Tornado Electric Water Heater 30 Liter

1. Pwodwi souview

The Tornado Electric Water Heater Model TEEE-30MW is designed to provide efficient and reliable hot water for your household needs. This 30-liter capacity water heater features a durable enameled inner tank, advanced safety mechanisms, and an intuitive LED indicator for heating status. Its compact design and robust construction ensure long-lasting performance.

Figi 1: Devan view of the Tornado Electric Water Heater.

Karakteristik kle:

• Kapasite: 30 lit
• Pouvwa: 1500 Watts
• Endikatè ki ap dirije: Illuminates during the water heating process.
• Inner Tank: Enameled and anti-rust for extended durability.
• Karakteristik sekirite: Equipped with an overheat sensor, dry heating sensor, and a non-return safety valve.
• Eleman chofaj: Copper heating element with magnesium anodes for corrosion protection.
• Materyèl kò: Specially treated to resist water vapor and humidity.
• Kontwòl Panel: Convenient front-mounted control panel.
• Izolasyon: High-density insulating foam for energy efficiency.
• Auto-rekòmanse: Automatic restart function.

2. Enstalasyon ak Enstalasyon

Proper installation is crucial for the safe and efficient operation of your water heater. It is highly recommended that installation be performed by a qualified professional.

2.1 Enstalasyon Chofaj Dlo a

1. Select a suitable wall location capable of supporting the water heater's weight when full (approximately 45 kg for the 30-liter model).
2. Mark the positions for the mounting brackets on the wall. Ensure the marks are level and correctly spaced according to the unit's dimensions.
3. Drill holes and securely fasten the mounting brackets to the wall using appropriate hardware (not included).
4. Carefully lift and hang the water heater onto the installed brackets, ensuring it is stable and level.

Figi 2: Side view with mounting brackets and connections.

2.2 Koneksyon dlo

1. Identify the cold water inlet (usually marked blue or with a blue ring) and the hot water outlet (usually marked red or with a red ring). Both connections are 1/2 G.
2. Install the non-return safety valve on the cold water inlet pipe. This valve prevents water backflow and excessive pressure buildup.
3. Connect the cold water supply line to the inlet and the hot water output line to the outlet. Use appropriate plumbing fittings and ensure all connections are watertight.
4. Open the main water supply and check for any leaks. Allow the tank to fill completely before proceeding to electrical connection.

2.3 Koneksyon elektrik

1. Ensure the water heater is properly grounded to prevent electrical hazards.
2. Konekte aparèy chofaj dlo a nan yon sikwi elektrik dedye ak vòltaj apwopriye.tage and current ratings (1500W).
3. Verify that all electrical connections are secure and comply with local electrical codes.

3. Operasyon Enstriksyon

Once installed and filled with water, your Tornado Electric Water Heater is ready for operation.

3.1 Limen ak Off

• To turn on the water heater, ensure it is plugged into a suitable power outlet and the main power switch (if applicable) is in the 'ON' position.
• The 'Power On' indicator light will illuminate, indicating the unit is receiving power.
• To turn off the water heater, switch off the main power or unplug the unit.

Figure 3: Power On and Heating indicators.

3.2 Ajisteman Tanperati

• The water heater features a temperature dial on the front panel, ranging from 'MIN' to 'MAX'.
• Rotate the dial to your desired temperature setting. Turning towards 'MAX' will increase the water temperature.
• The 'Heating' indicator light will illuminate when the water heater is actively heating water and will turn off once the set temperature is reached.

Figure 4: Temperature adjustment dial.

4. Antretyen

Antretyen regilye asire lonjevite ak efikasite aparèy chofaj dlo ou a.

4.1 Netwayaj jeneral

• Siye deyò chofe dlo a detanzantan avèk yon twal mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Ensure the area around the water heater is kept clean and free from obstructions.

4.2 Anode Rod Inspection and Replacement

• The water heater is equipped with magnesium anodes to protect the inner tank from corrosion.
• These anode rods should be inspected annually by a qualified technician and replaced if significantly depleted.

4.3 Vide tank la

• If the water heater will be out of use for an extended period or in areas prone to freezing, the tank should be drained.
• Fèmen ekipman pou chofaj dlo a.
• Fèmen tiyo inlet dlo frèt la.
• Louvri yon wobinèt dlo cho lakay ou pou soulaje presyon.
• Konekte yon tiyo nan valv drenaj ki anba aparèy chofaj dlo a epi dirije l nan yon drenaj ki apwopriye.
• Open the drain valve and allow all water to empty from the tank.

4.4 Safety Valve Check

• Periodically check the non-return safety valve for proper operation. Refer to the safety valve manufacturer's instructions for specific testing procedures.

NAN. Depanaj

Anvan ou kontakte sèvis kliyan, tanpri gade gid depanaj sa a pou pwoblèm komen yo.

Karakteristik sekirite: The water heater is equipped with an overheat sensor and a dry heating sensor. If these sensors detect abnormal conditions, the heater may automatically shut off to prevent damage. If this occurs, turn off the power, wait for the unit to cool, and then restart. If the problem persists, contact customer support.

6. Spécifications pwodwi

Detailed technical specifications for the Tornado Electric Water Heater Model TEEE-30MW.

Figi 5: Dimansyon pwodwi a.

7. Garanti ak sipò

7.1 Enfòmasyon sou Garanti

This Tornado Electric Water Heater Model TEEE-30MW comes with a 5-year full free warranty provided by the manufacturer/brand from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims.

7.2 Sipò pou Kliyan

For any technical assistance, warranty claims, or further inquiries, please contact Tornado customer service. Refer to your product packaging or the manufacturer's official websit la pou jwenn enfòmasyon kontak ki pi resan yo.