PeakTech 5086 Digital LED Lux Meter User Manual

1. Entwodiksyon ak souview

The PeakTech 5086 is a precise 3 3/4 digit (max. 3999) LCD digital LED Lux Meter designed for measuring the light intensity of various light sources, including LED, fluorescent, and traditional incandescent lamps with different light colors. It measures in Lux (lx), Footcandle (FC), or Candela (cd).

Unlike simpler lux meters that are typically calibrated for incandescent bulbs at 2856 K and provide inaccurate results for different color temperatures, the PeakTech 5086 allows for the adjustment of various light source factors. This enables accurate measurements for neon lamps, enkandesan lamps, red, blue, yellow LEDs, or daylight. The device features 10 freely adjustable correction factors for different light sources, 99 memory locations for measurement values, and useful measurement functions such as minimum, maximum, and average value tracking, as well as data hold. This makes it suitable for professional applications in occupational safety or lighting system evaluation.

Karakteristik kle:

• Measures light intensity in Lux (lx), Footcandle (FC), or Candela (cd).
• 10 freely adjustable light source factors for various lamp kalite.
• Suitable for colored light sources, LEDs, and other bulb types.
• Measurement refresh rate: approximately 2.5 times per second.
• External sensor with cosine angle correction.
• Data Hold, Minimum/Maximum/Average (AVG) measurement functions.
• Automatic range selection and zero adjustment.
• 99 memory locations for storing measurement values.

2. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou itilize aparèy la. Si ou pa swiv enstriksyon sa yo, ou ka blese oswa domaje aparèy la.

• Pa ekspoze aparèy la nan tanperati ekstrèm, imidite, oswa limyè solèy la dirèk.
• Evite gwo vibrasyon oswa enpak.
• Pa eseye ouvri oswa modifye aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
• Asire w ke pil yo byen mete nan plas yo. Retire pil yo si w pa pral itilize aparèy la pou yon bon bout tan.
• Keep the sensor clean and free from obstructions to ensure accurate readings.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo prezan nan pakè ou a:

• PeakTech 5086 Digital LED Lux Meter with external sensor
• Pote sak
• Batteries (pre-installed or included separately)
• Manyèl itilizatè

4. Layout aparèy

The PeakTech 5086 consists of a main unit with an LCD display and control buttons, and an external light sensor connected via a coiled cable. The sensor is equipped with a protective cap.

Figi 4.1: PeakTech 5086 Digital LED Lux Meter showing the main display unit and the external light sensor with its protective cap removed.

Kontwòl ak ekspozisyon:

• Ekspozisyon LCD: Shows measurement values, units (Lux, FC, Cd), battery status, and active functions (e.g., HOLD, MIN, MAX, AVG, Light Source factor).
• Bouton pouvwa (⏻): Limen oswa etenn aparèy la.
• LX/FC/CD Button: Toggles between Lux, Footcandle, and Candela measurement units.
• MEM/READ Button: Accesses memory functions to store or recall readings.
• HOLD/L.S. Button: Activates Data Hold function or enters Light Source factor adjustment mode.
• ZERO bouton: Performs zero adjustment for the sensor.
• Leve (▲) / Desann (▼) Bouton: Used for navigation and adjusting values in settings modes.

5. Enstalasyon

5.1 Enstalasyon batri

The PeakTech 5086 typically comes with batteries pre-installed. If not, or if batteries need replacement:

1. Jwenn kouvèti konpatiman batri a sou do inite prensipal la.
2. Open the cover by sliding or unscrewing it (refer to the diagram in the full manual if unsure).
3. Insert the required batteries (usually AAA or 9V, check the compartment for markings) ensuring correct polarity (+/-).
4. Fèmen kouvèti lòj batri a byen.

5.2 Konekte Capteur a

The external sensor is permanently attached via a coiled cable. Ensure the cable is not damaged or excessively stretched. The sensor head should be clean and the protective cap removed before taking measurements.

