Manyèl Enstriksyon pou Machin Kafe Keurig K140

1. Pwodwi souview

The Keurig K140 is a versatile coffee maker designed for both commercial and personal use, compatible with K-Cup pods. It features a simple interface and a removable water reservoir for easy refilling and cleaning.

Figi 1: Devan view of the Keurig K140 Coffee Maker.

Key components include the water reservoir, K-Cup pod holder, control panel with brew size buttons, and a removable drip tray.

2. Enstalasyon

1. Depakete machin brasri a: Remove all packaging materials and place the brewer on a stable, level surface.
2. Rinse the Water Reservoir: Wash the water reservoir and its lid with warm, soapy water. Rinse thoroughly and dry.
3. Ranpli Rezèvwa Dlo a: Fill the reservoir with fresh, filtered water up to the "MAX FILL" line. Place the lid back on the reservoir.
4. Pouvwa sou: Branche machin kafe a nan yon priz ki gen tè. Bouton pouvwa a ap limen.
5. Premye melanj netwayaj:
   • Mete yon tas gwo sou plato a degoute.
   • Lift and lower the brewer handle without inserting a K-Cup pod.
   • Select the largest brew size.
   • Press the brew button. This will dispense hot water to clean the internal components. Discard the hot water.

Brasri a se kounye a pare pou itilize.

3. Operasyon Enstriksyon

1. Asire nivo dlo a: Check that the water reservoir has sufficient water for your desired brew size. Refill if necessary.
2. Mete kapsil K-Cup la: Leve manch machin kafe a. Mete yon kapsil K-Cup nan sipò kapsil K-Cup la. Desann manch lan nèt pou fèmen kouvèti a.
3. Mete tas la: Mete yon tas oubyen yon tas sou plato degoute a.
4. Chwazi gwosè kafe a: The control panel will display "READY TO BREW". Select your desired brew size using the illuminated buttons.
5. Kòmanse melanje: Press the selected brew size button. The brewer will begin the brewing process.
6. Jwi: Once brewing is complete, carefully remove your mug. Lift the handle to eject the used K-Cup pod into the discard bin.

Atansyon: Do not remove the K-Cup pod holder during brewing. The K-Cup pod contains hot liquid and sharp needles.

4. Antretyen

Regular cleaning and maintenance ensure optimal performance and longevity of your Keurig K140 brewer.

4.1. Cleaning the Drip Tray

• The drip tray can be easily removed for cleaning. Simply slide it out from the base of the brewer.
• Wash the drip tray and its cover with warm, soapy water. Rinse thoroughly and dry.
• Reinsert the drip tray into the brewer.

4.2. Cleaning the Water Reservoir

• Remove the water reservoir from the brewer.
• Wash with warm, soapy water. For thorough cleaning, a soft brush can be used.
• Rinse completely and dry before reattaching to the brewer.

4.3. Cleaning the K-Cup Pod Holder

• Lift the brewer handle. Grasp the top of the K-Cup pod holder and pull it upwards to remove it.
• Separate the funnel from the pod holder.
• Wash both parts with warm, soapy water. Pay attention to the exit needle inside the pod holder.
• Reassemble the pod holder and reinsert it into the brewer.

4.4. Detartraj

Over time, calcium deposits (scale) can build up in your brewer. Descaling is important to maintain performance. Refer to the official Keurig website or your product's specific descaling instructions for the recommended procedure and descaling solution.

NAN. Depanaj

6. Espesifikasyon

7. Garanti ak sipò

For detailed warranty information, please refer to the warranty card included with your product or visit the official Keurig website. For technical support or service inquiries, please contact Keurig customer service directly.

Resous sou entènèt: www.keurig.com