Teesa TSA3015B Juicer Instruction Manual

1. Enstriksyon Sekirite Enpòtan

Please read these instructions carefully before using the appliance and keep them for future reference. Incorrect use may lead to injury or damage to the appliance.

• Always ensure the appliance is switched off and unplugged from the power outlet before assembly, disassembly, or cleaning.
• Pa plonje baz motè a nan dlo oswa nan okenn lòt likid. Netwaye ak yon zouti.amp twal sèlman.
• Keep hands and utensils out of the feed chute during operation to prevent injury and damage to the juicer. Always use the food pusher provided.
• Ensure all parts are correctly assembled and locked into place before operating the juicer.
• Do not operate the appliance if the power cord, plug, or any other part is damaged. Contact authorized service personnel for repair.
• Aparèy sa a se pou itilize nan kay la sèlman. Pa sèvi ak deyò.
• Sipèvize timoun yo pou asire yo pa jwe ak aparèy la.
• Evite kontak ak pati k ap deplase.
• Do not process frozen fruits or vegetables, or ingredients with hard seeds/pits (e.g., peaches, cherries, avocados) without removing the pits first.

2. Pwodwi souview ak Konpozan

Familiarize yourself with the parts of your Teesa TSA3015B Juicer before first use.

1. Pusher Manje
2. Kouvèti transparan
3. Wide Feed Chute
4. Filter Basket (Stainless Steel)
5. Juice Collector Base
6. Baz Motè ak Kadran Kontwòl
7. Pulp Container (1.2 L capacity)
8. Juice Cup (0.5 L capacity)

Imaj: The wide feed chute and transparent lid, designed for processing whole fruits and vegetables.

Imaj: The separate juice cup (0.5 L) and pulp collector (1.2 L) for efficient juice extraction and waste management.

3. Enstalasyon ak Asanble

Follow these steps to correctly assemble your juicer before use:

1. Mete baz motè a sou yon sifas ki estab, plat epi sèk.
2. Position the juice collector base onto the motor base, ensuring it is securely seated.
3. Insert the stainless steel filter basket into the juice collector base. Ensure it is firmly in place and rotates freely.
4. Place the transparent lid onto the juice collector base, aligning the locking mechanism.
5. Attach the pulp container to the back of the juicer, underneath the pulp spout.
6. Mete gode ji a anba ji a.
7. Ensure the safety locking arms are engaged and locked into position. The juicer will not operate if not properly locked.

4. Operasyon Enstriksyon

Prepare your ingredients and operate the juicer as follows:

4.1. Preparasyon Engredyan yo

• Lave tout fwi ak legim byen.
• For fruits with hard pits or large seeds (e.g., mangoes, peaches, cherries), remove them before juicing.
• Peel citrus fruits (oranges, lemons, grapefruits) as their peels can impart a bitter taste.
• Cut larger fruits and vegetables into pieces that fit comfortably into the wide feed chute. The 76mm diameter chute can accommodate many whole items.

4.2. Pwosesis Juicing

1. Ensure the juicer is correctly assembled and the juice cup and pulp container are in place.
2. Ploge aparèy la nan yon priz kouran apwopriye.
3. Vire bouton kontwòl la sou vitès ou vle a:
• '0': Off
• '1': Low speed, suitable for softer fruits and vegetables (e.g., berries, tomatoes, grapes).
• '2': High speed, suitable for harder fruits and vegetables (e.g., carrots, apples, celery).
• 'P': Pulse function, for short bursts of maximum power. Hold the dial in this position for a few seconds, then release.
4. With the motor running, gently feed the prepared ingredients into the feed chute using the food pusher. Do not force ingredients down.
5. The fresh juice will flow into the juice cup, and the pulp will collect in the pulp container.
6. When finished, turn the control dial to '0' and unplug the appliance.

Imaj: The control dial for selecting speed settings (0, 1, 2) and the pulse function (P).

5. Netwayaj ak antretyen

Netwayaj regilye asire pèfòmans optimal epi pwolonje lavi ji ou a.

1. Anvan Netwayaj: Always switch off the appliance and unplug it from the power outlet.
2. Demonte: Disassemble the juicer in reverse order of assembly.
3. Cleaning Parts:
• Rinse the transparent lid, food pusher, filter basket, juice collector base, pulp container, and juice cup under running water immediately after use.
• Use a cleaning brush (if provided) to remove pulp from the filter basket. Ensure all mesh holes are clear to maintain juicing efficiency.
• Wash these parts in warm, soapy water. Rinse thoroughly and dry. Most removable parts are dishwasher safe (top rack only), but hand washing is recommended for longevity.
4. Netwayaj Baz Motè a: Siye baz motè a ak anonsamp cloth. Do not immerse it in water or spray it with water.
5. Tach fè tèt di: For stubborn stains on plastic parts, a non-abrasive cleaner can be used. Avoid abrasive pads or harsh chemicals.
6. Depo: Asire w tout pyès yo byen sèk anvan ou rasanble oswa sere ji a. Sere l nan yon kote ki fre epi sèk.

NAN. Depanaj

Si ou rankontre pwoblèm ak ji ou a, gade pwoblèm ak solisyon komen sa yo:

If the problem persists after trying these solutions, please contact Teesa customer support.

7. Espesifikasyon

8. Garanti ak sipò

Your Teesa TSA3015B Juicer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, service, or to inquire about replacement parts, please contact Teesa customer service through their official websit la oswa enfòmasyon kontak yo bay nan dokimantasyon pwodwi ou a.

When contacting support, please have your model number (TSA3015B) and proof of purchase readily available.