Entwodiksyon
The QualGear QG-TM-020-BLK Ultra Low Profile Articulating TV Wall Mount is designed for most 23 to 42 inch LED and LCD flat-panel televisions, supporting weights up to 66 lbs. This full-motion mount provides a wide range of movement, including panning, tilting, and swiveling, to optimize your viewing experience. It features integrated cable management and decorative covers for a clean installation. Built-in level adjustment ensures a perfectly level display.
Enfòmasyon sou Sekirite
Always read and understand all instructions before installation and use. If you have any questions, contact QualGear customer support. Ensure the mounting surface can safely support the combined weight of the mount and your television. Use appropriate tools and follow all drilling and mounting guidelines. Improper installation may result in serious injury or damage.
Kontni pake
Image: Components included in the QualGear QG-TM-020-BLK TV mount package, showing the mount, various screws, spacers, and the instruction manual.
- QG-TM-020-BLK TV mount
- Manyèl koulè
- Wall marking template
- Bwat kado
- Pre-sorted hardware pack (for wood studs, concrete, and brick surfaces)
- Nivo jarèt
Espesifikasyon
Image: Technical diagram illustrating the dimensions, tilt, and swivel capabilities of the QualGear QG-TM-020-BLK mount.
- Mòn Style: Artikulasyon mòn
- Gwosè televizyon konpatib: 23 a 42 pous
- Kapasite maksimòm pwa: Jiska 66 liv (30 kg)
- VESA Mounting Hole Patterns (mm): 75x75, 100x100, 200x100, 200x200
- Panche Range: +5 degrees to -15 degrees
- Ranje Swivel: 90 degrees left or right
- Ekstansyon soti nan mi: 1.8 inches (45.7 mm) to 19.5 inches (497 mm)
- Ajisteman Nivo: 3 degre nan sans zegwi mont lan ak nan sans kontrè zegwi mont lan
- Materyèl: Alloy Steel
- Dimansyon pwodwi: 12.88 x 11.22 x 2.48 pous (32.7 x 28.5 x 6.3 cm)
- Pwa atik: 7 liv (3.17 kg)
Tcheke konpatibilite televizyon
Image: Visual guide for checking TV compatibility, detailing supported screen sizes, maximum weight, and VESA patterns.
- Size of TV: Supports most 23 to 42-inch TVs.
- Weight of TV: Supports TVs weighing up to 66 lbs.
- Mounting Hole Patterns (VESA) in mm: Supports standard mounting hole patterns from 75x75, 100x100, 200x100, 200x200.
Enstalasyon ak Enstalasyon
For detailed step-by-step instructions, please refer to the complete manual provided in the package or scan the QR code on the 'What You Will Get' image for a digital version: Digital Manual Link
Zouti obligatwa (pa enkli)
- Tep distributeur
- Mezire tep
- Nivo Lespri Bondye
- Drill Bit (Wood: 5/32 in (4 mm), Concrete: 5/16 in (8 mm))
- Stud Detektè
- Fè egzèsis
- Socket & Wrench
- Kreyon
- Tournvis
Enstalasyon finiview
The installation process involves mounting the wall plate to your desired surface (wood stud, concrete, or brick) and then attaching the TV plate to the back of your television. Finally, the TV is secured onto the wall plate. Ensure all connections are tight and secure before releasingade televizyon an.
Video: An Amazon Basics video demonstrating the assembly process for a full motion TV mount. This video provides a visual guide to the installation steps, including attaching the mount to the wall and securing the TV.
Enstriksyon Operasyon
Image: The QualGear QG-TM-020-BLK mount fully extended, showcasing bra atikile li yo ak plak VESA a.
Image: A television mounted on the QualGear QG-TM-020-BLK, illustrating the range of motion for tilting and swiveling to achieve optimal viewang ing.
- Ekstansyon: Gently pull the TV away from the wall to extend the articulating arm.
- Retraksyon: Push the TV gently back towards the wall until it is in the desired position. The super slim design allows the TV to sit just 1.8 inches from the wall when fully retracted.
- Swivel: Carefully pivot the TV left or right to achieve a 90-degree swivel in either direction.
- Enklinezon: Adjust the tilt angle of the TV from +5 degrees (upward) to -15 degrees (downward) to reduce glare and find the best viewang ang.
- Nivelman: Utilize the post-installation leveling adjustments to ensure the TV is perfectly horizontal after hanging.
Antretyen
Regularly check all screws and connections to ensure they remain tight and secure. Dust the mount and TV with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners. Periodically inspect the mount for any signs of wear or damage. If any issues are found, discontinue use and contact customer support.
Depanaj
- TV not level: Use the built-in level adjustment feature to correct the angle.
- Difikilte pou deplase bra a: Ensure all adjustment bolts are sufficiently loosened. If the arm is too stiff, apply a small amount of silicone-based lubricant to the pivot points.
- Mòn nan santi l enstab: Re-check all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate anchors are used for masonry. Do not exceed the maximum weight capacity.
Garanti ak sipò
The QualGear QG-TM-020-BLK Articulating TV Wall Mount comes with a 3 ane garanti limite. For warranty claims, technical assistance, or any product-related inquiries, please contact QualGear customer support through their official websit la oswa enfòmasyon kontak ki nan anbalaj pwodwi ou a.