Paulmann 28325 LED Diamond Quadro GU5.3 12V 2700K Instruction Manual

1. Entwodiksyon ak pwodwi aview

This manual provides essential information for the safe and efficient use of your Paulmann 28325 LED Diamond Quadro lamp. This product is a 3-watt LED lamp designed for 12-volt systems, featuring a GU5.3 base and emitting a warm white light at 2700 Kelvin. Its unique crystal reflector design provides directed illumination.

Image 1.1: The Paulmann 28325 LED Diamond Quadro GU5.3 lamp.

2. Enstriksyon Sekirite

Please read and understand all safety instructions before installing or operating the lamp. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Sekirite elektrik: Always disconnect power to the fixture before installing, removing, or servicing the lamp.
• Voltage konpatibilite: Sa a lamp operates on a 12-volt DC power supply. Do not connect it to a 230-volt AC mains supply without a suitable transformer.
• Ki pa dimmable: Sa a ki ap dirije lamp is pa dimmable. Do not use it with dimmer switches, as this can damage the lamp epi anile garanti a.
• Evalyasyon IP20: L laamp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use only in dry, indoor environments.
• Tanperati: Asire bon jan vantilasyon alantou l laamp to prevent overheating. Do not cover the lamp.
• Demonte: Do not attempt to disassemble, modify, or repair the lamp. Pa gen okenn pati itilizatè-reparasyon andedan.
• Dispozisyon: Jete lamp according to local regulations for electronic waste.

3. Enstalasyon ak Enstalasyon

Follow these steps to properly install your Paulmann 28325 LED Diamond Quadro lamp:

1. Dekoneksyon pouvwa: Ensure the power supply to the lighting fixture is completely switched off at the main circuit breaker before beginning installation.
2. Identify Socket: Verify that your fixture has a compatible GU5.3 socket. The GU5.3 base features two pins spaced 5.3mm apart.
3. Mete Lamp: Carefully align the two pins of the LED lamp with the holes in the GU5.3 socket. Gently push the lamp into the socket until it is securely seated. Do not force the lamp.
4. Pwovizyon pou pouvwa: Ensure the fixture is connected to a stable 12-volt DC power supply. If replacing a halogen lamp, ensure the existing transformer is compatible with LED loads.
5. Retabli pouvwa: Yon fwa ke lamp is securely installed, restore power to the fixture at the main circuit breaker.

Image 3.1: Close-up of the GU5.3 LED lamp, showing the base pins.

Image 3.2: Diagram showing different lamp base types, including GU5.3 (12V section).

4. Operasyon Enstriksyon

Operating the Paulmann 28325 LED Diamond Quadro lamp se senp:

• Bouton On/Off: Use the standard wall switch or fixture switch to turn the lamp sou oswa koupe.
• Sòti limyè: L laamp provides a directed, warm white light (2700K) suitable for accent lighting or general illumination in appropriate fixtures.
• Ki pa dimmable: As stated previously, this lamp is not designed for dimming. Attempting to dim it may cause flickering, damage, or premature failure.

5. Antretyen

The Paulmann 28325 LED Diamond Quadro lamp requires minimal maintenance due to its long lifespan and durable design.

• Netwayaj: Pou netwaye lamp, ensure the power is off and the lamp is cool. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lamp's finish or internal components.
• Lamp Ranplasman: L laamp has an average lifespan of 15,000 hours. When it reaches the end of its life, replace it with a new Paulmann 28325 LED Diamond Quadro lamp or a compatible GU5.3 12V LED lamp.
• Pa gen okenn pati itilizatè yo ka fè sèvis: L laamp contains no user-serviceable parts. Do not attempt to open or repair it.

NAN. Depanaj

If you encounter issues with your Paulmann 28325 LED Diamond Quadro lamp, al gade nan gid depanaj sa a:

• Lamp Does Not Light Up:
  • Ensure the power supply to the fixture is on.
  • Tcheke ke lamp is correctly and securely seated in the GU5.3 socket.
  • Verify that the power supply is providing 12 volts DC. An incompatible or faulty transformer can prevent the lamp soti nan travay.
  • Enspekte lamp for any visible damage. If damaged, replace the lamp.
• Lamp Flickers:
  • Konfime ke lamp is not connected to a dimmer switch. This lamp se ki pa dimmable.
  • Check the 12V DC power supply for stability. Fluctuations in voltage can cause flickering.
  • Ensure the transformer is compatible with LED loads. Some older transformers designed for halogen lamps may not work correctly with LEDs.
• Light Output is Weak or Incorrect Color:
  • Verifye lamp specifications match your requirements (e.g., 2700K warm white).
  • Asire lamp is receiving the correct 12V DC voltage. Under-voltage can reduce light output.

If these steps do not resolve the issue, please contact Paulmann customer support.

7. Espesifikasyon

Detailed technical specifications for the Paulmann 28325 LED Diamond Quadro lamp:

Image 7.1: EU Energy Label for Paulmann 28325.

Image 7.2: Product data sheet with detailed specifications.

For more detailed product information, you can refer to the EPREL database: https://eprel.ec.europa.eu/qr/860106

8. Garanti ak sipò

Paulmann products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Paulmann websit oswa kontakte revandè ou a.

Kenbe resi acha ou a kòm prèv acha pou nenpòt reklamasyon garanti.