1. Entwodiksyon
This manual provides essential information for the safe and efficient operation of the MEAN WELL LRS-350-24 Single Output Switchable Power Supply. Please read this manual thoroughly before installation and use.

Figure 1: MEAN WELL LRS-350-24 Power Supply. This image shows the enclosed power supply unit with its ventilation grille, terminal block, and model label.
2. Enfòmasyon sou Sekirite
- Asire bon baz pou anpeche chòk elektrik.
- Pa opere aparèy la nan kote ki mouye oswa ki pa klere.amp kondisyon yo.
- Verify opinyon voltage selection switch (115VAC/230VAC) is set correctly before connecting to power. Incorrect setting can cause damage.
- Enstalasyon ta dwe fèt pa pèsonèl kalifye.
- Pa louvri fil kouran an casing; pa gen okenn pyès itilizatè a ka repare anndan an.
- Asire bon jan vantilasyon pou anpeche surchof.
- Disconnect power before performing any maintenance or wiring changes.
3. Pwodwi souview
3.1 Karakteristik
- AC input range selectable by a switch.
- Withstands 300 VAC surge input for 5 seconds.
- No load power consumption below 0.75W.
- 1U ba profile konsepsyon.
- High operating temperature, up to 70°C.
- Pwoteksyon: Kout sikwi, Surcharge, Plis pase voltage, Over temperature.
- Built-in cooling fan with ON-OFF control.
- Compliance to UL 60950-1.
- Withstands 5G vibration test.
- High efficiency, long life, and high reliability.
- LED indicator for power on status.
- 100% chaj plen tès boule-an.
- 3-ane garanti.
3.2 Aplikasyon
- Industrial automation machinery.
- Sistèm kontwòl endistriyèl yo.
- Mechanical and electrical equipment.
- Electronic instruments, equipment, or apparatus.

Figi 2: Plis paseview of LRS-350 series features and typical applications. This image displays a summary of the power supply's capabilities and suitable uses.
4. Enstalasyon ak Enstalasyon
4.1 Tcheke Pre-Enstalasyon
Before installation, ensure the power supply is undamaged and that all necessary components are available. Verify the input voltage requirement of your application matches the power supply's capabilities.
4.2 AC Antre Voltage Seleksyon
The LRS-350-24 features an AC input range selectable by a switch. Locate the switch on the side of the unit. Set it to either 115VAC (for 90-132VAC input) or 230VAC (for 180-264VAC input) according to your local mains voltage. Failure to set this correctly can result in damage to the unit.
4.3 Koneksyon fil elektrik
Connect the power supply using the screw terminal block. Refer to the mechanical specification diagram for terminal assignments.
- Antre AC: Connect Live (L), Neutral (N), and Ground (FG) to the corresponding input terminals.
- DC Sòti: Connect the positive (+) and negative (-) load wires to the DC OUTPUT terminals.

Figure 3: Mechanical dimensions and terminal block assignments for the LRS-350 series. This diagram provides physical measurements and pinout details for wiring.
4.4 Montaj
Mount the power supply in a location that allows for adequate airflow around the unit, especially near the cooling fan. Use appropriate screws and mounting points as indicated in the mechanical specification diagram.
5. Operasyon Enstriksyon
5.1 pouvwa sou
After ensuring all connections are secure and the AC input voltage switch is correctly set, apply AC power. The LED indicator on the unit will illuminate, indicating that the power supply is operational.
5.2 Sòti Voltage Ajisteman
Vol la pwodiksyontage can be finely adjusted using the potentiometer located near the output terminals. Use a small screwdriver to carefully turn the potentiometer to achieve the desired output voltage within the specified range (typically 21.6V to 28.8V for the 24V model).
5.3 Operasyon Vantilatè Refwadisman
The built-in cooling fan operates with ON-OFF control, activating automatically when the internal temperature reaches a certain threshold to maintain optimal operating conditions. It will turn off when the temperature drops.
6. Antretyen
The LRS-350-24 power supply is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance.
- Netwayaj: Ensure ventilation openings are free from dust and debris. Use a soft, dry cloth or compressed air to clean the exterior. Do not use liquid cleaners.
- Koneksyon: Periodically check all wiring connections to ensure they remain tight and secure.
- Anviwònman: Maintain the operating environment within specified temperature and humidity ranges to prolong the unit's lifespan.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pwodiksyon voltage / LED etenn |
|
|
| Sòti voltage twò ba oswa enstab |
|
|
| Fan is loud or constantly running |
|
|
8. Espesifikasyon
Detailed electrical and mechanical specifications for the MEAN WELL LRS-350-24 power supply.

Figure 4: Comprehensive specification table for the LRS-350 series, including input, output, protection, and environmental data.
| Paramèt | Valè |
|---|---|
| Modèl | LRS-350-24 |
| Volim Sòti Prensipaltage (VDC) | 24 |
| Sòti Kouran (A) | 14.6 |
| Maksimòm pwodiksyon pouvwa (W) | 350.4 |
| Antre Voltage (VAC) | 90 to 132 / 180 to 264 (selectable) |
| Frekans Antre (Hz) | 47 a 63 |
| Maksimòm Antre Kouran (A) | 6.8 |
| Sòti Connector Kalite | Blòk tèminal vis |
| Kantite Sòti yo | 1 |
| Faktè fòm | Ki fèmen |
| Dimansyon pwodwi (L x W x H) | 8.46 x 1.18 x 4.53 pous |
| Pwa atik | 1.64 liv |
| Metòd refwadisman | Air (Built-in fan) |
| Tanperati Fonksyònman | Jiska 70 ° C |
| Pwoteksyon | Kout kous, Surcharge, Plis pase voltage, sou tanperati |
| Konfòmite | UL 60950-1 |
| Garanti | 3 ane |

Figure 5: Block diagram illustrating the internal structure and performance curves (derating, static characteristics) of the LRS-350 series.
9. Garanti ak sipò
The MEAN WELL LRS-350-24 power supply comes with a 3-ane garanti soti nan dat acha a. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.
For technical support, warranty claims, or service inquiries, please contact your authorized MEAN WELL distributor or reseller. Do not attempt to repair the unit yourself, as this will void the warranty and may pose safety risks.