Thule TH8702

Manyèl Enstriksyon Thule TH8702 AirScreen Fairing Spoiler 112cm

Model: TH8702 | Brand: Thule

1. Entwodiksyon

This manual provides comprehensive instructions for the Thule TH8702 AirScreen Fairing Spoiler, a roof rack accessory designed to reduce wind noise and improve aerodynamics. It is compatible with Thule SquareBar, WingBar, and WingBar Edge roof rack systems.

The AirScreen features tool-free assembly and a new clamp system for secure attachment to your vehicle's roof bars. It is engineered to maintain T-track access on WingBar systems even when installed.

Nòt enpòtan:

While Thule WingBar and WingBar Edge systems are designed for excellent quietness, installing the AirScreen may, in some specific cases, lead to a slight increase in noise. This is due to the inherent aerodynamic properties of the fairing interacting with the already optimized bar profiles.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in property damage or personal injury.

  • Always ensure the AirScreen is securely attached to the roof bars before driving.
  • Regularly check all mounting hardware for tightness, especially after long trips or driving on rough roads.
  • Do not exceed the maximum load capacity of your roof rack system or vehicle. The AirScreen itself adds minimal weight but ensure overall system integrity.
  • Be aware of the increased height of your vehicle with the AirScreen installed, especially when entering garages or low-clearance areas.
  • Keep children away from the product during installation.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

  • Thule TH8702 AirScreen Fairing Spoiler (1 unit)
  • Monte Clamps and Hardware (specific to Thule bar types)
  • Manyèl Enstriksyon (dokiman sa a)
Thule TH8702 AirScreen Fairing Spoiler, angled view

Figi 1: Plis paseview of the Thule TH8702 AirScreen Fairing Spoiler. This image shows the fairing from an angled perspective, highlighting its curved design and the integrated mounting points.

4. Enstalasyon ak Enstalasyon

The Thule TH8702 AirScreen is designed for tool-free installation. Follow these steps to securely attach the fairing to your Thule roof bars.

4.1. Preparasyon

  1. Ensure your Thule roof rack system (SquareBar, WingBar, or WingBar Edge) is already correctly installed on your vehicle according to its specific instructions.
  2. Clean the area on the roof bars where the fairing will be mounted to ensure a secure grip.
  3. Depake tout konpozan yo epi verifye yo avèk lis sa ki nan pake a.

4.2. Attaching the Fairing

  1. Position the AirScreen fairing on the front roof bar. The curved side should face forward, and the Thule logo should be visible and correctly oriented.
  2. Align the fairing's mounting clamps with the front roof bar. The clamps are designed to fit snugly over the bar.
  3. Engage the new clamp system. For most Thule bars, this involves pressing the clamp mechanism firmly until it locks into place around the bar. Listen for a click to confirm secure engagement.
  4. Repeat for all mounting points along the fairing. Ensure each clamp is fully engaged and tight.
  5. Gently push and pull on the fairing to confirm it is securely attached and does not wobble. Adjust clamps si sa nesesè.
Thule TH8702 AirScreen Fairing Spoiler installed on a car roof rack

Figure 2: The Thule AirScreen Fairing Spoiler mounted on a vehicle's roof rack. This image illustrates the fairing's position relative to the roof bars and the vehicle's roof, showcasing pwofesyonèl aerodinamik li yofile.

Close-up of Thule AirScreen Fairing Spoiler clamping mekanis

Figi 3: Yon imaj detaye view nan cl laamping mechanism used to secure the Thule AirScreen to a roof bar. This close-up highlights the strap and buckle design for tool-free and secure attachment.

For WingBar systems, the design ensures that the T-track on the top of the bar remains accessible for other accessories even with the AirScreen installed.

5. Operasyon Enstriksyon

The Thule TH8702 AirScreen Fairing Spoiler operates passively by deflecting airflow over your roof rack system. Once correctly installed, it works to reduce wind noise and drag, contributing to a quieter and potentially more fuel-efficient driving experience.

No active operation is required after installation. However, regular checks as described in the Maintenance section are recommended.

6. Antretyen

To ensure the longevity and optimal performance of your Thule TH8702 AirScreen, follow these maintenance guidelines:

  • Netwayaj: Clean the fairing with mild soap and water. Avoid abrasive cleaners or solvents that could damage the material. Rinse thoroughly and dry with a soft cloth.
  • Enspeksyon: Periodically inspect the fairing and all mounting hardware for signs of wear, damage, or looseness. Pay close attention to the clamps and their connection points.
  • Verifikasyon sere: Re-check the tightness of all clamps regularly, especially before and after long journeys, or if you notice any unusual noise or movement from the fairing.
  • Depo: If removing the fairing for extended periods, store it in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.

NAN. Depanaj

If you encounter issues with your Thule TH8702 AirScreen, refer to the following troubleshooting tips:

  • Ogmantasyon Bri Van:
    • Ensure the fairing is installed correctly and all clamps yo konplètman sere boulon.
    • Verify the fairing's position on the front bar. Slight adjustments in position can sometimes affect noise levels.
    • As noted in the Introduction, some WingBar/WingBar Edge users might experience a slight noise increase due to specific aerodynamic interactions. This is generally minimal.
  • Fairing Feels Loose or Rattles:
    • Immediately pull over and re-check all mounting clamps. Ensure they are securely engaged and tightened.
    • Enspekte clamps for any damage or wear that might prevent a secure fit.
    • Confirm that the fairing is compatible with your specific Thule roof bar model.

8. Espesifikasyon

MakThule
Non modèlTH8702
Nimewo Modèl Pwodwi8702
Gwosè112 cm (44 pous)
Dimansyon pwodwi (L x W x H)112 x 15 x 15 cm
Pwa pwodwi839.15 g
KoulèNwa/Blan
UPC091021857568

9. Garanti ak sipò

For detailed warranty information, product registration, or technical support, please visit the official Thule website or contact Thule customer service directly. Contact details can typically be found on the Thule websit oswa anbalaj pwodwi a.

Kenbe resi acha ou a kòm prèv acha pou nenpòt reklamasyon garanti.

Pou plis enfòmasyon, vizite: www.thule.com

© 2023 Thule Group. Tout dwa rezève.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.