Miele WMF111 WPS PWash 2.0 Front-load Washing Machine User Manual

1. Entwodiksyon

Thank you for choosing the Miele WMF111 WPS PWash 2.0 Front-load Washing Machine. This appliance is designed for high performance and efficiency, featuring an 8 kg load capacity, a maximum spin speed of 1600 RPM, and an A+++ energy efficiency rating. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new washing machine. Please read it thoroughly before first use and keep it for future reference.

This image shows a full front view of the Miele WMF111 WPS PWash 2.0 washing machine. The appliance is white with a chrome and white door, featuring the control panel at the top.

2. Enstriksyon Sekirite

Always observe the following safety precautions to prevent accidents and damage to the appliance.

• Sekirite elektrik: Ensure the washing machine is connected to a properly grounded electrical outlet (220-240V, 50Hz, 10A). Do not use extension cords or adapters.
• Koneksyon dlo: Connect the water inlet hose securely to a cold water supply. Ensure all connections are tight to prevent leaks.
• Sekirite timoun: Activate the child lock feature to prevent unintended operation by children. Keep packaging materials away from children.
• Plasman Aparèy: Place the machine on a firm, level surface. Do not install in areas prone to freezing temperatures.
• Antretyen: Toujou deploge aparèy la anvan ou netwaye li oswa anvan ou fè nenpòt antretyen.

3. Debalaj ak Enstalasyon

3.1 Debake

• Retire tout materyèl anbalaj yo, tankou baz polistirèn lan ak nenpòt fim pwoteksyon.
• Locate and remove the transport bolts from the rear of the machine. Keep these bolts for future transport.

3.2 Plasman

• The washing machine is a freestanding appliance. Place it on a stable, level floor.
• Ensure there is adequate ventilation around the machine.
• The door hinge is on the right side. Allow sufficient space for the door to open fully.

3.3 Koneksyon Dlo ak Elektrisite

• Konekte tiyo admisyon dlo a nan yon wobinèt dlo frèt.
• Position the drain hose into a suitable standpipe or sink, ensuring it is securely fixed to prevent displacement during draining.
• Ploge kòd elektrik la nan yon priz elektrik ki gen tè.

4. Inisyal Enstalasyon

Before washing clothes for the first time, it is recommended to run an empty wash cycle to clean the drum and remove any manufacturing residues.

1. Add a small amount of detergent to the main wash compartment of the dispenser.
2. Close the detergent dispenser and the washing machine door.
3. Select a short program, such as 'Quick Wash' or 'Cotton' at 60°C, without any laundry.
4. Kòmanse pwogram nan.

5. Operasyon Enstriksyon

5.1 Kontwòl Panel Overview

The control panel features a combination of buttons and a rotary dial for program selection, along with an integrated display for status and settings.

5.2 Chaje lesiv

• Louvri pòt machin lave a.
• Load laundry loosely into the drum, ensuring not to overload (maximum 8 kg).
• Fèmen pòt la byen fèm jiskaske li fè yon klik.

5.3 Ajoute detèjan ak adousisan twal

• Rale tiwa detèjan dispansè a.
• Vide kantite detèjan yo rekòmande a nan konpatiman lave prensipal la.
• Add fabric softener to the designated compartment, if desired.
• Push the dispenser drawer back in.

5.4 Program Selection and Settings

• Turn the rotary dial to select your desired wash program (e.g., Cotton, Delicates/Silk, Easy Care, Hand/Wool, Intensive/Outdoor, Mixed, Pre-wash, Sport).
• Use the buttons to adjust settings such as temperature, spin speed (up to 1600 RPM), and delayed start (up to 24 hours).
• The display will show the selected program and estimated remaining time.

5.5 Kòmanse ak fini yon sik

• Press the 'Start' button to begin the wash cycle.
• Machin nan ap kontinye otomatikman nan pwogram ki chwazi a.
• At the end of the cycle, an audible signal will sound, and the display will indicate 'End'.
• Louvri pòt la epi retire lesiv ou yo.

5.6 Timoun Lock

To activate or deactivate the child lock, refer to the specific instructions in your machine's display menu, typically involving holding down a combination of buttons for a few seconds.

6. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal machin lave ou a.

• Netwaye eksteryè a: Siye sifas eksteryè yo ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif.
• Netwayaj distribitè detèjan an: Retire tiwa dispansè a epi rense l anba dlo k ap koule pou retire tout rès detèjan.
• Netwaye tanbou a: Periodically run a maintenance wash cycle (e.g., 'Drum Clean' program or a hot cotton wash with no laundry and a descaling agent).
• Netwaye filtè a: Regularly check and clean the drain pump filter, located at the bottom front of the machine, to prevent blockages.

NAN. Depanaj

If you encounter issues with your washing machine, consult the following common solutions before contacting service.

• Machin nan pa kòmanse: Ensure the power cord is plugged in, the door is closed properly, and the 'Start' button has been pressed. Check for any error codes on the display.
• Dlo pa koule: Tcheke si tiyo drenaj la pliye oswa bloke. Netwaye filtè ponp drenaj la.
• Twòp bri/vibrasyon: Ensure the machine is level and all transport bolts have been removed. Check that the load is balanced.
• Kòd erè: Refer to the display for specific error codes. Consult the full Miele user manual for detailed explanations and solutions for each code.
• Adjusting Buzzer Volume: If the end-of-cycle tone is too loud or persistent, you can adjust it. On the display, hold both arrow keys simultaneously and navigate to 'Buzzer volume'. Then set the desired volume.

This image displays the 'Test Winner' badge awarded by Stiftung Warentest, a German consumer organization, to the Miele WMF 111 WPS washing machine. It received a 'Good' rating of 1.6 in their 11/2016 issue, specifically for 8 front-loading washing machines with 1600 RPM spin speed.

8. Espesifikasyon

9. Garanti ak sipò

Your Miele washing machine comes with a manufacturer's warranty. Please refer to the warranty card provided with your appliance for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, spare parts, or to schedule a service appointment, please contact Miele customer service. Contact information can typically be found on the Miele websit la oubyen nan dokimantasyon ki vini ak pwodwi ou a.