6. Operasyon Enstriksyon

6.1 Limen/Etenyen

• Peze bouton an pouvwa (⏻) to turn the device on. The display will illuminate and show a reading.
• Peze epi kenbe bouton pouvwa a (⏻) for a few seconds to turn the device off.

6.2 Unit Selection (Lux/FC/Cd)

• Peze a LX/FC/CD button to cycle through the available measurement units: Lux (lx), Footcandle (FC), and Candela (cd). The selected unit will be displayed on the LCD.

6.3 Ajisteman zewo

• Before taking measurements, especially in low light conditions, it is recommended to perform a zero adjustment.
• Place the protective cap over the sensor to block all light.
• Peze a ZERO button. The display should show "0" or a very small value.
• Remove the protective cap before measuring.

6.4 Setting Light Source Factors (L.S.)

The PeakTech 5086 allows for compensation of different light sources. There are 10 adjustable factors (L.S. 0 to L.S. 9).

1. Peze epi kenbe la HOLD/L.S. button until "L.S." appears on the display, indicating you are in Light Source factor adjustment mode.
2. Sèvi ak la Leve (▲) epi Desann (▼) buttons to select one of the 10 factor memory locations (L.S. 0 to L.S. 9).
3. Peze HOLD/L.S. again to enter the adjustment for the selected factor.
4. Sèvi ak la Leve (▲) epi Desann (▼) buttons to adjust the factor value. Consult the full manual or light source specifications for appropriate values.
5. Peze HOLD/L.S. to confirm the setting and exit the adjustment mode.

6.5 Fonksyon kenbe done

• Pandan yon mezi, peze la HOLD/L.S. button (short press) to freeze the current reading on the display. "HOLD" will appear.
• Peze HOLD/L.S. again to release the hold and resume live measurements.

6.6 Minimum, Maximum, and Average (AVG) Measurement

This function allows you to track the lowest, highest, and average light intensity over a measurement period.

1. Peze a MEM/LI button (short press) repeatedly to cycle through MIN, MAX, and AVG modes. The corresponding indicator will appear on the display.
2. In MIN mode, the display shows the lowest reading recorded since entering the mode.
3. In MAX mode, the display shows the highest reading recorded.
4. In AVG mode, the display shows the average reading.
5. To exit MIN/MAX/AVG mode, press the MEM/LI button until no indicator is shown, or turn the device off and on again.

6.7 Memory Functions (Store/Recall)

The device can store up to 99 measurement values.

Storing a Measurement:

1. With a live reading on the display, press and hold the MEM/LI button until "MEM" flashes and a memory location number appears.
2. Sèvi ak la Leve (▲) epi Desann (▼) buttons to select an empty memory location (or overwrite an existing one).
3. Peze MEM/LI again to store the value. The display will briefly confirm storage.

Recalling Stored Measurements:

1. Peze a MEM/LI button (short press) repeatedly until "READ" appears on the display.
2. Sèvi ak la Leve (▲) epi Desann (▼) buttons to scroll through the stored memory locations.
3. To exit recall mode, press MEM/LI until "READ" disappears, or turn the device off and on.

7. Antretyen

7.1 Netwayaj

• Wipe the device and sensor with a soft, dry cloth.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Keep the sensor's light-receiving surface clean and free of dust or fingerprints for accurate readings.

7.2 Ranplasman batri

Lè endikatè pil fèb la parèt sou ekran an, ranplase pil yo jan sa dekri nan Seksyon 5.1. Toujou itilize pil nèf nan kalite espesifye a.

7.3 Depo

• When not in use, store the device in its carrying bag with the sensor cap in place.
• Sere nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.
• Remove batteries if storing for an extended period to prevent leakage.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

PeakTech products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official PeakTech websit.

Information regarding spare parts availability and software updates is not explicitly provided in the product details. For technical support or service inquiries, please contact your local PeakTech distributor or customer service department.