KanexPro Full-Motion Tilt/Swivel TV Wall Mount Instruction Manual

1. Entwodiksyon

This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your KanexPro Full-Motion Tilt/Swivel TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

Enfòmasyon sou Sekirite

• Asire w ke sifas montaj la ka sipòte pwa konbine montaj la ak televizyon an san danje.
• Pa depase kapasite pwa maksimòm lan ki se 66 liv (30 kg).
• Always use appropriate safety equipment during installation.
• Consult a qualified professional if you are unsure about the installation process or wall type.
• Kenbe timoun ak bèt kay lwen pandan enstalasyon an.

2. Pake kontni

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the mount. Contact customer support for assistance.

• Full-Motion TV Wall Mount Assembly
• Materyèl pou monte sou miray la (vis, lank)
• TV Mounting Hardware (various screw sizes, spacers)
• Manyèl Enstriksyon

Imaj 2.1: Plis paseview of the KanexPro Full-Motion Tilt/Swivel TV Wall Mount. This image displays the main assembly of the wall mount, including the wall plate, articulating arms, and the VESA compatible TV plate.

3. Enstalasyon ak Enstalasyon

Follow these steps carefully to ensure a secure and stable installation of your TV wall mount.

3.1 Chèk Pre-Enstalasyon

• Kalite miray: Determine if your wall is solid concrete, brick, or wood stud. Different wall types require specific mounting hardware.
• Stud Finder: If mounting to wood studs, use a stud finder to locate the center of the studs.
• Zouti obligatwa: Drill, level, tape measure, pencil, Phillips head screwdriver, socket wrench.
• Televizyon konpatibilite: Ensure your TV's VESA pattern and weight are within the mount's specifications. This mount is compatible with Hisense Roku TV 40H4 and similar models up to 66 lbs.

3.2 Monte Plak Miray la

1. Position the wall plate on the desired location on the wall. Use a level to ensure it is perfectly horizontal.
2. Mark the drilling holes with a pencil.
3. Drill pilot holes according to the marked positions and your wall type. For wood studs, drill 5/32 inch (4mm) holes. For concrete/brick, drill 3/8 inch (10mm) holes and insert wall anchors.
4. Attach the wall plate to the wall using the provided lag bolts and washers. Tighten securely.

3.3 Attaching the TV Plate to the Television

1. Mete televizyon an ak anpil atansyon fas anba sou yon sifas mou epi pwòp.
2. Idantifye twou VESA aliye yo sou do a nan televizyon ou.
3. Select the appropriate screws and spacers from the provided hardware kit that fit your TV's mounting holes.
4. Attach the TV plate (the part of the mount that connects to the TV) to the back of your television. Ensure it is centered and securely fastened. Do not overtighten.

3.4 Hanging the Television

1. With assistance, carefully lift the television with the attached TV plate.
2. Align the TV plate with the articulating arms of the wall-mounted assembly.
3. Hook the TV plate onto the arms and ensure it is securely seated.
4. Engage any safety locking mechanisms if present on your mount to prevent accidental dislodgement.

Image 3.1: Technical diagram illustrating the dimensions and articulation range of the KanexPro Full-Motion TV Wall Mount. This diagram shows the mount's extension, swivel, and tilt capabilities, along with key measurements in millimeters.

4. Itilizasyon Mòn nan

Your KanexPro Full-Motion TV Wall Mount allows for flexible positioning of your television.

• Ajisteman Swivel: The mount allows for 90 degrees of swivel to the left and right. Gently push or pull the TV to achieve the desired viewang ang.
• Ajisteman enklinezon: The mount offers a tilt range of +20 to -20 degrees. Loosen the tilt adjustment knobs (if present), adjust the TV to the desired vertical angle, and then re-tighten the knobs to secure the position.
• Ekstansyon: The articulating arms allow the TV to be extended away from the wall for optimal viewing or retracted for a flush profile.

Always move the TV smoothly and avoid sudden, forceful movements. Ensure all cables have enough slack to accommodate the full range of motion without tension.

5. Antretyen

Antretyen regilye ede asire lonjevite ak fonksyònman an sekirite nan sipò miray televizyon ou an.

• Netwayaj: Siye montur la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan ki ka domaje fini an.
• Tèks Peryodik: Every 3-6 months, inspect all screws and bolts to ensure they are still tight. Re-tighten if necessary. Check for any signs of wear or damage to the mount components.
• Lubrifikasyon: The articulating joints are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points.

NAN. Depanaj

Si ou rankontre pwoblèm ak sipò miray televizyon ou an, gade pwoblèm ak solisyon komen sa yo.

7. Espesifikasyon

• Mak: KanexPro
• Modèl: Full-Motion Tilt/Swivel TV Wall Mount
• Kalite montaj: Mi mòn
• Kalite mouvman: Articulating, Swivel, Tilt
• Materyèl: Alloy Steel
• Koulè: Nwa
• Aparèy konpatib: Television (e.g., Hisense Roku TV 40H4)
• Kapasite maksimòm pwa: 66 liv (30 kg)
• Karakteristik pivotan: 90 Degrees Left to Right
• Karakteristik enklinezon: +20 to -20 Degrees
• Pre-resanble: Yes, for quick installation

8. Garanti ak sipò

For warranty information or technical support, please contact KanexPro customer service directly. Refer to the product packaging or the official KanexPro websit pou detay kontak.

Please have your product model information and purchase date available when contacting support.