Receiver (DVR)
• 1x Technaxx FullHD 1080P Bullet Camera
• 1x Technaxx FullHD 1080P Dome Camera
• 2x Camera Power Adapters
• 1x Receiver Power Adapter
• 2x Video Cables (BNC)
• 1x USB sourit
• Materyèl pou monte (vis, ploge miray)
• Manyèl itilizatè sa a

Image 2.1: The retail packaging for the Technaxx Midi Security Kit PRO, displaying the included receiver and two camera types.

3. Pwodwi souview

3.1 Receiver (DVR)

The receiver is the central unit for recording, managing, and viewing footage from your security cameras. It features multiple input/output ports for connectivity.

Imaj 3.1.1: Devan view of the Technaxx receiver unit, showing its compact, white design.

Receiver Rear Panel Connections:

• DC IN: Power input for the receiver.
• Pò VGA: Konekte ak yon monitè pou yon pwodiksyon videyo.
• HDMI Port: Connect to an HD monitor or TV for video and audio output.
• Pò USB (x2): For connecting a USB mouse, external storage, or for firmware updates.
• Pò LAN (Etènèt): Connect to your network router for remote access and internet features.
• VIDEO IN (BNC x4): Connect the BNC cables from your cameras. This model supports up to 4 cameras.

Image 3.1.2: Receiver rear panel with DC power, VGA, HDMI, and USB ports.

Image 3.1.3: Receiver rear panel with Ethernet and USB ports.

Image 3.1.4: Receiver rear panel with four BNC video input ports.

3.2 Kamera

The kit includes two types of 1080p FullHD cameras: a bullet camera and a dome camera. Both are designed for high-definition surveillance and are water-resistant for outdoor use.

Kamera bal:

The bullet camera is typically used for directional surveillance and is suitable for outdoor mounting due to its robust, water-resistant design.

Image 3.2.1: Technaxx bullet camera, showing its design and mounting base.

Imaj 3.2.2: Detaye view of the bullet camera lens, highlighting the infrared LEDs for night vision.

Dome Kamera:

The dome camera offers a discreet design and is often used for wider area coverage, suitable for both indoor and outdoor environments.

Image 3.2.3: Technaxx dome camera, showcasing its compact, hemispherical design.

Imaj 3.2.4: Detaye view of the dome camera lens, including its infrared emitters and sensor.

4. Enstalasyon

4.1 Enstalasyon Kamera

1. Chwazi Kote: Select appropriate locations for your cameras. The bullet camera is ideal for outdoor perimeter surveillance, while the dome camera can be used indoors or outdoors for broader coverage. Ensure the chosen location provides a clear field of view and is within reach of power outlets and video cable length.
2. Monte Kamera yo: Use the provided mounting hardware to securely attach the cameras to a wall or ceiling. Drill pilot holes if necessary. Adjust the camera angle for optimal viewing.
3. Konekte pouvwa: Connect each camera to its respective power adapter and plug the adapter into a power outlet.

Imaj 4.1.1: Egzanpample of a bullet camera installed on an exterior wall for outdoor surveillance.

4.2 Koneksyon reseptè

1. Connect Cameras to Receiver: Connect the BNC video cables from each camera to the 'VIDEO IN' ports on the rear of the receiver.
2. Konekte Monitè a: Connect a monitor to the receiver using either an HDMI or VGA cable. HDMI is recommended for optimal video quality.
3. Konekte Sourit USB a: Plug the included USB mouse into one of the USB ports on the receiver for navigation.
4. Koneksyon Rezo (Si ou vle): Pou aleka viewing and network features, connect an Ethernet cable from the receiver's LAN port to your internet router.
5. Pouvwa sou: Connect the receiver's power adapter to the 'DC IN' port and then plug it into a power outlet. The system will power on automatically.

4.3 Inisyal Konfigirasyon

Upon first boot, the system will guide you through an initial setup wizard. Follow the on-screen prompts to:

• Set language and time zone.
• Create an administrator password.
• Configure network settings (if connected via Ethernet).
• Format the internal storage (if a hard drive is installed).

5. Opere

5.1 Viv View

After initial setup, the system will display the live feed from all connected cameras on your monitor. You can switch between single-camera view ak griy milti-kamera view using the on-screen controls or the USB mouse.

5.2 Anrejistreman

The system supports continuous recording by default. You can configure various recording settings via the main menu:

• Anrejistreman Orè: Fikse lè espesifik pou anrejistreman.
• Deteksyon Mouvman: Configure cameras to record only when motion is detected in their field of view. Adjust sensitivity and detection zones.
• Anrejistreman Alam: Trigger recording based on external alarm inputs (if connected).

5.3 Lektur

Pou review anrejistre footage:

1. Access the 'Playback' menu from the main interface.
2. Select the desired date and time.
3. Choose the camera channel you wish to view.
4. Sèvi ak kontwòl lekti yo (jwe, poz, avanse rapid, rembobine) pou navige nan jwèt la.tage.

5.4 Remote Access (P2P)

If the receiver is connected to your network, you can access live view and playback remotely using a compatible mobile application. Refer to the on-screen menu for QR codes or instructions to download and configure the app. Ensure your router's network settings allow for P2P connections if necessary.

6. Antretyen

• Netwayaj Kamera yo: Netwaye lantiy kamera yo detanzantan avèk yon savon mou,amp twal pou asire yon imaj klè. Evite pwodui netwayaj abrazif.
• Tcheke Koneksyon: Regularly inspect all cable connections (power, video, network) to ensure they are secure and free from damage.
• Mizajou mikrolojisyèl: Check the Technaxx website for any available firmware updates for your receiver. Updates can improve performance and add new features. Follow the instructions provided with the update carefully.
• Jesyon Depo: The system supports up to 4TB of storage. Ensure there is sufficient space for recordings. Older footage may be overwritten automatically based on your settings. Consider backing up important footage to an external USB drive.

NAN. Depanaj

7.1 No Video Signal on Monitor

• Ensure the monitor is powered on and set to the correct input source (HDMI/VGA).
• Check the HDMI/VGA cable connection between the receiver and the monitor.
• Verify the receiver is powered on (check power adapter and power outlet).

7.2 No Camera Image

• Check if the camera's power adapter is properly connected and receiving power.
• Ensure the BNC video cable from the camera is securely connected to the correct 'VIDEO IN' port on the receiver.
• Test the camera with a different video input port on the receiver, if available.

7.3 Cannot Access Remotely

• Verify the receiver's LAN port is connected to your router with an active Ethernet cable.
• Check the network settings on the receiver to ensure it has a valid IP address.
• Asire w aparèy mobil ou a gen yon koneksyon entènèt aktif.
• Confirm the remote access application is correctly configured with the receiver's details.

7.4 Pwoblèm Anrejistreman

• Check if a hard drive is installed and properly formatted within the receiver.
• Verify the recording schedule and motion detection settings are correctly configured.
• Ensure there is sufficient storage space available on the hard drive.

8. Espesifikasyon

9. Enfòmasyon sou Sekirite

• Pa ekspoze reseptè a ak lapli oswa imidite.
• Asire bon vantilasyon pou reseptè a pou anpeche surchof.
• Sèvi ak adaptè kouran yo bay la sèlman.
• Avoid placing the cameras in direct sunlight for extended periods, as this may affect image quality and lifespan.
• Pa eseye demonte oswa repare aparèy la tèt ou. Konfye tout antretyen bay pèsonèl kalifye.
• Kenbe soti nan atenn timoun yo.

10. Garanti ak sipò

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Technaxx websit la. Ou kapab kontakte tou kote ou te achte a pou jwenn asistans.