M-Wave M30HCW Bicycle Computer

1. Entwodiksyon

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasing konsepsyon kontra enfòmèl ant li yo ak ekran klè li yo.

2. Enfòmasyon sou Sekirite

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Kenbe pil yo pa rive jwenn timoun yo. Si vale, chèche swen medikal imedya.
• Dispose of batteries according to local regulations. Do not incinerate.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Rou Magnet
• Mounting Bracket (for handlebar or stem)
• Mounting Ties/Bands
• CR2 Batteries (4 required, included)

4. Enstalasyon

4.1. Enstalasyon batri

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Fèmen konpatiman batri yo byen.

4.2. Enstalasyon Sikloòdinatè a

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewing.
2. Glise inite sikloòdinatè a sou sipò montaj la jiskaske li fè yon klik an plas.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Inisyal Konfigirasyon

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Inite: Select between metric (km/h, km) and imperial (mph, miles) units.
• Gwosè wou: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• Tan: Mete lè aktyèl la (fòma 24 èdtan oswa 12 èdtan).
• Pwa: Enter your body weight for calorie calculation.

5. Operasyon Enstriksyon

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Fonksyon debaz yo

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Vitès aktyèl la: Montre vitès monte bisiklèt ou an tan reyèl.
• Mwayèn vitès: Shows the average speed for your current ride.
• Vitès maksimòm: Anrejistre vitès ki pi wo a pandan woulib ou a.
• Distans vwayaj: Measures the distance covered in the current ride.
• Odomèt: Tracks the total accumulated distance.
• Tan woulib: Records the duration of your current ride.
• Kadans: Measures your pedaling revolutions per minute (RPM).
• Altimètr: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Konsomasyon kalori: Estimates calories burned based on ride data and user weight.
• Tèmomèt: Montre tanperati anbyen.

5.2. Operasyon bouton

Typically, the computer will have one or two buttons for navigation and selection:

• Bouton MODE: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• SET bouton: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. Antretyen

• Netwayaj: Siye inite òdinatè a ak detèktè a ak yon twal mou.amp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Rezistans dlo: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Ranplasman batri: Replace batteries when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• Depo: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.